Comtrend AR-5389
bgn (N150) | |||||||
|---|---|---|---|---|---|---|---|
| Wireless ADSL2+ Router | |||||||
| WikiDevi.wi-cat.ru | |||||||
| 3rd Party Firmware | |||||||
| dd-wrt |
Status Unknown | ||||||
| OpenWrt |
Status Unknown | ||||||
| Tomato any flavor |
Status Unknown | ||||||
| Platform | |||||||
| Brand • Model • Rev |
Comtrend AR-5389 | ||||||
| FCC ID | |||||||
| Type |
wireless router, dsl modem | ||||||
| CPU1 |
Broadcom Model? | ||||||
| Flash1 Chip |
Brand? Model? | ||||||
| Flash1 Size |
? MiB | ||||||
| RAM1 Size |
? MiB | ||||||
| RAM1 Chip |
ProMOS Model? | ||||||
| ETH chip1 |
Broadcom Model? | ||||||
| Switch |
Broadcom Model? | ||||||
| Ethernet Port Count |
4-100MbE-LAN | ||||||
| Wired Standard |
IEEE 802.3i/3u | ||||||
|
802dot11 OUI: none specified | |||||||
| Expansion IF types |
none specified | ||||||
| Power |
12 VDC, 0.5 A | ||||||
| Connector type |
barrel | ||||||
|
Flags: ADSL2+ | |||||||
| Other | |||||||
|
Default IP address: 192.168.1.1 | |||||||
| Manuf/OEM/ODM | |||||||
| Retail | |||||||
| FCC approval date | 23 May 2013 | ||||||
| Country of manuf | China | ||||||
| Radio 1 | |||||||
| Chip1 |
Broadcom BCM4313 | ||||||
| Wireless interface OUI |
none specified | ||||||
| Antenna Connector Type |
none specified | ||||||
| MIMO status |
1x1:1 | ||||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||||
| 802.11n |
up to 150 Mbps | ||||||
| 802.11g |
up to 54 Mbps | ||||||
| 802.11b |
up to 11 Mbps | ||||||
| WiFi Operating Frequency |
2.4 GHz | ||||||
| |||||||
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Comtrend device with specifications, see Comtrend.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
FCC ID L9VAR-5389 redirects (CoI) to KA2DSL-2640U.
"PWB:T0047805C-G" and "DAT:"<10? covered by a label>".08.18" is silkscreened on the board in the FCC photos.
- The FCC sample label seems to indicate the internal DareGlobal model for the device is TA04G-N2GDM-HA01.
The SoC is covered by a heatsink in the FCC photos, but it is presumed to be a Broadcom chip. The Wi-Fi radio is shown as using a Skyworks (SiGe) SE2603L / 2603L 802.11b/g/n WLAN Front End Module.
Default settings are per the FCC manual. They may be inaccurate.
- The sample SSID in the manual is Comtrend8C61 (ComtrendXXXX pattern).
FCC Reg. No.: US: 5SYDL01BAR-5389
