BandLuxe R528
bgn (N300) | |
|---|---|
| Embedded LTE WiFi VoIP Router, Home Gateway | |
| Homepage | |
| WikiDevi.wi-cat.ru | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt |
Status Unknown |
| Tomato any flavor |
Incompatible |
| Platform | |
| Brand • Model • Rev |
BandLuxe R528 |
| FCC ID | |
| Type |
wireless router, analog phone gateway |
| CPU1 |
Ralink Model? |
| Flash1 Chip |
Eon EN25Q128-104FIP |
| Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Chip |
SK hynix H5PS1G63EFR-S6C |
| ETH chip1 |
Ralink Model? |
| Ethernet Port Count |
1-WAN 1-100MbE-LAN |
| Wired Standard |
IEEE 802.3i/3u |
| Expansion IF types |
Mini PCIe (USB only) |
| Mini PCIe slots |
1 |
| Power |
12 VDC, 2 A |
| Connector type |
barrel |
|
Flags: 4G, CDMA | |
| Other | |
|
Default SSID: LTE_ROUTER | |
| Manuf/OEM/ODM |
Gemtek WVRTR-124GN |
| Retail | |
| FCC approval date | 19 April 2012 |
| Radio 1 | |
| Chip1 |
Ralink Model? |
| Wireless interface OUI |
00:26:FA |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
This device uses a Ralink RT??52 SoC.
"HW00741015 WVRTR-124GN_V01" and "ESX-X04-0701 RoHS" is silkscreened on the board in the FCC photos.
The Mini PCIe (USB) slot is occupied by a mobile broadband modem using the Qualcomm MDM9600 (Gobi) chip.
There is a label on the bottom of the board (in the FCC photos) with a MAC starting with 00:26:FA (BandRich).
The FCC router manual's sample SSID is LTE_ROUTER, which does seem to be used by (a very small number of) some BandRich (OUI 00:26:FA) devices. This is presumed to be the SSID (and OUI) for the device. The default IP may be 192.168.1.1, but the manual does not list the default credentials (Please refer to the Quick Start Guide included in the package.).
