D-Link DWL-700AP rev A2

multiple revisions of this device, use caution

b (B11)
Air 2.4 GHz Wireless Access Point
Support	Support page
Wikipedia	D-Link
WikiDevi.wi-cat.ru	D-Link DWL-700AP rev A2
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	D-Link DWL-700AP A2
FCC ID	KA2DWL700AP-A2
Type	access point
CPU1	ADMtek ADM8628
CPU1 Type	ARM7 (TDMI)
CPU1 Speed	75 MHz
Flash1 Chip	SST 39VF160-90-4C-EK
Flash1 Size	2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br />
RAM1 Size	8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Chip	EtronTech EM638325TS-6
ETH chip1	ADMtek ADM8628
Ethernet Port Count	1-LAN
802dot11 OUI: none specified
Expansion IF types	none specified
Power	5 VDC, 2 A
Connector type	barrel
Flags: schematics
Other
Default SSID: default (101 addl. devices) Default IP address: 192.168.0.50 the IP 192.168.0.50 is used by 62 additional devices of which 62 are D-Link devices Default login user: admin Default login password: blank admin:blank credentials used by 367 additional devices of which 192 are D-Link devices
Manuf/OEM/ODM	PESI WA254D
Retail
FCC approval date	24 November 2003
Radio 1
Chip1	ADMtek ADM8628
Chip2	RFMD RF3000
Chip3	RFMD RF2958
Wireless interface OUI	none specified
Antenna Connector Type	RP-SMA
Wireless Standard	IEEE 802.11b
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
CPU1 brand Radio1 chip1 brand Radio1 chip2 brand D-Link DWL-700AP rev A1 ADMtek ADMtek RFMD D-Link DWL-700AP rev A2 ADMtek ADMtek RFMD D-Link DWL-700AP rev B1 Realtek Realtek

For a list of all currently documented ADMtek chipsets with specifications, see ADMtek.
For a list of all currently documented RFMD (Qorvo) chipsets with specifications, see RFMD.

For a list of all currently documented D-Link device with specifications, see D-Link.

• 11 Mbps - 2.4GHz 802.11b = B11 class

Overview

"WA254D-05-A" and "41713-82902-05" is silkscreened on the board in the FCC photos.

Default settings are per the FCC manual.