Blitzz BWA711 v1 (??)/Serial info

Info derived from

boot log

00111002 Copyright (c) 2003 Xavi Corporation Switch chip detected : 1010 Chip select 0, Flash chip MXIC CFI-160 bottom, address 0xbfc00000, size 2MBytes flash not detected in chip select 1 CPU type BRECIS 1000. CPU clock frequency 167 MHz. Avail RAM 16025 KBytes. PMON version 6.8.631 [EB], Tue Feb 3 17:27:32 CST 2004 IP Address : 192.168.1.1 MAC Address : 00:01:38:37:36:16 *** Press ^C to abort auto run (3 seconds) *** Auto run second count down: 0 found image at 0xbfc20000, length 0x1b348d Inflating image at bfc20000 to 80100000 block 69 Total blocks 69 original crc 0x850d0451 and length 0x306800 UART clock set to 1843200 LINUX started... Set PCI Clock Clock rate set to 166666667 CPU revision is: 0001830a Primary instruction cache 16kb, linesize 16 bytes (4 ways) Primary data cache 16kb, linesize 16 bytes (4 ways) Linux version 2.4.20-br251 (mel@V_Server1) (gcc version 3.2 20030120 (uClinux 2.4.19-br20 BRECIS Release 2.0)) #3 Fri Jul 30 17:40:15 CST 2004 Determined physical RAM map: memory: 00001000 @ 00000000 (reserved) memory: 000ff000 @ 00001000 (ROM data) memory: 00338000 @ 00100000 (reserved) memory: 00bae700 @ 00438000 (usable) On node 0 totalpages: 4070 zone(0): 4070 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: ip=::::XGATE:eth0:none:100fs console=ttyS0,57600 calculating r4koff... 000cb735(833333) CPU frequency 166.66 MHz Calibrating delay loop... 166.29 BogoMIPS Memory: 11776k/11960k available (1571k kernel code, 184k reserved, 71k data, 84k init) Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) Inode cache hash table entries: 1024 (order: 1, 8192 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) POSIX conformance testing by UNIFIX pcibios_init: assign resources, Autoconfig PCI channel 0x802b34c8 Scanning bus 00, I/O 0x00000004:0x00001000, Mem 0xb9002000:0xbc000000 00:0e.0 Class 0200: 168c:0013 (rev 01) Mem at 0xb9010000 [size=0x10000] scan the buses. Scanning bus 00 Found 00:70 [168c/0013] 000200 00 Fixups for bus 00 Bus scan for 00 returning with max=00 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0xbc000100 (irq = 19) is a 16550A ttyS01 at 0xb8400030 (irq = 13) is a 16550A brecisboard: brecis_board_init entry brecismspeth.c:v1.97, Sep 8, 2003 BRECIS Communications, Corp., www.brecis.com ethaddr1 not set in boot prom No Mac addr specified for eth1 ethaddr1 ethaddr1 not set in boot prom No Mac addr specified for eth1 ethaddr1 Blkmem copyright 1998,1999 D. Jeff Dionne Blkmem copyright 1998 Kenneth Albanowski Blkmem 1 disk images: 0: 802B4000-804067FF [VIRTUAL A02B4000-A04067FF] (RO) RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize gbt_ar5k: gbt_atheros_init, Atheros AR5K 802.11a PCI/CardBus WLAN registering pci device. PCI: Setting latency timer of device 00:0e.0 to 128 gbt_ar5k: AR5K deviceID = 0013 found. gbt_ar5k: The GBT_ATHEROS CardBus Ethernet interface was not assigned an IRQ. Maybe it will not be activated. gbt_ar5k: ATTENTION, AP start up without file system supported! H/W_probe Set wlan0 radio frequency 0 rxQueue phy addr : 00F44000 PPP generic driver version 2.4.2 Copy engine driver installed b_flash flash device: bfc00000 at 200000 Amd/Fujitsu Extended Query Table v1.0 at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling fast programming due to code brokenness. Creating 3 MTD partitions on "flash0": 0x00000000-0x00020000 : "pmon" 0x00020000-0x001f0000 : "linux image" 0x001f0000-0x00200000 : "nvram data storage" NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 512 bind 512) eth0: Switch is set for 100 Mbps Full Duplex Reading Configuration File "/var/apcfg". Cannot open /var/apcfg Can't parse configuration file. Using factory default settings. gbt_ar5k: ar5k module starts wlan0. gbt_ar5k: ar5k module multiDomainCapEnabled FALSE gbt_ar5k: swRadioDisable = 0, calibrationTime = 30 gbt_ar5k: wlan0 athCalibrationTask gbt_ar5k: tApHouseKeeping alive. gbt_ar5k: tApListKeeping alive. gbt_ar5k: 802.1x built gbt_ar5k: wlan0 pdevInfo @ 0x80f60000 BSS start wireless access point starting... wlan0 Ready Ready IP-Config: Incomplete network configuration information. ip_conntrack version 2.1 (127 buckets, 1016 max) - 352 bytes per conntrack ip_ct_ftp help registering helper callback=8023c034 ip_ct_irc help registering helper callback=8023c6f8 register h225 conntrack module ip_ct_h323 help registering helper callback=8023e83c register h225 nat help module ip_ct_tftp help registering helper callback=0 ip_ct_quake3 help registering helper callback=8023feb0 ip_ct_pptp help registering helper callback=802401c8 ip_ct_mms help registering helper callback=80240ac8 ip_tables: (C) 2000-2002 Netfilter core team ipt_timer loading URLBLK init ipt_inbox loading NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (romfs filesystem) readonly. Freeing prom memory: 1020kb freed Freeing unused kernel memory: 84k freed [8028c000-802a1000] Algorithmics/MIPS FPU Emulator v1.5 Starting /etc/rc Mount ramdisk as /var Mount /proc Create /var/tmp/ Create /var/run/utmp Enabling IP forwarding # nvram_retrieve_vars: magic number error eth0: Switch is set for 100 Mbps Full Duplex Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config Added VLAN with VID == 1 to IF -:eth0:- WARNING: VLAN 1 does not work with many switches, consider another number if you have problems. Added VLAN with VID == 2 to IF -:eth0:- eth0.1: dev_set_promiscuity(master, 1) device eth0 entered promiscuous mode device eth0.1 entered promiscuous mode br0: port 1(eth0.1) entering learning state br0: port 1(eth0.1) entering forwarding state br0: topology change detected, propagating device wlan0 entered promiscuous mode Reading Configuration File "/var/apcfg". gbt_ar5k: ar5k module starts wlan0. gbt_ar5k: ar5k module multiDomainCapEnabled TRUE gbt_ar5k: swRadioDisable = 0, calibrationTime = 30 gbt_ar5k: wlan0 athCalibrationTask gbt_ar5k: tApHouseKeeping alive. gbt_ar5k: tApListKeeping alive. gbt_ar5k: 802.1x built gbt_ar5k: wlan0 pdevInfo @ 0x80f60000 BSS start wireless access point starting... wlan0 Ready Ready br0: port 2(wlan0) entering learning state br0: port 2(wlan0) entering forwarding state br0: topology change detected, propagating Firewall Initializing... Firewall Setup... Virtual Server Initializing... Access Control List Initializing... Content Filter Initializing... Hex:0x1 Hex:0x0 Hex:0x0 Hex:0x0 Syslog Initializing... close Remote Log plog->slog_pid=153 xsyslogd started. close Remote Log eth0.2: Setting MAC address to 00 01 38 37 36 17.

bootloader help

XGATE> ?
  load  load memory from hostport            h  The help command
  help  The help command                     ?  The help command
  copy  copy memory                          g  start execution (go)
   sym  define symbol                      set  display/set variable
     d  display memory                  setmac  The setmac command
getmac  The getmac command               setbd  The setbd command
  dump  send srecs/binary to hostport     ping  send ping request to hostport

cat /proc/cpuinfo

# cat /proc/cpuinfo
BRECIS MIPS 4km

cat /proc/meminfo

# cat /proc/meminfo
        total:    used:    free:  shared: buffers:  cached:
Mem:  12144640  7360512  4784128        0   630784   643072
Swap:        0        0        0
MemTotal:        11860 kB
MemFree:          4672 kB
MemShared:           0 kB
Buffers:           616 kB
Cached:            628 kB
SwapCached:          0 kB
Active:            936 kB
Inactive:          308 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:        11860 kB
LowFree:          4672 kB
SwapTotal:           0 kB
SwapFree:            0 kB

cat /proc/mtd

# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00020000 00010000 "pmon"
mtd1: 001d0000 00010000 "linux image"
mtd2: 00010000 00010000 "nvram data storage"

cat /etc/passwd

# cat passwd
root:z1UcRYmEzsAaY:0:0:root:/root:/bin/sh
demo:z1UcRYmEzsAaY:5000:100:Demo User:/home/demo:/bin/bash

ps

# ps
  PID  Uid     VmSize Stat Command
    1 root            S    init
    2 root            S    [keventd]
    3 root            R    [ksoftirqd_CPU0]
    4 root            S    [kswapd]
    5 root            S    [bdflush]
    6 root            S    [kupdated]
    7 root            S    [mtdblockd]
    8 root            Z    [tTrapMon]
    9 root            Z    [tWlanCal]
   10 root            Z    [tApHouseKeeping]
   11 root            Z    [swapper]
   33 root            S    /bin/webs
   34 root            S    -/bin/sh
   66 root            S    [tWlanCal]
   67 root            S    [tApHouseKeeping]
   68 root            S    [tApListKeeping]
  154 root            S    syslogd -f /var/run/logmail.conf
  172 root            S    udhcpd
  184 root            R    ps

cat /proc/bus/pci/devices

# cat devices
0070    168c0013        0       b9010000        00000000        00000000        00000000        00000000        00000000        00000000        00010000  00000000 00000000        00000000        00000000        00000000        00000000        atheros