Cudy AP3000 Outdoor v1
From TechInfoDepot
Jump to navigationJump to searchabgn+ac+ax (AX3000) | |
|---|---|
| AX3000 2.5G Wi-Fi 6 Access Point | |
 | |
| Homepage | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Cudy AP3000 Outdoor v1 |
| FCC ID |
none specified |
| Type |
access point |
| CPU1 |
MediaTek MT7981BA |
| CPU1 Type |
ARM Cortex-A53 (Filogic 820) |
| CPU1 Speed |
1.3 GHz ( 2 cores ) 64-bit |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND) |
| RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 |
MediaTek MT7981BA |
| Ethernet Port Count |
1-1GbE-LAN |
| Wired Standard |
IEEE 802.3i/3u/3ab |
|
802dot11 OUI: none specified | |
| Stock bootloader |
U-Boot |
| Expansion IF types |
none specified |
| PoE |
802.3at, standard |
| Power |
48 ~ 57"~57" can not be assigned to a declared number type with value 48. VDC, ? A |
| Connector type |
PoE |
| Other | |
|
| |
| 3rd Party Firmware Support | |
| Radio 1 | |
| Chip1 |
MediaTek MT7981BA |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n/ax |
| 802.11ax |
up to 574 Mbps |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
| Radio 2 | |
| Chip1 |
MediaTek MT7981BA |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11a/n/ac/ax |
| AX-QAM |
up to 2402 Mbps |
| 802.11ax |
up to 1201 Mbps |
| 802.11ac |
up to 867 Mbps |
| 802.11n |
up to 300 Mbps |
| 802.11a |
up to 54 Mbps |
| WiFi Operating Frequency |
5 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Cudy device with specifications, see Cudy.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: mediatek
OpenWrt Subtarget: filogic
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: ?
Current supported version: snapshot
OpenWrt Target: mediatek
OpenWrt Subtarget: filogic
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: ?
Current supported version: snapshot
Please insert instructions here
Categories:
- Cudy
- Embedded system/access point
- Embedded System MediaTek
- Embedded System MT7981BA
- MediaTek
- Embedded System ARM
- Embedded System Cortex-A53 (''Filogic 820'')
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n/ax
- Embedded System IEEE 802.11a/n/ac/ax
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation
