Cisco Meraki MX65W
From TechInfoDepot
Jump to navigationJump to searchabgn+ac | |
|---|---|
| wireless router | |
| Wikipedia | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Status Unknown |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Cisco Meraki MX65W |
| FCC ID |
none specified |
| Type |
wireless router |
| CPU1 |
Broadcom BCM58625 |
| CPU1 Type |
ARM Cortex-A9 |
| CPU1 Speed |
1.2 GHz ( 2 cores ) |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (NAND) |
| RAM1 Size |
2 GiB 2,048 MiB <br />2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br /> |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 |
Broadcom BCM58625 |
| ETH chip2 |
Qualcomm Atheros QCA8337 |
| ETH chip3 |
Qualcomm Atheros QCA8337 |
| Switch |
Broadcom BCM58625 |
| Ethernet Port Count |
2-1GbE-WAN 10-1GbE-LAN |
| Wired Standard |
IEEE 802.3i/3u/3ab |
|
802dot11 OUI: none specified | |
| Stock bootloader |
U-Boot |
| Expansion IF types |
USB 2.0 |
| USB ports |
1 |
| USB Hub Compatible |
Untested |
| Power |
? VAC ~ ? Hz, ? A |
| Serial Port (UART) |
yes, 3.3, 115200 / 8N1 |
| Other | |
|
| |
| 3rd Party Firmware Support | |
| Radio 1 | |
| Chip1 |
Brand? Model? |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| Wireless Standard |
IEEE 802.11b/g/n |
| WiFi Operating Frequency |
2.4 GHz |
| Radio 2 | |
| Chip1 |
Brand? Model? |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| Wireless Standard |
IEEE 802.11a/n/ac |
| WiFi Operating Frequency |
5 GHz |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented Cisco device with specifications, see Cisco.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: bcm53xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_cortex-a9
Support started version: ?
Current supported version: snapshot
Unsupported Functions:
wireless; PoE PSE
Comment:
Single CPU port shared between WAN, LAN ports. No direct switching between two QCA switches at this time, routed through CPU per comment on forum.
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: bcm53xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_cortex-a9
Support started version: ?
Current supported version: snapshot
Unsupported Functions:
wireless; PoE PSE
Comment:
Single CPU port shared between WAN, LAN ports. No direct switching between two QCA switches at this time, routed through CPU per comment on forum.
PoE PSE support is being worked on, there is stuff on github, check the forum
Please insert instructions here
Categories:
- Cisco
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM58625
- Broadcom
- Embedded System ARM
- Embedded System Cortex-A9
- Embedded System QCA8337
- Embedded System Qualcomm Atheros
- Qualcomm Atheros
- OpenWrt Supported
- Embedded System IEEE 802.11b/g/n
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation
