Belkin F5D8235-4 v3
bgn (N300) | |||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
N+ Wireless Router | |||||||||||||||||||||
Support | |||||||||||||||||||||
Wikipedia | |||||||||||||||||||||
InfoDepot Wiki | |||||||||||||||||||||
WikiDevi.wi-cat.ru | |||||||||||||||||||||
3rd Party Firmware | |||||||||||||||||||||
dd-wrt | |||||||||||||||||||||
OpenWrt |
Status Unknown | ||||||||||||||||||||
Tomato any flavor | |||||||||||||||||||||
Gargoyle |
Status Unknown | ||||||||||||||||||||
Platform | |||||||||||||||||||||
Brand • Model • Rev |
Belkin F5D8235-4 v3 | ||||||||||||||||||||
FCC ID | |||||||||||||||||||||
IC ID | |||||||||||||||||||||
Board ID |
141711620000J | ||||||||||||||||||||
Type |
wireless router | ||||||||||||||||||||
CPU1 |
Broadcom BCM4718A1 | ||||||||||||||||||||
CPU1 Type |
MIPS 74Kc | ||||||||||||||||||||
CPU1 Speed |
480 MHz | ||||||||||||||||||||
Flash1 Chip |
Eon EN29LV640B-90TIP | ||||||||||||||||||||
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Parallel, 8 bit) | ||||||||||||||||||||
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> | ||||||||||||||||||||
RAM1 Chip |
EtronTech EM68B16CWPA-25H | ||||||||||||||||||||
ETH chip1 |
Broadcom BCM4718A1 | ||||||||||||||||||||
Switch |
Broadcom BCM53115 | ||||||||||||||||||||
Ethernet Port Count |
1-100MbE-WAN 4-1GbE-LAN | ||||||||||||||||||||
Wired Standard |
IEEE 802.3i/3u | ||||||||||||||||||||
Stock bootloader |
CFE | ||||||||||||||||||||
Stock FW OS |
Linux 2.6.22 | ||||||||||||||||||||
Expansion IF types |
USB 2.0 | ||||||||||||||||||||
USB ports |
1 | ||||||||||||||||||||
USB Hub Compatible |
Untested | ||||||||||||||||||||
Power |
15 VDC, 1.25 A | ||||||||||||||||||||
Connector type |
barrel | ||||||||||||||||||||
Serial Port (UART) |
yes, 3.3V TTL, 4-pin header, (115200 8N1), J3 | ||||||||||||||||||||
JTAG Port |
yes, 14-pin header, unpopulated, J2 | ||||||||||||||||||||
Additional chips | |||||||||||||||||||||
Other | |||||||||||||||||||||
Default SSID: Belkin_N+_XXXXXX (3 addl. devices) | |||||||||||||||||||||
Manuf/OEM/ODM |
Arcadyan WG7116 F22-LF-AK | ||||||||||||||||||||
3rd Party Firmware Support | |||||||||||||||||||||
Retail | |||||||||||||||||||||
FCC approval date | 28 August 2009 | ||||||||||||||||||||
ASIN |
B001CEYYFK , multiple uses | ||||||||||||||||||||
Country of manuf | China | ||||||||||||||||||||
Radio 1 | |||||||||||||||||||||
Chip1 |
Broadcom BCM4718A1 | ||||||||||||||||||||
Wireless interface OUI |
00:22:75 | ||||||||||||||||||||
Antenna Connector Type |
soldered | ||||||||||||||||||||
MIMO status |
2x2:2 | ||||||||||||||||||||
Wireless Standard |
IEEE 802.11b/g/n | ||||||||||||||||||||
802.11n |
up to 300 Mbps | ||||||||||||||||||||
802.11g |
up to 54 Mbps | ||||||||||||||||||||
802.11b |
up to 11 Mbps | ||||||||||||||||||||
WiFi Operating Frequency |
2.4 GHz | ||||||||||||||||||||
Radio cor_rev |
17 | ||||||||||||||||||||
|
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Belkin device with specifications, see Belkin.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
"P/N: 141711620000J REV: 01A" is silkscreened on the board used to fill this entry. The board is essentially the same as the one used for the Belkin F6D6230-4. Obviously, the 5GHz radio is unpopulated on this model. RAM on this model may vary. This particular one had a EtronTech EM68B16CWPA-25H RAM (64MB) chip.
The power adapter included with this model is probably a Foxlink FA-1501250SUA (100-240VAC ~ 50/60Hz, 0.5A -> 15VDC, 1.25A).
Links of Interest
- Belkin F5D8235-4 v3 On the DD-WRT Forum
- On the TomatoUSB forum
- Belkin F5D8235 v3.0 Clarification
- f5d8235-4 v3
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
Supported by dd-wrt as of 2012 = See http://www.dd-wrt.com/phpBB2/viewtopic.php?p=668136
Please insert instructions here
Flashing Tomato
Please insert instructions here
Serial
# dmesg • >> |
---|
Linux version 2.6.22 (lichen@fedora10) (gcc version 4.1.2) #1 Fri Nov 6 11:11:05 CST 2009 CPU revision is: 00019740 Found chip type AI (0x19a14716) Chipc: rev 31, caps 0x184807c9, chipst 0x9800 pmurev 5, pmucaps 0x11242c05 No PLL init done for chip 4716 rev 1 pmurev 5 si_kattach done. ccrev = 31, wd_msticks = 32 Determined physical RAM map: memory: 02000000 @ 00000000 (usable) On node 0 totalpages: 8192 Normal zone: 64 pages used for memmap Normal zone: 0 pages reserved Normal zone: 8128 pages, LIFO batch:0 Built 1 zonelists. Total pages: 8128 Kernel command line: root=/dev/mtdblock2 console=ttyS0,115200 init=/sbin/preinit Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, linesize 32 bytes. Synthesized TLB refill handler (20 instructions). Synthesized TLB load handler fastpath (32 instructions). Synthesized TLB store handler fastpath (32 instructions). Synthesized TLB modify handler fastpath (31 instructions). PID hash table entries: 128 (order: 7, 512 bytes) CPU: BCM4716 rev 1 at 453 MHz Using 226.500 MHz high precision timer. Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory: 28240k/32768k available (2810k kernel code, 4528k reserved, 1121k data, 132k init, 0k highmem) Calibrating delay loop... 225.28 BogoMIPS (lpj=112640) Mount-cache hash table entries: 512 NET: Registered protocol family 16 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using membase 8000000 PCI: Initializing host PCI: Reset RC PCI: Fixing up bus 0 PCI: Fixing up bridge PCI: Setting latency timer of device 0000:01:00.0 to 64 PCI: Fixing up bridge PCI: Setting latency timer of device 0000:01:00.1 to 64 PCI: Enabling device 0000:01:00.1 (0004 -> 0006) PCI: Fixing up bus 1 Time: MIPS clocksource has been installed. NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered gpio_init 466 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher fuse init (API version 7.8) io scheduler noop registered (default) Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A loop: module loaded PPP generic driver version 2.4.2 PPP MPPE Compression module registered NET: Registered protocol family 24 Physically mapped flash: Found 1 x16 devices at 0x0 in 8-bit bank Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 Amd/Fujitsu Extended Query Table at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Flash device: 0x800000 at 0x1c000000 Physically mapped flash: squash filesystem with lzma found at block 2037 Creating 4 MTD partitions on "Physically mapped flash": 0x00000000-0x00030000 : "boot" 0x00030000-0x007f0000 : "linux" 0x001fd590-0x007f0000 : "rootfs" 0x007f0000-0x00800000 : "nvram" Found a 0MB serial flash sflash: found no supported devices usbmon: debugfs is not available GACT probability on Mirror/redirect action on u32 classifier input device check on Actions configured Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (256 buckets, 2048 max) ctnetlink v0.93: registering with nfnetlink. ip_tables: (C) 2000-2006 Netfilter Core Team ipt_time loading ClusterIP Version 0.8 loaded successfully arp_tables: (C) 2002 David S. Miller TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Ebtables v2.0 registered 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly. Freeing unused kernel memory: 132k freed Warning: unable to open an initial console. emf: module license 'Proprietary' taints kernel. et_module_init: msglevel set to 0x1 PCI: Setting latency timer of device 0000:00:02.0 to 64 si_doattach: incoming bus is PCI but it's a lie, switching to SI devid:0x4715 Found chip type AI (0x19a14716) Chipc: rev 31, caps 0x184807c9, chipst 0x9800 pmurev 5, pmucaps 0x11242c05 No PLL init done for chip 4716 rev 1 pmurev 5 eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.128.0 wl_module_init: msglevel set to 0x1 wl_module_init: msglevel2 set to 0x0 PCI: Setting latency timer of device 0000:00:01.0 to 64 si_doattach: incoming bus is PCI but it's a lie, switching to SI devid:0x4329 Found chip type AI (0x19a14716) Chipc: rev 31, caps 0x184807c9, chipst 0x9800 pmurev 5, pmucaps 0x11242c05 No PLL init done for chip 4716 rev 1 pmurev 5 Overriding device id = 0x4329 wlc_bmac_attach, deviceid 0x4329 nbands 1 eth1: Broadcom BCM4329 802.11 Wireless Controller 5.10.128.0 (Compiled in . at 11:11:30 on Nov 6 2009) Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. Algorithmics/MIPS FPU Emulator v1.5 br0: starting userspace STP failed, staring kernel STP vlan2: add 33:33:00:00:00:01 mcast address to master interface vlan2: add 01:00:5e:00:00:01 mcast address to master interface vlan2: add 33:33:ff:00:00:01 mcast address to master interface vlan2: dev_set_promiscuity(master, 1) device eth0 entered promiscuous mode device vlan2 entered promiscuous mode si_pmu_fast_pwrup_delay: chip 4716 rev 1 delay 15000 wl0: wlc_switch_ab_11n ERROR 0 restoring amsdu to 0 wl0: wlc_switch_ab_11n ERROR 0 restoring amsdu to 0 wl0: wlc_set_rate_override: 5G band not available wl0: wlc_set_rate_override: 5G band not available si_pmu_fast_pwrup_delay: chip 4716 rev 1 delay 15000 device eth1 entered promiscuous mode br0: port 2(eth1) entering listening state br0: port 1(vlan2) entering listening state br0: port 2(eth1) entering learning state br0: port 1(vlan2) entering learning state br0: topology change detected, propagating br0: port 2(eth1) entering forwarding state br0: topology change detected, propagating br0: port 1(vlan2) entering forwarding state br1: starting userspace STP failed, staring kernel STP vlan2: add 33:33:00:00:00:02 mcast address to master interface vlan2: add 33:33:ff:00:00:00 mcast address to master interface ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver PCI: Setting latency timer of device 0000:00:04.0 to 64 ohci_hcd 0000:00:04.0: OHCI Host Controller ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:04.0: irq 5, io mem 0x18009000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: Setting latency timer of device 0000:00:04.1 to 64 ehci_hcd 0000:00:04.1: EHCI Host Controller ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:04.1: irq 5, io mem 0x18004000 ehci_hcd 0000:00:04.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected vlan1: Setting MAC address to 00 06 4e 00 00 02. vlan1: add 33:33:00:00:00:02 mcast address to master interface vlan1: add 33:33:00:00:00:01 mcast address to master interface vlan1: add 01:00:5e:00:00:01 mcast address to master interface vlan1: add 33:33:ff:00:00:02 mcast address to master interface wl0: wl_link_up: link up vlan1: add 33:33:ff:00:00:00 mcast address to master interface vlan1: del 33:33:00:00:00:02 mcast address from master interface vlan1: del 33:33:ff:00:00:00 mcast address from master interface vlan2: del 33:33:00:00:00:02 mcast address from master interface vlan2: del 33:33:ff:00:00:00 mcast address from master interface ohci_hcd 0000:00:04.0: remove, state 1 usb usb1: USB disconnect, address 1 ohci_hcd 0000:00:04.0: USB bus 1 deregistered ehci_hcd 0000:00:04.1: remove, state 1 usb usb2: USB disconnect, address 1 ehci_hcd 0000:00:04.1: USB bus 2 deregistered vlan1: del 33:33:ff:00:00:02 mcast address from vlan interface vlan1: del 33:33:ff:00:00:02 mcast address from master interface vlan1: del 01:00:5e:00:00:01 mcast address from vlan interface vlan1: del 01:00:5e:00:00:01 mcast address from master interface vlan1: del 33:33:00:00:00:01 mcast address from vlan interface vlan1: del 33:33:00:00:00:01 mcast address from master interface br0: port 2(eth1) entering disabled state br0: port 1(vlan2) entering disabled state vlan2: del 33:33:ff:00:00:01 mcast address from vlan interface vlan2: del 33:33:ff:00:00:01 mcast address from master interface vlan2: del 01:00:5e:00:00:01 mcast address from vlan interface vlan2: del 01:00:5e:00:00:01 mcast address from master interface vlan2: del 33:33:00:00:00:01 mcast address from vlan interface vlan2: del 33:33:00:00:00:01 mcast address from master interface device vlan2 left promiscuous mode br0: port 1(vlan2) entering disabled state wl0: wl_link_down: link down device eth1 left promiscuous mode br0: port 2(eth1) entering disabled state br0: starting userspace STP failed, staring kernel STP vlan2: add 33:33:00:00:00:01 mcast address to master interface vlan2: add 01:00:5e:00:00:01 mcast address to master interface vlan2: add 33:33:ff:00:00:01 mcast address to master interface si_pmu_fast_pwrup_delay: chip 4716 rev 1 delay 15000 wl0: wlc_switch_ab_11n ERROR 0 restoring amsdu to 0 wl0: wlc_switch_ab_11n ERROR 0 restoring amsdu to 0 wl0: wlc_set_rate_override: 5G band not available wl0: wlc_set_rate_override: 5G band not available si_pmu_fast_pwrup_delay: chip 4716 rev 1 delay 15000 device eth1 entered promiscuous mode br0: port 2(eth1) entering listening state br0: port 1(vlan2) entering listening state br0: port 2(eth1) entering learning state br0: port 1(vlan2) entering learning state br0: topology change detected, propagating br0: port 2(eth1) entering forwarding state br0: topology change detected, propagating br0: port 1(vlan2) entering forwarding state br1: starting userspace STP failed, staring kernel STP vlan2: dev_set_promiscuity(master, 1) vlan2: add 33:33:00:00:00:02 mcast address to master interface vlan2: add 33:33:ff:00:00:00 mcast address to master interface ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:04.0: OHCI Host Controller ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:04.0: irq 5, io mem 0x18009000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ehci_hcd 0000:00:04.1: EHCI Host Controller ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:04.1: irq 5, io mem 0x18004000 ehci_hcd 0000:00:04.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected vlan1: Setting MAC address to 00 06 4e 00 00 02. vlan1: add 33:33:00:00:00:02 mcast address to master interface vlan1: add 33:33:00:00:00:01 mcast address to master interface vlan1: add 01:00:5e:00:00:01 mcast address to master interface vlan1: add 33:33:ff:00:00:02 mcast address to master interface wl0: wl_link_up: link up vlan1: add 33:33:ff:00:00:00 mcast address to master interface vlan1: dev_set_allmulti(master, 1) |
# bootlog • >> |
---|
# Decompressing...done Decompressing...done Init Arena Init Devs. Boot partition size = 131072(0x20000) et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.128.0 CPU type 0x19740: 453MHz Tot mem: 32768 KBytes CFE mem: 0x80700000 - 0x8079A6E0 (632544) Data: 0x807317E0 - 0x80733BA0 (9152) BSS: 0x80733BA0 - 0x807346E0 (2880) Heap: 0x807346E0 - 0x807986E0 (409600) Stack: 0x807986E0 - 0x8079A6E0 (8192) Text: 0x80700000 - 0x807317E0 (202720) Copying boot params.....DONEDecompressing...done Init Arena Init Devs. Boot partition size = 131072(0x20000) et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.128.0 CPU type 0x19740: 453MHz Tot mem: 32768 KBytes CFE mem: 0x80700000 - 0x8079A6E0 (632544) Data: 0x807317E0 - 0x80733BA0 (9152) BSS: 0x80733BA0 - 0x807346E0 (2880) Heap: 0x807346E0 - 0x807986E0 (409600) Stack: 0x807986E0 - 0x8079A6E0 (8192) Text: 0x80700000 - 0x807317E0 (202720) Copying boot params.....DONE Bootloader version 2.66.7116.10 boot_version 2.66.7116.10 Press space bar to cancel startup... Committing NVRAM...done Device eth0: hwaddr 00-22-75-F0-8F-DF, ipaddr 192.168.2.1, mask 255.255.255.0 gateway not set, nameserver not set Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: ....... 4165392 bytes read Entry at 0x80001000 Closing network. Starting program at 0x80001000 Linux version 2.6.22 (lichen@fedora10) (gcc version 4.1.2) #1 Fri Nov 6 11:11:05 CST 2009 CPU revision is: 00019740 Found chip type AI (0x19a14716) Chipc: rev 31, caps 0x184807c9, chipst 0x9800 pmurev 5, pmucaps 0x11242c05 No PLL init done for chip 4716 rev 1 pmurev 5 si_kattach done. ccrev = 31, wd_msticks = 32 Determined physical RAM map: memory: 02000000 @ 00000000 (usable) Built 1 zonelists. Total pages: 8128 Kernel command line: root=/dev/mtdblock2 console=ttyS0,115200 init=/sbin/preinit Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, linesize 32 bytes. Synthesized TLB refill handler (20 instructions). Synthesized TLB load handler fastpath (32 instructions). Synthesized TLB store handler fastpath (32 instructions). Synthesized TLB modify handler fastpath (31 instructions). PID hash table entries: 128 (order: 7, 512 bytes) CPU: BCM4716 rev 1 at 453 MHz Using 226.500 MHz high precision timer. Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory: 28240k/32768k available (2810k kernel code, 4528k reserved, 1121k data, 132k init, 0k highmem) Mount-cache hash table entries: 512 NET: Registered protocol family 16 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using membase 8000000 PCI: Initializing host PCI: Reset RC PCI: Fixing up bus 0 PCI: Fixing up bridge PCI: Fixing up bridge PCI: Enabling device 0000:01:00.1 (0004 -> 0006) PCI: Fixing up bus 1 Time: MIPS clocksource has been installed. NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered gpio_init 466 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher fuse init (API version 7.8) io scheduler noop registered (default) Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A loop: module loaded PPP generic driver version 2.4.2 PPP MPPE Compression module registered NET: Registered protocol family 24 Physically mapped flash: Found 1 x16 devices at 0x0 in 8-bit bank Amd/Fujitsu Extended Query Table at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Flash device: 0x800000 at 0x1c000000 Physically mapped flash: squash filesystem with lzma found at block 2037 Creating 4 MTD partitions on "Physically mapped flash": 0x00000000-0x00030000 : "boot" 0x00030000-0x007f0000 : "linux" 0x001fd590-0x007f0000 : "rootfs" 0x007f0000-0x00800000 : "nvram" Found a 0MB serial flash sflash: found no supported devices usbmon: debugfs is not available GACT probability on Mirror/redirect action on u32 classifier input device check on Actions configured Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (256 buckets, 2048 max) ctnetlink v0.93: registering with nfnetlink. ip_tables: (C) 2000-2006 Netfilter Core Team ipt_time loading ClusterIP Version 0.8 loaded successfully arp_tables: (C) 2002 David S. Miller TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Ebtables v2.0 registered 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly. Freeing unused kernel memory: 132k freed Warning: unable to open an initial console. [sighandler]: No more events to be processed, quitting. [cleanup]: Waiting for children. [cleanup]: All children terminated. insmod: ipv6.ko: no module by that name found insmod: scsi_mod.ko: no module by that name found insmod: sd_mod.ko: no module by that name found insmod: usbcore.ko: no module by that name found insmod: usb-ohci.ko: no module by that name found insmod: fat.ko: no module by that name found insmod: vfat.ko: no module by that name found insmod: msdos.ko: no module by that name found Hit enter to continue...waitpid: No child processes waitpid: No child processes waitpid: No child processes waitpid: No child processes waitpid: No child processes waitpid: No child processes waitpid: No child processes waitpid: No child processes waitpid: No child processes waitpid: No child processes waitpid: No child processes waitpid: No child processes waitpid: No child processes waitpid: No child processes vlan2: Operation not supported waitpid: No child processes brctl: No child processes eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Invalid argument eth1: Invalid argument eth1: Operation not supported eth1: Invalid argument eth1: Invalid argument eth1: Invalid argument eth1: Invalid argument eth1: Invalid argument eth1: Invalid argument eth1: Invalid argument eth1: Invalid argument eth1: Invalid argument eth1: Invalid argument eth1: Invalid argument eth1: Invalid argument eth1: Invalid argument eth1: Invalid argument eth1: Invalid argument eth1: Invalid argument eth1: Invalid argument eth1: Invalid argument waitpid: No child processes waitpid: No child processes [Jan 01 00:00:04] radvd: interface vlan1 is not UP [Jan 01 00:00:04] radvd: interface vlan1 does not exist [Jan 01 00:00:04] radvd: error parsing or activating the config file: /tmp/radvd.conf HTTPD: main(919) udhcpd_main(139): udhcp server (v0.9.8) started udhcpd_main(139): udhcp server (v0.9.8) started waitpid: No child processes AVDevice_common_init Reaped 313 ut->en 1 ut->name ushare ut->model_name uShare ut->override_iconv_err 0 ut->xbox360 1 DIR list /media/sda1 uShare (version 1.1a), a lightweight UPnP A/V and DLNA Media Server. Benjamin Zores (C) 2005-2007, for GeeXboX Team. See http://ushare.geexbox.org/ for updates. Building Metadata List ... Looking for files in content directory : /media/sda1 scandir: No such file or directory Found 1 files and subdirectories. UPnP daemon is ready to run killall: wps_monitor: no process killed waitpid: No child processes killall: wps_ap: no process killed killall: wps_enr: no process killed ses: No such file or directory Set 2.4G Board Limits Set 2.4G Regulatory Limits to FCC WARNING: console log level set to 1 original zone=GMT+8 modified dst=GMT ses_cl: No such file or directory Set 2.4G Board Limits Set 2.4G Regulatory Limits to FCC WARNING: console log level set to 1 original zone=GMT+8 modified dst=GMT waitpid: No child processes startsmbfilepwent_internal: file /tmp/smbpasswd did not exist. File successfully created. share memory key=74565 successful id on creating=32769 original zone=GMT+8 modified dst=GMT vlan1: Operation not supported waitpid: No child processes waitpid: No child processes udhcpc_main(302): udhcp client (v0.9.8) started original zone=GMT+8 modified dst=GMT waitpid: No child processes vlan1 dhcp vlan1: No such process Stop DDNS service! Hit enter to continue...connect: Network is unreachable Hit enter to continue... BusyBox v1.7.2 (2009-11-06 11:14:29 CST) built-in shell (ash) Enter 'help' for a list of built-in commands. # # original zone=GMT+8 modified dst=GMT Portrd: Add iptable command: iptables -t nat -A POSTROUTING -s 192.168.2.0/24 -o vlan1 -j MASQUERADE iptables -t nat -A POSTROUTING -s 192.168.169.0/24 -o vlan1 -j MASQUERADE |
# nvram • >> |
---|
sb/1/ofdm2gpo=0x2222 wl_radius_port=1812 wan_unit=0 wl0_wmf_bss_enable=0 wan0_primary=1 pci/1/1/mcs5gpo0=0 pci/1/1/stbcpo=0 wan_route= ses_wds_mode=1 wl0_frameburst=on pci/1/1/mcs5gpo1=0 wl_txstreams=0 pci/1/1/maxp5gha0=0x3c pci/1/1/mcs5gpo2=0 wan_pppoe_keepalive=0 wan_pptp_ip= filter_client_url0= wan0_ipaddr=1.0.0.1 pci/1/1/maxp5gha1=0x3c pci/1/1/mcs5gpo3=0 log_ipaddr= wan0_proto=dhcp boardrev=0x1100 pci/1/1/mcs5gpo4=0 br0_ifnames=vlan2 eth1 wl0.14_hwaddr=02:22:75:F0:8F:DD pci/1/1/mcs5gpo5=0 pci/1/1/aa5g=0x3 pci/1/1/mcs5gpo6=0 pci/1/1/mcs5gpo7=0 wl_nctrlsb=none wan0_pptp_dhcp=dhcp sb/1/mcs2gpo0=0 wl_version=5.10.128.0 wl0_leddc=0x640000 sb/1/mcs2gpo1=0 et0macaddr=00:22:75:F0:8F:DF ddns_enable=disabled sb/1/mcs2gpo2=0x2222 sb/1/mcs2gpo3=0x2222 wl0_akm=psk2 wl0_radarthrs=0 0x6a8 0x6c8 0x6ac 0x6c7 sb/1/mcs2gpo4=0x2222 pci/1/1/pa5glw2a0=0xfa8e wan_pppoe_passwd= wl_maxassoc=128 wl0_guest_mode=0 wan0_dns= sb/1/mcs2gpo5=0x2222 pci/1/1/pa5glw2a1=0xfabc boot_wait=on watchdog=3000 sb/1/mcs2gpo6=0x2222 wl_phytypes= wl_leddc=0x640000 wps_modelname=Belkin wl0_infra=1 sb/1/mcs2gpo7=0x2222 bt_autoDelTorrent=1 wl0_country_code= fw_disable=0 emf_rtport_entry= bt_autoRateControl=1 wps_config_command=0 gs_remote_mgmt=0 gs_dmzEnable=0 gui_version=3.00.15 ddns_wildcard= wl_infra=1 reset_gpio=6 ses_event=2 ddns_server=0 wan0_bigpond_passwd= wl0_bcn_rotate=1 pmon_ver=CFE 5.10.128.0 bw_maxTx=100000000 restore_defaults=0 wan0_ifname=vlan1 vlan2ports=1 2 3 4 8* wl0.1_hwaddr=02:22:75:F0:8F:D0 wan0_pptp_demand=0 wl0_wme_sta_be=15 1023 3 0 0 off off wl0_nctrlsb=none pci/1/1/cddpo=0 wan_lease=86400 wan_pppoe_service= wl0_version=5.10.128.0 sb/1/triso2g=3 wl_wme_apsd=on sb/1/sromrev=8 http_wanport=8080 wl_radius_ipaddr= ddns_hostname= eco_wlan_start=0 wl0.7_hwaddr=02:22:75:F0:8F:D6 lan_gateway=192.168.2.1 wl0_ifname=eth1 dst_time_zone=GMT lan_domain=Belkin lan_ipv6_prefix=2001:db8:1:0::/64 wl0_wme_sta_bk=15 1023 7 0 0 off off pci/1/1/ag0=2 timer_interval=3600 dhcp_reserveIndex=0 pci/1/1/ag1=2 gpio2=robo_reset wan_bigpond_sindex=0 bt_autoHideMode=1 lan1_ipaddr=192.168.169.1 forward_port0= wl_net_reauth=900 wl0_rxstreams=0 ses_enable=1 wan_pppoe_mru=1492 lan_route= wl0_mrate=0 gpio8=wps_button wps_device_pin=54432963 time_zone_index=4 wl1_channel=36 wps_hw_enable=1 wl0_mode=ap pci/1/1/pa5gw2a0=0xfae3 wan_gateway=1.0.0.1 sb/1/pa2gw2a0=0xfaa0 pci/1/1/pa5gw2a1=0xfb08 serial=0 dhcp_start=192.168.2.2 sb/1/pa2gw2a1=0xfaaf wl0_ap_isolate=0 lan1_route= pci/1/1/pa5ghw2a0=0xfb01 dhcp_end=192.168.2.100 wl_mrate=0 wan_bigpond_enable=0 wan0_pptp_subnet= sb/1/itt2ga0=0x20 pci/1/1/pa5ghw2a1=0xfb0a wl_wmf_bss_enable=0 wl_akm= wps_get_stauts=0 wl0.15_hwaddr=02:22:75:F0:8F:DE wl0_wme_no_ack=off wl0_ampdu=auto wl0_gmode=1 sb/1/itt2ga1=0x20 login_timeout=10 eco_led_dim=0 dlna_enabled=1 boardtype=0xa4cf is_default=0 wl_wme_bss_disable=0 wl_ampdu_rr_rtylimit_tid=2 2 2 2 2 2 2 2 wl0_nband=2 wan0_bigpond_srver= wl_gmode=1 wl_ampdu=auto wps_uuid=D3B97C07D2622AFA994E99A807514A79 qos_prof0_rule0= ddns_password= stats_server= pci/1/1/rxchain=3 pci/1/1/itt5ga0=0x3e eco_wlan=0 bw_peekTx=178 wl0_nreqd=0 pci/1/1/itt5ga1=0x3e lan_netmask=255.255.255.0 wps_enr_mode=disabled wl0_wme_txp_be=7 3 4 2 0 lan1_ifname=br1 wan_pptp_demand=0 wl_nband=2 wl0_dtim=3 wl0_ssid=MI4DB49QBRQT7QA_Network lan1_hwnames= wan_pptp_hostname= http_username= wl_wme_sta_vi=7 15 2 6016 3008 off off wan0_pppoe_ifname= pci/1/1/maxp5ga0=0x40 wl_nreqd=0 wl_wme_ap_be=15 63 3 0 0 off off wan_bigpond_user_name= wl0_dfs_preism=60 pci/1/1/maxp5ga1=0x40 os_date=Nov 6 2009 lan_ap_ipaddr=192.168.2.254 sb/1/regrev=20 access_control_member0= wl0_wme_txp_bk=7 3 4 2 0 sb/1/ag0=0 http_lanport=80 sb/1/ag1=0 pci/1/1/pdetrange5g=4 wl_plcphdr=long wl_wme_sta_vo=3 7 2 3264 1504 off off lan1_wins= wl_macmode=disabled nvram_version=1 wan_hwname= wan_domain= wl_wme_ap_bk=15 1023 7 0 0 off off wl0_key1= wan0_pptp_enable=0 lan_lease=5184000 wan_netmask=255.255.255.0 wl_phytype=n wl0_vlan_prio_mode=off wl0_key2= wan0_hostname= wl_lazywds=0 wl0.2_hwaddr=02:22:75:F0:8F:D1 wl0_key3= wl_dfs_postism=60 wl0_key4= filter_client0= wps_default_pin=54432963 lan1_lease=86400 filter_maclist= pci/1/1/boardflags=0x200 wl_auth_mode=none wl0.8_hwaddr=02:22:75:F0:8F:D7 vlan2hwname=et0 wan_pptp_subnet= wl0_hw_rxchain=3 pci/1/1/pa5glw1a0=0x1637 pci/1/1/mcs5glpo0=0 http_passwd= wl_wpa_psk= wl_guest_passwd=123456 sb/1/extpagain2g=2 pci/1/1/pa5glw1a1=0x1591 pci/1/1/ofdm5gpo=0 pci/1/1/mcs5glpo1=0 bt_torrentFolder=torrent pci/1/1/mcs5glpo2=0 lan_stp=1 wan_pppoe_demand=0 nat_type=cone wl0_wme_ap_vi=7 15 1 6016 3008 off off wan0_pptp_idletime=5 pci/1/1/mcs5glpo3=0 wl0_bss_maxassoc=128 pci/1/1/mcs5glpo4=0 wl_mode=ap igmp_proxy_func=1 wan0_pppoe_passwd= pci/1/1/mcs5glpo5=0 pci/1/1/mcs5glpo6=0 gs_sku_id=1 wl0_plcphdr=long wl0_rate=0 wl0_closed=0 pci/1/1/mcs5glpo7=0 wan_pptp_gateway= wl0.10_hwaddr=02:22:75:F0:8F:D9 wl0_macmode=disabled xtalfreq=20000 wl_wpa_gtk_rekey=0 wps_unconfig_addenr=0 wl0_wme_ap_vo=3 7 1 3264 1504 off off wl0_radioids=BCM2056 wan0_pptp_ip= sb/1/stbcpo=0 lan_dhcp=0 wl0_phytype=n wl_wme_txp_vi=7 3 4 2 0 wl0_lazywds=0 usb_mounted_nodes=/dev/sda1 wps_proc_status=0 wan0_pppoe_keepalive=0 boardflags2=0x402 sb/1/aa2g=3 sb/1/bwduppo=0 wl0_afterburner=off sb/1/txchain=3 wl_wme_txp_vo=7 3 4 2 0 wl0_antdiv=-1 lan_hwaddr=00:22:75:F0:8F:DF wl_wds_timeout=1 ddns_started=0 wan_dns= filter_client_srv0= wl_wps_mode=enabled wan0_pppoe_ac= pci/1/1/bw40po=0 wan_pptp_enable=0 wl_ssid=Belkin_N+_F08FDF wl_dtim=3 project_id=00n1 wl0_wpa_psk=i05c-zof6-s6of pci/1/1/sromrev=8 wan_pppoe_mtu=1454 wl_radarthrs=0 0x6a8 0x6c8 0x6ac 0x6c7 ac_schedule0=inactive wait_time=3 bt_autoHideSec=86400 ac_schedule1=inactive wan0_pppoe_ip=0.0.0.0 ac_schedule2=inactive wl0_amsdu=auto wan0_pptp_username= ac_schedule3=inactive wan0_pppoe_dhcp=dhcp bt_torrentDLimit=50 ac_schedule4=inactive dhcp_wins=wan ac_schedule5=inactive os_server= ac_schedule6=inactive ac_schedule7=inactive pci/1/1/pa5gw1a0=0x1497 wan_proto=dhcp wan_pptp_serviceip= wl_key1= wl_amsdu=auto ac_schedule8=inactive sb/1/pa2gw1a0=0x16ed pci/1/1/pa5gw1a1=0x1334 wl_key2= ac_schedule9=inactive wl0_unit=0 wan0_pppoe_mru=1492 sb/1/pa2gw1a1=0x17a7 wl_key3= wl_country_code= wl_key4= pci/1/1/pa5ghw1a0=0x144b wl_hwaddr= wl0.3_hwaddr=02:22:75:F0:8F:D2 pci/1/1/pa5ghw1a1=0x137b wl0_net_reauth=900 wl0_bss_enabled=1 sb/1/boardflags2=0x402 wl_vlan_prio_mode=off remote_mgmt_enabled=0 wps_count=0 gs_wftp_enabled=0 bt_torrentExitHour=1 wl0_nmode=-1 lan1_stp=1 wps_timeout_enable=0 wl0.9_hwaddr=02:22:75:F0:8F:D8 gs_obscure_psk5g=0 board_version=01A wan_pppoe_idletime=5 wps_restart=0 wan0_bigpond_sindex=0 wl_nmode=-1 gs_domainName=Belkin bt_torrentULimit=20 lan1_gateway=192.168.169.1 remote_mgmt_ip= serial_number=12952823501927 wl_rxstreams=0 ses_cl_enable=1 wl_wps_reg=enabled wl0_wds= wl_rate=0 wan0_gateway=1.0.0.1 log_level=0 wl0_reg_mode=off ntp_server=192.43.244.18 192.5.41.41 133.100.9.2 wan_hwaddr= wps_mfstring=Belkin lan_ipv6_dns= wl0.11_hwaddr=02:22:75:F0:8F:DA wan0_bigpond_enable=0 lan_ifnames=vlan2 eth1 bandwidth_var_5=1 first_bootup=0 wl0_radius_port=1812 wl0_wme=on wl0_auth=0 wan_bigpond_srver= wl0_rxchain=3 wl0_radius_ipaddr= wl0_wme_bss_disable=0 wl0_wme_sta_vi=7 15 2 6016 3008 off off pci/1/1/boardflags2=0x0 ure_disable=1 sb/1/boardflags=0x310 wan_pppoe_username= sb/1/leddc=0xffff wan_ifnames=vlan1 wl0_wme_sta_vo=3 7 2 3264 1504 off off wan0_domain= wan0_hwname= pci/1/1/ledbh0=0 wl_rateset=12 wl_crypto=tkip+aes pci/1/1/ledbh1=0 pci/1/1/ledbh2=0 pci/1/1/pa5glw0a0=0xfe87 wl_guest_timeout=720 wl0_wps_reg=enabled pci/1/1/ledbh3=0 pci/1/1/pa5glw0a1=0xfe9a clkfreq=453,226,113 lan_ipaddr=192.168.2.1 os_name=linux lan_proto=dhcp wl_radius_key= allow_remote_ip=1 wl0_maxassoc=128 vlan1hwname=et0 lan1_netmask=255.255.255.0 wan0_route= wl_unit=0 wan_bigpond_manual=0 wl0_phytypes=n wan0_pppoe_demand=0 wl0_frag=2346 wl0_wep=disabled wps_button_assertlvl=0 router_disable=0 lan1_proto=dhcp filter_client_sch0= wl_nmode_protection=off wps_sta_pin=00000000 wan0_netmask=255.255.255.0 ddns_username= wl0.4_hwaddr=02:22:75:F0:8F:D3 wan0_pptp_gateway= sdram_config=0x284 gs_apMode=0 wan0_wins= vlan1ports=0 8 dmz_ipaddr= gs_obscure_psk=0 wl_wds= wan_pptp_idletime=5 wps_pinfail=0 pci/1/1/mcs5ghpo0=0 pci/1/1/mcs5ghpo1=0 wl0_ampdu_rr_rtylimit_tid=2 2 2 2 2 2 2 2 wl0_rateset=12 pci/1/1/mcs5ghpo2=0 pci/1/1/bwduppo=0 wl0.1_ssid=Belkin_N+_Guest pci/1/1/txchain=3 pci/1/1/mcs5ghpo3=0 loader_version=2.66.7116.10 wl0_wme_apsd=on eco_mode_started=0 pci/1/1/mcs5ghpo4=0 sb/1/macaddr=00:22:75:F0:8F:DF wl0_wme_txp_vi=7 3 4 2 0 sb/1/ccode=US pci/1/1/mcs5ghpo5=0 wl0_txstreams=0 pci/1/1/ofdm5glpo=0 pci/1/1/mcs5ghpo6=0 wl_wme=auto pci/1/1/antswitch=0 pci/1/1/mcs5ghpo7=0 lan_ifname=br0 wan_primary=0 wl_wme_ap_vi=7 15 1 6016 3008 off off ht_remote_ip=192.168.2.2 boardflags=0x310 lan_ipv6_6to4id=0 wan0_pppoe_mtu=1454 sdram_refresh=0x213a wandevs=vlan1 wl0_wme_txp_vo=7 3 4 2 0 sb/1/cck2gpo=0 dhcp_domain=wan wl0.12_hwaddr=02:22:75:F0:8F:DB wl_auth=0 wps_proc_mac= sdram_ncdl=0x63000024 pci/1/1/pa5gw0a0=0xfecd sb/1/pa2gw0a0=0xfeb0 pci/1/1/pa5gw0a1=0xfe9d lan1_domain= wl_wme_ap_vo=3 7 1 3264 1504 off off sb/1/pa2gw0a1=0xfedc hardware_version=F5D8235-4 v3 default_wan_macaddr=00:22:75:F0:8F:E0 hw_version=0B ezc_enable=1 wl_frameburst=on wl_bss_maxassoc=128 lang_code=6 wl0_nmode_protection=off wan0_lease=86400 pci/1/1/pa5ghw0a0=0xfedc pci/1/1/ofdm5ghpo=0 pci/1/1/pa5ghw0a1=0xfeb2 wan_pppoe_dhcp=dhcp qos_enable=1 is_modified=0 wan_ipaddr=1.0.0.1 lan_ipv6_mode=3 wan_pptp_username= gs_samba_enabled=1 dlna_xbox=1 wl0_rts=2347 time_zone_DST=1 sb/1/devid=0x4329 sb/1/bw40po=0 lan1_dhcp=0 wan_wins= wl_ifname= qm_prof0= pci/1/1/leddc=0xffff wl_wep=disabled wl_nbw_cap=0 wl_ampdu_rtylimit_tid=5 5 5 5 5 5 5 5 gs_remote_mgmt_port=8080 wl0_hw_txchain=3 lan_ap_netmask=255.255.255.0 wps_show_status=10 os_version=3.00.15 wl_guest_mode=0 wl0_wpa_gtk_rekey=0 pci/1/1/triso5g=3 wan_pptp_dhcp=dhcp wan_bigpond_passwd= wl0_sta_retry_time=5 bt_torrentTimeout=60 wan0_desc=Default Connection wan0_pptp_serviceip= pci/1/1/extpagain5g=2 wl_frag=2346 wl0_key=1 ses_cl_event=0 filter_macmode=deny wl_maclist= wps_addER=0 emf_entry= et0phyaddr=30 console_loglevel=1 dhcp_reserveIP= wl0.5_hwaddr=02:22:75:F0:8F:D4 bl_version=1.0.37 time_zone=GMT+8 filter_client_key0= wl_bcn_rotate=1 wl_wps_config_state=0 wan0_pppoe_service= wan0_pppoe_idletime=5 wan_ifname=vlan1 wan0_ipv6_prefix=2001:db0:1:0::/64 wl_wme_sta_be=15 1023 3 0 0 off off dlna_ps3=1 sb/1/pdetrange2g=2 wan0_hwaddr=00:22:75:F0:8F:E0 wl_radioids= dlna_folder=/media/sda1 wl0_dfs_postism=60 landevs=vlan2 wl0 wan_hostname= wl0_radio=1 dhcp1_start=192.168.169.2 wl_corerev= wl_nmcsidx=-1 wl0_nbw_cap=0 dhcp_reserveRemoveId=0 wl0_bcn=100 wps_mode=enabled wl_wme_sta_bk=15 1023 7 0 0 off off wps_currentband= gs_fw_auto=0 gs_usb_enabled=1 wl0_hwaddr=00:22:75:F0:8F:DF wl_radio=1 wl_afterburner=off ddns_timeout= wan0_pptp_passwd= pci/1/1/ccode=0 wl0_ampdu_rtylimit_tid=5 5 5 5 5 5 5 5 sb/1/tssipos2g=1 ezc_version=2 emf_enable=0 wl0.13_hwaddr=02:22:75:F0:8F:DC wan0_bigpond_user_name= bw_maxRx=100000000 wl0_maclist= bt_started=0 bt_torrentExitRatio=0.75 sdram_init=0x0419 wl_rts=2347 log_ram_enable=1 firewall_version=1.3.8 sb/1/antswctl2g=2 lan_wins= wan_desc= wl_ap_isolate=0 bt_contentFolder=download lan_hwnames= wps_modelnum=123456 qos_prof_idx=0 wps_method=1 lan1_ifnames=wl0.1 wl0.2 wl0.3 wl1.1 wl1.2 wl1.3 lan_upnp_wfa_subc_num=0 dhcp1_end=192.168.169.100 wl_wme_no_ack=off wan0_unit=0 wan0_pppoe_username= remote_auto_fw=0 wl0_wps_config_state=1 wl0_radius_key= wl0_wme_ap_be=15 63 3 0 0 off off qos_prof0= wl0_nmcsidx=-1 wl0_corerev=17 wan0_ifnames=vlan1 bw_qos_changed=0 bigpond_started=0 wl_key=1 obscurePSK=1 pci/1/1/regrev=0 wl0_channel=0 wps_aplockdown=0 wl0_wds_timeout=1 sb/1/ledbh0=0 pci/1/1/tssipos5g=1 wps_device_name=BelkinAP eco_wlan_end=0 sb/1/ledbh1=0 sb/1/maxp2ga0=0x40 wl0_wme_ap_bk=15 1023 7 0 0 off off wl0_wps_mode=enabled sb/1/ledbh2=0 sb/1/maxp2ga1=0x40 pci/1/1/devid=0x4355 upnp_enable=1 wl_bss_enabled=1 wan0_pptp_hostname= sb/1/ledbh3=0 wps_config_method=0x84 wl_wme_txp_be=7 3 4 2 0 gs_login_timeout=10 wan_pppoe_ac= wan_ipv6_prefix=2001:db0:1:0::/64 gs_remote_mgmt_ip=192.168.2.7 wan0_bigpond_manual=0 sb/1/cddpo=0 pci/1/1/macaddr=00:06:4E:00:00:01 emf_uffp_entry= gs_pingWanBlock=1 eco_wlan_days=0 0 0 0 0 0 0 ddns_status=disabled wps_status=0 wl0_guest_passwd=123456 lan1_hwaddr=00:00:00:00:00:00 wl_dfs_preism=60 sb/1/rxchain=3 wan_pppoe_ip=0.0.0.0 wl_sta_retry_time=5 wl0_auth_mode=none wl_closed=0 wl_wme_txp_bk=7 3 4 2 0 ac_schedule10=inactive autofw_port0= wl0.6_hwaddr=02:22:75:F0:8F:D5 gs_ftp_enabled=0 ac_schedule11=inactive wl0_crypto=aes boardnum=12345 ac_schedule12=inactive wl0_txchain=3 sb/1/antswitch=0 wan_pppoe_ifname= wan_pptp_passwd= bt_maxDownloads=3 dhcp_reserveMAC= ac_schedule13=inactive usbsms_boot=1 wl_bcn=100 ac_schedule14=inactive reconnect_info=no pci/1/1/maxp5gla0=0x3a wl_reg_mode=off ac_schedule15=inactive pci/1/1/maxp5gla1=0x3a ac_schedule16=inactive ac_schedule17=inactive pci/1/1/antswctl5g=0 ac_schedule18=inactive wl0_guest_timeout=720 wl_antdiv=-1 ac_schedule19=inactive |
Pictures
- Belkin
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM4718A1
- Broadcom
- Embedded System MIPS 74Kc
- Embedded System
- Embedded System BCM53115
- Manuf Arcadyan
- DD-WRT Supported
- Tomato Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation