CC&C WL-1502

multiple revisions of this device, use caution

b (B11)
WLAN Broadband Router
WikiDevi.wi-cat.ru	CC&C WL-1502
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	CC&C WL-1502
FCC ID	PANWL1502
Type	wireless router
CPU1	Realtek RTL8181
CPU1 Type	Lexra LX5280
CPU1 Speed	not specified
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Chip	ISSI IS42S16400A-7T x 2
ETH chip1	Realtek RTL8181
Switch	Realtek RTL8305SB
Ethernet Port Count	1-WAN 4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	none specified
Power	7.5 VDC, ? A
Connector type	barrel
Serial Port (UART)	yes, DE-9
Retail
FCC approval date	24 September 2003
Radio 1
Chip1	Realtek RTL8181
Chip2	Philips SA2400A
Wireless interface OUI	none specified
Antenna Connector Type	none specified
Wireless Standard	IEEE 802.11b
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
FCC ID CC&C WL-1502 PANWL1502

For a list of all currently documented Philips chipsets with specifications, see Philips.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented CC&C device with specifications, see CC&C.

• 11 Mbps - 2.4GHz 802.11b = B11 class

Overview

"10-015101-0C" appears to be silkscreened on the board in the FCC photos.

On the OpenWrt forums

This post states that a device with this FCC ID used an AMD AM29LV320DB-90EI (4MB) Flash chip and 2x ISSI IS42S16400A-7T (16MB total) RAM chips.

The voltage used was noted as 7.5V (the FCC filings indicate 9V).

Probable 00:02:72 OUI.