Belkin F9K1009 v1

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
bgn (N150)
Wireless N150 Router
Belkin F9K1009.jpg
Wikipedia
InfoDepot Wiki
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
Belkin F9K1009 v1
FCC ID
Board ID
AP699E9NL
Type
wireless router
CPU1
Realtek Model?
Flash1 Chip
Brand? Model?
Flash1 Size
? MiB
RAM1 Size
? MiB
RAM1 Chip
Brand? Model?
ETH chip1
Realtek Model?
Switch
Realtek Model?
Ethernet Port Count
1-100MbE-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: 08:86:3B (10 E, 14 W)
Ethernet OUI: 08:86:3B (10 E, 14 W)

Expansion IF types
none specified
Power
12 VDC, 0.5 A
Connector type
barrel
Serial Port (UART)
yes, internal, 4-pin header, 3.3V TTL
JTAG Port
probably
Other

Default SSID: belkin.XXX (19 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 297 additional devices
of which 99 are Belkin devices

Manuf/OEM/ODM
Retail
Availability End of Life
FCC approval date 16 April 2014
Country of manuf China
Radio 1
Chip1
Realtek RTL8188RE
Wireless interface OUI
08:86:3B
Antenna Connector Type
none
MIMO status
1x1:1
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 150 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
Belkin F9K1009 v1RealtekRealtek
Belkin F9K1009 v2RealtekRealtek

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented Belkin device with specifications, see Belkin.

150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

"AP699E9NL"<......>" and "REV"<..>"1.0" kind of looks like it's silkscreened on the board in the FCC photos. .. but the photo quality is terrible.

Default settings are per the FCC manual + sample label.

The OUI used (08:86:3B) is per the sample label. The SSID format would seem to be belkin.XXX, but the pattern of the last 3 characters is not known.

Probable included PSU(s)

The power supply shown in the FCC photos is a Shenzhen Gongjin Electronics S05A12-120A050-P4.

Shenzhen Gongjin Electronics S05A12-120A050-P4 (more)
Input: 100-240 VAC ~ 50/60 Hz, 0.3 A
 Input connector: NEMA 1-15P
Style: medium, horiz.  Eff. level: 5
Output: 12 VDC, 0.5 A
 Output connector: barrel (center +)
 OD: ??  ID: ??  LEN: ??