Compex WPJ342
From TechInfoDepot
Jump to navigationJump to searchan (AN300) | |
|---|---|
| 5GHz 2×2 Wireless Embedded Board with MiniPCI-e Slot | |
| Homepage | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Compex WPJ342LV |
| FCC ID | |
| Type |
wireless embedded board |
| CPU1 |
Atheros AR9342 |
| CPU1 Type |
MIPS 74Kc |
| CPU1 Speed |
560 MHz |
| Flash1 Chip |
Macronix MX25L6405D |
| Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
Winbond W9751G6KB-25 |
| ETH chip1 |
Atheros AR9342 |
| ETH chip2 |
Atheros AR8236 |
| Ethernet Port Count |
2-100MbE-LAN |
| Wired Standard |
IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Stock bootloader |
U-Boot |
| Stock FW OS |
Linux CompexWRT |
| Expansion IF types |
Mini PCIe |
| Mini PCIe slots |
1 |
| PoE |
802.3af, standard |
| Power |
12-24 VDC, ? A |
| Connector type |
barrel |
| Serial Port (UART) |
yes, 4-pin header |
| JTAG Port |
yes, 14-pin header |
| Other | |
|
| |
| Manuf/OEM/ODM | |
| 3rd Party Firmware Support | |
| Retail | |
| Availability | End of Life |
| FCC approval date | 01 September 2014 |
| Country of manuf | China |
| Radio 1 | |
| Chip1 |
Atheros AR9342 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
U.FL |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11a/n |
| 802.11n |
up to 300 Mbps |
| 802.11a |
up to 54 Mbps |
| WiFi Operating Frequency |
5 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Compex device with specifications, see Compex.
Overview
Per Compex's datasheet...
- "C-432JPW 7A03" is silkscreened on the board shown
- It seems to be indicated that there are (or will be) two item codes for the device..
- one for a low voltage (12-24V PoE) and one for a high voltage model (36-48V PoE)
- DC jack input is noted as 12-24V for both boards
- CompexWRT is noted as the stock OS - it seems to be derived from OpenWrt
- OpenWrt is (or will be, if not now) supported on these boards
Links of Interest
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
Support started version: 17.01.0
Current supported version: 19.07.10
On the OpenWrt Wiki
Support started version: 17.01.0
Current supported version: 19.07.10
Please insert instructions here
See also
- Compex MML342 - PPage
- Compex MMJ342 - PPage
- Compex MMJ342 Plus - PPage
- Compex WPJ344 - TK4WPJ344 (08/22/2014) PPage
- Compex WPJ531 - TK4WPJ531 (07/24/2015) PPage
Categories:
- Compex
- Embedded system/wireless embedded board
- Embedded System Atheros
- Embedded System AR9342
- Atheros
- Embedded System MIPS 74Kc
- Embedded System
- Embedded System AR8236
- Manuf Compex
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11a/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation
