DQ Technology VisionNet W203ER-4
From TechInfoDepot
Jump to navigationJump to searchbg (G54) | |
|---|---|
| wireless router, dsl modem | |
| 3rd Party Firmware | |
| dd-wrt | |
| OpenWrt |
Incompatible |
| Tomato any flavor |
Incompatible |
| Platform | |
| Brand • Model • Rev |
DQ Technology VisionNet W203-4 |
| FCC ID | |
| Type |
wireless router, dsl modem |
| CPU1 |
Texas Instruments TNETD7300A |
| CPU1 Type |
MIPS 4KEc |
| CPU1 Speed |
160 MHz |
| Flash1 Chip |
Macronix MX29LV320ABTC-90 |
| Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
| RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Chip |
SK hynix HY57V281620HCT-H |
| ETH chip1 |
Texas Instruments TNETD7300A |
| Switch |
Marvell 88E6060 |
| Ethernet Port Count |
4-100MbE-LAN |
| Wired Standard |
IEEE 802.3i/3u |
| Stock bootloader |
PSPBoot 1.2.1.5 |
| Stock FW OS |
Linux 2.4.17_mvl21-malta-mips_fp_le MontaVista |
| Expansion IF types |
Mini PCI |
| Mini PCI slots |
1 |
| Power |
12 VDC, 1 A |
| Connector type |
barrel 5 mm (OD) 2.5 mm (ID) 10 mm (LEN) |
| Serial Port (UART) |
yes, 3-pin header, internal, populated, 3.3V TTL, (9600 8N1), J101 |
|
Flags: ADSL | |
| Other | |
|
Default SSID: stiwifi | |
| Manuf/OEM/ODM |
XAVi XW203ER-4 (01-SSC-5515) |
| Retail | |
| (Est.) release date | 2005 |
| Country of manuf | China |
| Radio 1 | |
| Radio1 module |
unknown |
| Radio1 module IF |
Mini PCI |
| Chip1 |
Texas Instruments TNETW1130 |
| Chip2 |
Radia RC2422B |
| Wireless interface OUI |
00:01:38 |
| Antenna Connector Type |
U.FL, RP-SMA |
| Wireless Standard |
IEEE 802.11b/g |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Radia chipsets with specifications, see Radia.
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Overview
There is no FCC ID printed on the unit (but there is a FCC registration number).
- The power adapter that came with the unit is an OEM AD-121A (12V, 1A).
- ID/OD/Len measurements are approximate.
Credentials
Multiple credentials appear to be usable with the HTTP interface.
admin/sti.admin5 or xavi886/xavi886
The default credentials for telnet seem to be
root/sti.admin5
JTAG-Serial Info
Serial
Serial Pinouts
<--- to SoC
J101
(GND) (RxD) [TxD]
to wireless module -->
Info derived from
| boot log |
|---|
Minimal POST completed... Success. Last reset cause: Hardware reset (Power-on reset) PSPBoot1.2 rev: 1.2.1.5 (c) Copyright 2002-2004 Texas Instruments, Inc. All Rights Reserved. Press ESC for monitor... 1 (psbl) Booting... Launching kernel decompressor. Starting LZMA Uncompression Algorithm. Copyright (C) 2003 Texas Instruments Incorporated; Copyright (C) 1999-2003 Igor Pavlov. Compressed file is LZMA format. Kernel decompressor was successful ... launching kernel. LINUX started... Config serial console: ttyS0,9600 CPU revision is: 00018448 Primary instruction cache 16kb, linesize 16 bytes (4 ways) Primary data cache 16kb, linesize 16 bytes (4 ways) Number of TLB entries 16. Linux version 2.4.17_mvl21-malta-mips_fp_le (paul@vserver3) (gcc version 2.95.3 20010315 (release/MontaVista)) #1 Wed Oct 5 13:27:47 CST 2005 Determined physical RAM map: memory: 14000000 @ 00000000 (reserved) memory: 00020000 @ 14000000 (ROM data) memory: 00fe0000 @ 14020000 (usable) On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: calculating r4koff... 000b71b0(750000) CPU frequency 150.00 MHz Calibrating delay loop... 149.91 BogoMIPS Freeing Adam2 reserved memory [0x14001000,0x0001f000] Memory: 14372k/16384k available (1494k kernel code, 2012k reserved, 103k data, 60k init) Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes) Inode-cache hash table entries: 1024 (order: 1, 8192 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 TI Optimizations: Allocating TI-Cached Memory Pool. Warning: Number of buffers is not configured.Setting default to 512 Using 512 Buffers for TI-Cached Memory Pool. DEBUG: Using Hybrid Mode. NSP Optimizations: Succesfully allocated TI-Cached Memory Pool. Initializing RT netlink socket Starting kswapd Disabling the Out Of Memory Killer devfs: v1.7 (20011216) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 pty: 32 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with no serial options enabled ttyS00 at 0xa8610e00 (irq = 15) is a 16550A ttyS01 at 0xa8610f00 (irq = 16) is a 16550A Vlynq CONFIG_MIPS_AVALANCHE_VLYNQ_PORTS=2 Vlynq Device vlynq0 registered with minor no 63 as misc device. Result=0 Vlynq instance:0 Link UP Vlynq Device vlynq1 registered with minor no 62 as misc device. Result=0 VLYNQ 1 : init failed block: 64 slots per queue, batch=16 Cpmac driver is allocating buffer memory at init time. Cpmac driver Disable TX complete interrupt setting threshold to 20. Default Asymmetric MTU for eth0 1500 PPP generic driver version 2.4.1 avalanche flash device: 0x400000 at 0x10000000. Amd/Fujitsu Extended Query Table v1.1 at 0x0040 number of CFI chips: 1 Looking for mtd device :mtd0: Found a mtd0 image (0xa1000), with size (0x35f000). Creating 1 MTD partitions on "Physically mapped flash:0": 0x000a1000-0x00400000 : "mtd0" mtd: partition "mtd0" doesn't start on an erase block boundary -- force read-only Looking for mtd device :mtd1: Found a mtd1 image (0x20090), with size (0x80f70). Creating 1 MTD partitions on "Physically mapped flash:0": 0x00020090-0x000a1000 : "mtd1" mtd: partition "mtd1" doesn't start on an erase block boundary -- force read-only Looking for mtd device :mtd2: Found a mtd2 image (0x0), with size (0x10000). Creating 1 MTD partitions on "Physically mapped flash:0": 0x00000000-0x00010000 : "mtd2" Looking for mtd device :mtd3: Found a mtd3 image (0x10000), with size (0x10000). Creating 1 MTD partitions on "Physically mapped flash:0": 0x00010000-0x00020000 : "mtd3" Looking for mtd device :mtd4: Found a mtd4 image (0x20000), with size (0x3e0000). Creating 1 MTD partitions on "Physically mapped flash:0": 0x00020000-0x00400000 : "mtd4" NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 1024) Linux IP multicast router 0.06 plus PIM-SM ip_conntrack version 2.0 (128 buckets, 1024 max) - 364 bytes per conntrack ip_tables: (c)2000 Netfilter core team netfilter PSD loaded - (c) astaro AG NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 Initializing the WAN Bridge. Please set the MAC Address for the WAN Bridge. Set the Environment variable 'wan_br_mac'. MAC Address should be in the following format: xx.xx.xx.xx.xx.xx VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k freed serial console detected. Disabling virtual terminals. console=/dev/tts/0 init started: BusyBox v0.61.pre (2005.10.05-05:30+0000) multi-call binary Starting pid 9, console /dev/tts/0: '/etc/init.d/rcS' Algorithmics/MIPS FPU Emulator v1.5 Reading Standard Configuration File /etc/led.conf Configured 15 states Using /lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/drivers/atm/tiatm.o registered device TI Avalanche SAR Texas Instruments ATM driver: version:[4.03.03.00] Waiting for enter to start '/bin/sh' (pid 31, terminal /dev/tts/0) Please press Enter to activate this console. SIOCGIFFLAGS: No such device SIOCGIFFLAGS: No such device SIOCGIFFLAGS: No such device Sep 8 12:00:14 cfgmgr(ap): AP is disabled Sep 8 12:00:14 cfgmgr(pppoe-106): Valid Configuration Tree PVC dB vpi = -1 vci = -1 in_use = 0 vpi = -1 vci = -1 in_use = 0 vpi = -1 vci = -1 in_use = 0 vpi = -1 vci = -1 in_use = 0 vpi = -1 vci = -1 in_use = 0 vpi = -1 vci = -1 in_use = 0 vpi = -1 vci = -1 in_use = 0 vpi = -1 vci = -1 in_use = 0 Doing BRCTL ... addbr br0 Doing BRCTL ... addbr br1 Doing BRCTL ... addbr br2 Sep 8 12:00:14 cfgmgr(snmpcm): snmpd starts (1) Sep 8 12:00:14 cfgmgr(sntp): NTP Polling Timer for DHCP Started succesfully. Sep 8 12:00:14 cfgmgr(sar): DSL Polling Timer Started succesfully. Sep 8 12:00:14 cfgmgr(fdb): Firewall NAT service started Default Asymmetric MTU for nas0 1500 Sep 8 12:00:16 IP: routing cache hash table of 512 buckets, 4Kbytes Sep 8 12:00:16 TCP: Hash tables configured (established 1024 bind 1024) Sep 8 12:00:16 : ip_conntrack version 2.0 (128 buckets, 1024 max) - 364 bytes per conntrack Sep 8 12:00:16 ip_tables: (c)2000 Netfilter core team Sep 8 12:00:16 : netfilter PSD loaded - (c) astaro AG Sep 8 12:00:16 : Initializing the WAN Bridge. Sep 8 12:00:16 : Please set the MAC Address for the WAN Bridge. Sep 8 12:00:16 : Set the Environment variable 'wan_br_mac'. Sep 8 12:00:16 MAC Address should be in the following format: xx.xx.xx.xx.xx.xx Sep 8 12:00:16 VFS: Mounted root (squashfs filesystem) readonly. Sep 8 12:00:16 : Mounted devfs on /dev Sep 8 12:00:16 Freeing unused kernel memory: 60k freed Sep 8 12:00:16 : Algorithmics/MIPS FPU Emulator v1.5 Sep 8 12:00:16 : registered device TI Avalanche SAR Sep 8 12:00:16 Texas Instruments ATM driver: version:[4.03.03.00] Sep 8 12:00:16 : Default Asymmetric MTU for nas0 1500 Sep 8 12:00:16 : Default Asymmetric MTU for br0 1500 Sep 8 12:00:16 cfgmgr(lanbridge0): Bridge Created: br0 Doing BRCTL ... setfilter br0 0 Doing BRCTL ... addif br0 eth0 Doing BRCTL ... addif br0 usb0 Sep 8 12:00:16 cfgmgr(lanbridge1): Bridge Created: br1 Doing BRCTL ... setfilter br1 0 Sep 8 12:00:17 cfgmgr(lanbridge2): Bridge Created: br2 Doing BRCTL ... setfilter br2 0 Doing BRCTL ... stp br0 off Sep 8 12:00:17 cfgmgr(lanbridge0): Bridge Interface Added: eth0 Doing BRCTL ... setfilter br0 0 Sep 8 12:00:18 cfgmgr(lanbridge0): Add Bridge Iface Error: 1 Doing BRCTL ... stp br1 off Doing BRCTL ... stp br2 off Sep 8 12:00:18 : Default Asymmetric MTU for br1 1500 Sep 8 12:00:18 : Default Asymmetric MTU for br2 1500 Sep 8 12:00:24 cfgmgr(sar): DSL Carrier is down |
cat /proc/version
# cat /proc/version Linux version 2.4.17_mvl21-malta-mips_fp_le (paul@vserver3) (gcc version 2.95.3 20010315 (release/MontaVista)) #1 Wed Oct 5 13:27:47 CST 2005
cat /proc/cpuinfo
# cat /proc/cpuinfo processor : 0 cpu model : MIPS 4KEc V4.8 BogoMIPS : 149.91 wait instruction : no microsecond timers : yes extra interrupt vector : yes hardware watchpoint : yes VCED exceptions : not available VCEI exceptions : not available
cat /proc/mtd
# cat /proc/mtd dev: size erasesize name mtd0: 0035f000 00010000 "mtd0" mtd1: 00080f70 00010000 "mtd1" mtd2: 00010000 00002000 "mtd2" mtd3: 00010000 00010000 "mtd3" mtd4: 003e0000 00010000 "mtd4"
ps aux
# ps aux
PID Uid VmSize Stat Command
1 root 1284 S init
2 root S [keventd]
3 root S [ksoftirqd_CPU0]
4 root S [kswapd]
5 root S [bdflush]
6 root S [kupdated]
7 root S [mtdblockd]
29 root 2804 S /usr/bin/cm_pc
31 root 1288 S -sh
32 root 1308 S /usr/sbin/thttpd -d /usr/www -u root -p 80 -c /cgi-b
33 root 3588 S /usr/bin/cm_logic -m /dev/ticfg -c /etc/config.xml
56 root 608 S /usr/bin/cm_klogd /dev/klog
57 root 700 S /sbin/dproxy -c /etc/resolv.conf -d
60 root 1668 S /usr/sbin/snmpd
144 root 688 S /usr/sbin/udhcpd /var/tmp/udhcpd.conf
200 root 628 S /sbin/utelnetd
201 root 1288 S -sh
202 root 1284 R ps aux
cat /proc/meminfo
# cat meminfo
total: used: free: shared: buffers: cached:
Mem: 14778368 9900032 4878336 0 1093632 3874816
Swap: 0 0 0
MemTotal: 14432 kB
MemFree: 4764 kB
MemShared: 0 kB
Buffers: 1068 kB
Cached: 3784 kB
SwapCached: 0 kB
Active: 2344 kB
Inactive: 3956 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 14432 kB
LowFree: 4764 kB
SwapTotal: 0 kB
SwapFree: 0 kB
cat /etc/*versions
# cat xaviversions 1.0.0T14_Rev14e.4.2_XW203ER-4 051103 BYS_localhost.localdomain # cat versions BUILD= VERSION=3.6.0A BOARD=AR7WRD FSSTAMP=20051005133124
other
| cat /etc/led.conf |
|---|
# cat led.conf
#################################################################
# Configuration File for AR7WRD board
##################################################################
##################################################################
# The GPIO numbers 0 to 31 ==> correspond to GPIO pins #########
# The GPIO numbers 32,33 are mapped to ADSL (LED) pins ###########
##################################################################
module = adsl # module = {adsl,usb,pppoe,wlan}
##################################################################
# Note: state 0 for adsl is dummy state and is present only for ##
# compatibility with the new LED driver ##
##################################################################
state = 0 # 0=dummy, 1=idle, 2=training, 3=sync, 4=activity
gpio = 33 # gpio number
mode = 0 # 0 = off,1 = on,2 = blinkoff,3 = blinkon, 4 = Flash
state = 1 # 0=dummy, 1=idle, 2=training, 3=sync, 4=activity
gpio = 33 # gpio number
mode = 0 # 0 = off,1 = on,2 = blinkoff,3 = blinkon, 4 = Flash
state = 2 # 0=dummy, 1=idle, 2=training, 3=sync, 4=activity
gpio = 33 # gpio number
mode = 4 # 0 = off,1 = on,2 = blinkoff,3 = blinkon, 4 = Flash
param1 = 200 # flash on duration in ms
param2 = 200 # flash off duration in ms
state = 3 # 0=dummy, 1=idle, 2=training, 3=sync, 4=activity
gpio = 33 # gpio number
mode = 1 # 0 = off,1 = on,2 = blinkoff,3 = blinkon, 4 = Flash
state = 4 # 0=dummy, 1=idle, 2=training, 3=sync, 4=activity
gpio = 32 # gpio number
mode = 2 # 0 = off,1 = on,2 = blinkoff,3 = blinkon, 4 = Flash
param1 = 100 # blink/flash rate in ms
######################################################################
module = cpmac # module = {adsl,usb,pppoe,wlan,cpmac}
state = 0 # 0 = link down, 1 = link up, 2 = pkt rcv, 3 = pkt xmit
gpio = 15 # gpio number
mode = 0 # 0 = off,1 = on,2 = blinkoff,3 = blinkon, 4 = Flash
state = 1 # 0 = link down, 1 = link up, 2 = pkt rcv, 3 = pkt xmit
gpio = 15 # gpio number
mode = 1 # 0 = off,1 = on,2 = blinkoff,3 = blinkon, 4 = Flash
state = 2 # 0 = link down, 1 = link up, 2 = pkt rcv, 3 = pkt xmit
gpio = 15 # gpio number
mode = 2 # 0 = off,1 = on,2 = blinkoff,3 = blinkon, 4 = Flash
param1 = 100 # blink/flash rate in ms
state = 3 # 0 = link down, 1 = link up, 2 = pkt rcv, 3 = pkt xmit
gpio = 15 # gpio number
mode = 2 # 0 = off,1 = on,2 = blinkoff,3 = blinkon, 4 = Flash
param1 = 100 # blink/flash rate in ms
#################################################
#module = usb # module = {adsl,usb,pppoe,wlan}
#state = 0 # 0 = link down, 1 = link up, 2 = pkt rcv, 3 = pkt xmit
#gpio = 12 # gpio number
#mode = 0 # 0 = off,1 = on,2 = blinkoff,3 = blinkon, 4 = Flash
#state = 1 # 0 = link down, 1 = link up, 2 = pkt rcv, 3 = pkt xmit
#gpio = 12 # gpio number
#mode = 1 # 0 = off,1 = on,2 = blinkoff,3 = blinkon, 4 = Flash
#state = 2 # 0 = link down, 1 = link up, 2 = pkt rcv, 3 = pkt xmit
#gpio = 12 # gpio number
#mode = 2 # 0 = off,1 = on,2 = blinkoff,3 = blinkon, 4 = Flash
#param1 = 100 # blink/flash rate in ms
#state = 3 # 0 = link down, 1 = link up, 2 = pkt rcv, 3 = pkt xmit
#gpio = 12 # gpio number
#mode = 2 # 0 = off,1 = on,2 = blinkoff,3 = blinkon, 4 = Flash
#param1 = 100 # blink/flash rate in ms
#####################################################################
module = pppoe # module = {adsl,usb,pppoe,wlan}
state = 0 # 0 = pppoe down, 1 = pppoe active
gpio = 13 # gpio number
mode = 0 # 0 = off,1 = on,2 = blinkoff,3 = blinkon, 4 = Flash
state = 1 # 0 = pppoe down, 1 = pppoe active
gpio = 13 # gpio number
mode = 1 # 0 = off,1 = on,2 = blinkoff,3 = blinkon, 4 = Flash
######################################################################
module = wlan # module = {adsl,usb,pppoe,wlan}
state = 0 # 0 = link down, 1 = link up
gpio = 6 # gpio number
mode = 0 # 0 = off,1 = on,2 = blinkoff,3 = blinkon, 4 = Flash
state = 1 # 0 = link down, 1 = link up
gpio = 6 # gpio number
mode = 1 # 0 = off,1 = on,2 = blinkoff,3 = blinkon, 4 = Flash
state = 2 # 0 = link down, 1 = link up, 2 = pkt rcv, 3 = pkt xmit
gpio = 6 # gpio number
mode = 2 # 0 = off,1 = on,2 = blinkoff,3 = blinkon, 4 = Flash
param1 = 100 # blink/flash rate in ms
state = 3 # 0 = link down, 1 = link up, 2 = pkt rcv, 3 = pkt xmit
gpio = 6 # gpio number
mode = 2 # 0 = off,1 = on,2 = blinkoff,3 = blinkon, 4 = Flash
param1 = 100 # blink/flash rate in ms
|
nmap 192.168.5.1 -p 1-65535
# nmap 192.168.5.1 -p 1-65535 Starting Nmap 6.40 ( http://nmap.org ) at 2014-04-06 22:03 EDT Nmap scan report for mygateway1.ar7 (192.168.5.1) Host is up (0.0050s latency). Not shown: 65531 closed ports PORT STATE SERVICE 21/tcp open ftp 22/tcp open ssh 23/tcp open telnet 80/tcp open http MAC Address: 00:01:38:50:8D:BA (XAVi Technologies) Nmap done: 1 IP address (1 host up) scanned in 32.59 seconds
Pictures
angled shot
bottom and label
back
board top
board bottom
CPU, RAM, and Flash closeup
Categories:
- DQ Technology
- Embedded system/wireless router
- Embedded system/dsl modem
- Embedded System Texas Instruments
- Embedded System TNETD7300A
- Texas Instruments
- Embedded System MIPS 4KEc
- Embedded System
- Embedded System Marvell
- Embedded System 88E6060
- Marvell
- Manuf XAVi
- Embedded System TNETW1130
- Embedded System Radia
- Embedded System RC2422B
- Radia
- Embedded System IEEE 802.11b/g
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation
