Astoria ARV7510PW22
From TechInfoDepot
(Redirected from Arcadyan ARV7510PW22)
Jump to navigationJump to searchbgn (N300) | |
|---|---|
| ADSL2 Wireless Router | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Astoria ARV7510PW22 |
| FCC ID |
none specified |
| Type |
wireless router, dsl modem |
| CPU1 |
Lantiq PSB 50702 |
| CPU1 Type |
MIPS 24Kec |
| CPU1 Speed |
333 MHz ( 2 cores ) |
| Flash1 Chip |
Macronix MX29GL128ELT2I-90G |
| Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
Zentel A4S12D40FTP-G5 |
| ETH chip1 |
Lantiq PSB 50702 |
| Switch |
Atheros AR8216 |
| DSL Ports |
1 |
| VOIP Ports |
2 |
| Ethernet Port Count |
4-100MbE-LAN |
| Wired Standard |
IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Stock bootloader |
brnboot |
| Expansion IF types |
USB 2.0 |
| USB ports |
3 |
| USB Hub Compatible |
Untested |
| Power |
15 VDC, 1.2 A |
| Connector type |
barrel |
| Serial Port (UART) |
yes, (115200 8N1) |
|
Flags: ADSL2+ Annex A | |
| Other | |
|
| |
| Manuf/OEM/ODM | |
| 3rd Party Firmware Support | |
| Radio 1 | |
| Chip1 |
Ralink RT3062F |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Lantiq (Intel) chipsets with specifications, see Lantiq.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: lantiq
OpenWrt Subtarget: xway
OpenWrt Package architecture: mips_24kc
Support started version: 14.07
Current supported version: 23.05.5
Comment:
Same as toh/arcadyan/arv7510pw or not?
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: lantiq
OpenWrt Subtarget: xway
OpenWrt Package architecture: mips_24kc
Support started version: 14.07
Current supported version: 23.05.5
Comment:
Same as toh/arcadyan/arv7510pw or not?
Please insert instructions here
Categories:
- Astoria
- Embedded system/wireless router
- Embedded system/dsl modem
- Embedded System Lantiq
- Embedded System PSB 50702
- Lantiq
- Embedded System MIPS 24Kec
- Embedded System
- Embedded System Atheros
- Embedded System AR8216
- Atheros
- Manuf Arcadyan
- OpenWrt Supported
- Embedded System Ralink
- Embedded System RT3062F
- Ralink
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation
