Adtran Bluesocket BSAP-3040

From TechInfoDepot
Jump to navigationJump to search
abgn+ac (AC2600)
Enterprise Wi-Fi Access Point
1700965F1.jpg
Homepage
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
Adtran Bluesocket BSAP-3040 (1700965F1)
FCC ID
IC ID
Board ID
7016A122300X
Type
enterprise access point
CPU1
Freescale (NXP) T1023E
CPU1 Type
Power ISA
CPU1 Speed
1.2 GHz ( 2 cores )
Flash1 Chip
Spansion FL256SAIFR0
Flash1 Size
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
Flash2 Chip
Kingston EMMC04G-M627
Flash2 Size
4 GiB 4,096 MiB <br />4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br />
RAM1 Size
1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br />
RAM1 Chip
Nanya NT5CC256M16DP-DI x 2
ETH chip1
Atheros AR8035-A
ETH chip2
Aquantia AQR112
Ethernet Port Count
1-2.5GbE-WAN
1-1GbE-LAN
Wired Standard
IEEE 802.3i/3u/3ab/3bz

802dot11 OUI: 00:19:92 (4 E, 4 W)
Ethernet OUI: 00:19:92 (4 E, 4 W)

Stock bootloader
U-Boot 2015.01 geb3d4fc
Stock FW OS
Linux 3.12.37 -rt51+g43cecda943a
Expansion IF types
Mini PCIe, USB 2.0
Mini PCIe slots
2
USB ports
1
USB Hub Compatible
Untested
PoE
802.3at, standard
Power
12 VDC, 3 A
Connector type
barrel
Serial Port (UART)
yes, 4-pin header, populated, 3.3V TTL, (115200 8N1), J6, console port (RJ45)
JTAG Port
16-pin header, EJTAG 1.2
Flags:
Wave2, MU-MIMO, Bluetooth
Other

Default IP address: 192.168.190.1
the IP 192.168.190.1 is used by 4 additional devices
of which 4 are Adtran devices
Default login user: adm1n
Default login password: blue1socket
adm1n:blue1socket credentials used by 5 additional devices
of which 5 are Adtran devices

Manuf/OEM/ODM
Senao IAP-8350AG
Retail
ASIN B072LCH99T Flag of the United States.svg
Country of manuf Taiwan
Radio 1
Radio1 module
Radio1 module IF
Mini PCIe (oversized)
Chip1
Qualcomm Atheros QCA9984
Wireless interface OUI
00:19:92
Antenna Connector Type
U.FL
MIMO status
4x4:4
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 600 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio 2
Radio2 module
Radio2 module IF
Mini PCIe (oversized)
Chip1
Qualcomm Atheros QCA9984
Wireless interface OUI
00:19:92
Antenna Connector Type
U.FL
MIMO status
4x4:4
Wireless Standard
IEEE 802.11a/n/ac
802.11ac
up to 1733 Mbps
802.11n
up to 600 Mbps
802.11a
up to 54 Mbps
WiFi Operating Frequency
5 GHz

For a list of all currently documented Aquantia SoC's with specifications, see Aquantia.
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

For a list of all currently documented Adtran device with specifications, see Adtran.

1733 Mbps - 4SS 5GHz 802.11ac (80MHz chan.),
800 Mbps - 4SS 2.4GHz 802.11n (40MHz chan., 256-QAM) = AC2600 class

Overview

  • Silkscreen on the PCB reads 7016A1223004 Ver: 1.0

JTAG-Serial Info

JTAG

16-pin header, EJTAG 1.2

Serial

Boot log

stock boot messages
SPI boot...
Initializing....using SPD
WARNING: Calling __hwconfig without a buffer and before environment is ready
WARNING: Calling __hwconfig without a buffer and before environment is ready
WARNING: Calling __hwconfig without a buffer and before environment is ready
Loading second stage boot loader .................................................................................................ddr self refresh double times(0xfe00_8114):0c300100ddr self refresh interval(0xfe00_8124):0c300100

U-Boot 2015.01.IAP8350.8351_v0.11_PVT_WithSN.MacTool_Trfc+SDKv1.9+geb3d4fc (Nov 15 2016 - 11:07:21)

CPU0:  T1023E, Version: 1.0, (0x85490010)
Core:  e5500, Version: 2.1, (0x80241021)
Single Source Clock Configuration
Clock Configuration:
       CPU0:1200 MHz, CPU1:1200 MHz,
       CCB:400  MHz,
       DDR:800  MHz (1600 MT/s data rate) (Asynchronous), IFC:100  MHz
       QE:200  MHz
       FMAN1: 600 MHz
       QMAN:  400 MHz
L1:    D-cache 32 KiB enabled
       I-cache 32 KiB enabled
Reset Configuration Word (RCW):
       00000000: 0810000c 00000000 00000000 00000000
       00000010: 4a800003 80000012 ec027000 21000000
       00000020: 00000000 00000000 00000000 0002c500
       00000030: 00000104 44020201 00000000 00000006
Board: BSAP3040/5, booting from SPI
SERDES Reference Clocks:
SD1_CLK1=156.25MHZ, SD1_CLK2=100.00MHZ
I2C:   ready
SPI:   ready
DRAM:  Detected UDIMM Fixed DDR on board
Not enough bank(chip-select) for CS0+CS1 on controller 0, interleaving disabled!
1 GiB (DDR3, 32-bit, CL=11, ECC off)
L2:    256 KiB enabled
Corenet Platform Cache: 256 KiB enabled
Using SERDES1 Protocol: 149 (0x95)
MMC:   FSL_SDHC: 0
SF: Detected S25FL256S_64K with page size 256 Bytes, erase size 64 KiB, total 32 MiB
EEPROM: Invalid ID (ff ff ff ff)
PCIe1: Root Complex, x1 gen2, regs @ 0xfe240000
  01:00.0     - 168c:0046 - Network controller
PCIe1: Bus 00 - 01
PCIe2: Root Complex, x1 gen2, regs @ 0xfe250000
  03:00.0     - 168c:0046 - Network controller
PCIe2: Bus 02 - 03
PCIe3: Root Complex, x1 gen1, regs @ 0xfe260000
  05:00.0     - 168c:0050 - Network controller
PCIe3: Bus 04 - 05
In:    serial
Out:   serial
Err:   serial
Net:   SF: Detected S25FL256S_64K with page size 256 Bytes, erase size 64 KiB, total 32 MiB
Fman1: Uploading microcode version 108.4.2
FM1@DTSEC4, FM1@TGEC1 [PRIME]
Adtran bootloader version 1.0.6
SF: Detected S25FL256S_64K with page size 256 Bytes, erase size 64 KiB, total 32 MiB
SF: Detected S25FL256S_64K with page size 256 Bytes, erase size 64 KiB, total 32 MiB
Erasing SPI flash...Writing to SPI flash...done
SF: Detected S25FL256S_64K with page size 256 Bytes, erase size 64 KiB, total 32 MiB
SF: 12582912 bytes @ 0x140000 Read: OK
SF: 65536 bytes @ 0x1940000 Read: OK
WARNING: adjusting available memory to 30000000
## Booting kernel from Legacy Image at 01000000 ...
   Image Name:   Linux-3.12.37-rt51+g43cecda943a
   Created:      2018-03-20  15:16:07 UTC
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    4610511 Bytes = 4.4 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 00c00000
   Booting using the fdt blob at 0xc00000
   Uncompressing Kernel Image ... OK
   Loading Device Tree to 03fe6000, end 03fff753 ... OK
Using CoreNet Generic machine description
Memory CAM mapping: 256/256/256 Mb, residual: 256Mb
Linux version 3.12.37-rt51+g43cecda943a (buildagent@jenkins12-hsv) (gcc version 4.9.2 (GCC) ) #1 SMP Tue Mar 20 15:14:01 UTC 2018
No /soc@ffe000000/qman@318000 property 'fsl,qman-fqd', using memblock_alloc(0000000000400000)
No /soc@ffe000000/qman@318000 property 'fsl,qman-pfdr', using memblock_alloc(0000000002000000)
Qman ver:0a01,03,01,03
No /soc@ffe000000/bman@31a000 property 'fsl,bman-fbpr', using memblock_alloc(0000000001000000)
Bman ver:0a02,02,01
No USDPAA memory, no 'usdpaa_mem' bootarg
CPU maps initialized for 1 thread per core
bootconsole [udbg0] enabled
setup_arch: bootmem
CoreNet Generic board from Freescale Semiconductor
arch: exit
Zone ranges:
  DMA      [mem 0x00000000-0x2fffffff]
  Normal   empty
  HighMem  [mem 0x30000000-0x3fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00000000-0x3fffffff]
MMU: Allocated 1088 bytes of context maps for 255 contexts
PERCPU: Embedded 8 pages/cpu @c126b000 s10048 r8192 d14528 u32768
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260608
Kernel command line: root=/dev/mmcblk0p1 rootdelay=1 ro console=ttyS0,115200 maxcpus=1
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Sorting __ex_table...
Memory: 909460K/1048576K available (7172K kernel code, 356K rwdata, 2028K rodata, 300K init, 756K bss, 139116K reserved, 262136K highmem)
Kernel virtual memory layout:
  * 0xfff5f000..0xfffff000  : fixmap
  * 0xffc00000..0xffe00000  : highmem PTEs
  * 0xffbfa000..0xffc00000  : early ioremap
  * 0xf1000000..0xffbfa000  : vmalloc & ioremap
Hierarchical RCU implementation.
        RCU debugfs-based tracing is enabled.
        RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
NR_IRQS:512 nr_irqs:512 16
mpic: Setting up MPIC " OpenPIC  " version 1.2 at ffe040000, max 2 CPUs
mpic: ISU size: 512, shift: 9, mask: 1ff
mpic: Initializing for 512 sources
clocksource: timebase mult[28000000] shift[24] registered
Console: colour dummy device 80x25
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
mpic: requesting IPIs...
e500 family performance monitor hardware support registered
Brought up 1 CPUs
devtmpfs: initialized
NET: Registered protocol family 16

Found FSL PCI host bridge at 0x0000000ffe240000. Firmware bus number: 0->1
PCI host bridge /pcie@ffe240000  ranges:
 MEM 0x0000000c00000000..0x0000000c0fffffff -> 0x00000000e0000000
  IO 0x0000000ff8000000..0x0000000ff800ffff -> 0x0000000000000000
/pcie@ffe240000: PCICSRBAR @ 0xff000000
EDAC PCI0: Giving out device to module 'MPC85xx_edac' controller 'mpc85xx_pci_err': DEV 'ffe240000.pcie' (INTERRUPT)
MPC85xx_edac acquired irq 20 for PCI Err
MPC85xx_edac PCI err registered
Found FSL PCI host bridge at 0x0000000ffe250000. Firmware bus number: 0->1
PCI host bridge /pcie@ffe250000  ranges:
 MEM 0x0000000c10000000..0x0000000c1fffffff -> 0x00000000e0000000
  IO 0x0000000ff8010000..0x0000000ff801ffff -> 0x0000000000000000
/pcie@ffe250000: PCICSRBAR @ 0xff000000
EDAC PCI1: Giving out device to module 'MPC85xx_edac' controller 'mpc85xx_pci_err': DEV 'ffe250000.pcie' (INTERRUPT)
MPC85xx_edac acquired irq 21 for PCI Err
MPC85xx_edac PCI err registered
Found FSL PCI host bridge at 0x0000000ffe260000. Firmware bus number: 0->1
PCI host bridge /pcie@ffe260000  ranges:
 MEM 0x0000000c20000000..0x0000000c2fffffff -> 0x00000000e0000000
  IO 0x0000000ff8020000..0x0000000ff802ffff -> 0x0000000000000000
/pcie@ffe260000: PCICSRBAR @ 0xff000000
EDAC PCI2: Giving out device to module 'MPC85xx_edac' controller 'mpc85xx_pci_err': DEV 'ffe260000.pcie' (INTERRUPT)
MPC85xx_edac acquired irq 22 for PCI Err
MPC85xx_edac PCI err registered
PCI: Probing PCI hardware
fsl-pci ffe240000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0xf1040000-0xf104ffff] (bus address [0x0000-0xffff])
pci_bus 0000:00: root bus resource [mem 0xc00000000-0xc0fffffff] (bus address [0xe0000000-0xefffffff])
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: ignoring class 0x0b2000 (doesn't match header type 01)
pci 0000:00:00.0: PCI bridge to [bus 01-ff]
fsl-pci ffe250000.pcie: PCI host bridge to bus 0001:02
pci_bus 0001:02: root bus resource [io  0xf10a0000-0xf10affff] (bus address [0x0000-0xffff])
pci_bus 0001:02: root bus resource [mem 0xc10000000-0xc1fffffff] (bus address [0xe0000000-0xefffffff])
pci_bus 0001:02: root bus resource [bus 02-ff]
pci 0001:02:00.0: ignoring class 0x0b2000 (doesn't match header type 01)
pci 0001:02:00.0: Primary bus is hard wired to 0
pci 0001:02:00.0: bridge configuration invalid ([bus 01-01]), reconfiguring
pci 0001:02:00.0: PCI bridge to [bus 03-ff]
fsl-pci ffe260000.pcie: PCI host bridge to bus 0002:04
pci_bus 0002:04: root bus resource [io  0xf1100000-0xf110ffff] (bus address [0x0000-0xffff])
pci_bus 0002:04: root bus resource [mem 0xc20000000-0xc2fffffff] (bus address [0xe0000000-0xefffffff])
pci_bus 0002:04: root bus resource [bus 04-ff]
pci 0002:04:00.0: ignoring class 0x0b2000 (doesn't match header type 01)
pci 0002:04:00.0: Primary bus is hard wired to 0
pci 0002:04:00.0: bridge configuration invalid ([bus 01-01]), reconfiguring
pci 0002:04:00.0: PCI bridge to [bus 05-ff]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0:   bridge window [io  0xf1040000-0xf104ffff]
pci 0000:00:00.0:   bridge window [mem 0xc00000000-0xc0fffffff]
pci 0001:02:00.0: PCI bridge to [bus 03]
pci 0001:02:00.0:   bridge window [io  0xf10a0000-0xf10affff]
pci 0001:02:00.0:   bridge window [mem 0xc10000000-0xc1fffffff]
pci 0002:04:00.0: BAR 9: can't assign mem pref (size 0x100000)
pci 0002:05:00.0: BAR 6: assigned [mem 0xc20200000-0xc2020ffff pref]
pci 0002:04:00.0: PCI bridge to [bus 05]
pci 0002:04:00.0:   bridge window [io  0xf1100000-0xf110ffff]
pci 0002:04:00.0:   bridge window [mem 0xc20000000-0xc2fffffff]
pci_bus 0002:04: Some PCI device resources are unassigned, try booting with pci=realloc
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Bman err interrupt handler present
Bman portal initialised, cpu 0
Bman portal initialised, cpu 1
Bman portals initialised
Qman err interrupt handler present
Qman portal initialised, cpu 0
Qman portal initialised, cpu 1
Qman portals initialised
Bman: BPID allocator includes range 32:32
Qman: FQID allocator includes range 256:512
Qman: FQID allocator includes range 32768:32768
Qman: CGRID allocator includes range 0:256
Qman: pool channel allocator includes range 1025:15
fsl-ifc ffe124000.localbus: Freescale Integrated Flash Controller
Switched to clocksource timebase
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
audit: initializing netlink socket (disabled)
type=2000 audit(0.372:1): initialized
bounce pool size: 64 pages
HugeTLB registered 1 MB page size, pre-allocated 0 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
HugeTLB registered 16 MB page size, pre-allocated 0 pages
HugeTLB registered 64 MB page size, pre-allocated 0 pages
HugeTLB registered 256 MB page size, pre-allocated 0 pages
HugeTLB registered 1 GB page size, pre-allocated 0 pages
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
NTFS driver 2.1.30 [Flags: R/O].
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 1393
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250.0: ttyS0 at MMIO 0xffe11c500 (irq = 36, base_baud = 12500000) is a 16550A_FSL64
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0xffe11c600 (irq = 36, base_baud = 12500000) is a 16550A_FSL64
serial8250.0: ttyS2 at MMIO 0xffe11d500 (irq = 37, base_baud = 12500000) is a 16550A_FSL64
serial8250.0: ttyS3 at MMIO 0xffe11d600 (irq = 37, base_baud = 12500000) is a 16550A_FSL64
ePAPR hypervisor byte channel driver
Generic non-volatile memory driver v1.1
brd: module loaded
loop: module loaded
st: Version 20101219, fixed bufsize 32768, s/g segs 256
fsl-sata ffe220000.sata: Sata FSL Platform/CSB Driver init
scsi0 : sata_fsl
ata1: SATA max UDMA/133 irq 68
No NAND device found
fsl_espi ffe110000.spi: master is unqueued, this is deprecated
m25p80 spi32766.0: found s25fl256s1, expected s25fl512s
m25p80 spi32766.0: s25fl256s1 (32768 Kbytes)
12 ofpart partitions found on MTD device spi32766.0
Creating 12 MTD partitions on "spi32766.0":
0x000000000000-0x000000100000 : "u-boot"
0x000000100000-0x000000110000 : "u-boot-env"
0x000000110000-0x000000140000 : "frame-mgr"
0x000000140000-0x000000d40000 : "Kernel A"
0x000000d40000-0x000001940000 : "Kernel B"
0x000001940000-0x000001950000 : "DTB A"
0x000001950000-0x000001960000 : "DTB B"
0x000001960000-0x000001f00000 : "Kdump"
mtdoops: Attached to MTD device 7
0x000001f00000-0x000001f80000 : "Cert"
0x000001f80000-0x000001fc0000 : "SENAO"
0x000001fc0000-0x000002000000 : "ART"
0x000000000000-0x000002000000 : "spiNOR"
fsl_espi ffe110000.spi: at 0xf10fe000 (irq = 53)
JBM HERE fsl_espi_probe909
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
libphy: Freescale XGMAC MDIO Bus: probed
libphy: Freescale XGMAC MDIO Bus: probed
libphy: Freescale XGMAC MDIO Bus: probed
libphy: Freescale XGMAC MDIO Bus: probed
libphy: Freescale XGMAC MDIO Bus: probed
libphy: Freescale XGMAC MDIO Bus: probed
cpu0/0: > WARNING (FM) [CPU00, /home/buildagent/jenkins/workspace/packages/linux_sdk_freescale_yocto/linux_sdk_freescale_yocto__main/build_bsap3040/tmp/work-shared/bsap3040/kernel-source/drivers/net/ethernet/freescale/fman/Peripherals/FM/fm.c:3543 FM_Init]:
cpu0/0: Hack: No FM reset!
cpu0/0:
Freescale FM module (Mar 20 2018:15:09:50), FMD API version 21.1.0
Freescale FM Ports module (Mar 20 2018:15:09:51)
fsl_mac: fsl_mac: FSL FMan MAC API based driver ()
fsl_mac ffe4e0000.ethernet: FMan MEMAC
fsl_mac ffe4e0000.ethernet: FMan MAC address: 00:19:92:xx:xx:xx
fsl_mac ffe4e6000.ethernet: FMan MEMAC
fsl_mac ffe4e6000.ethernet: FMan MAC address: 00:19:92:xx:xx:xx
fsl_dpa: FSL DPAA Ethernet driver ()
fsl_dpa: FSL DPAA Ethernet debugfs entries ()
fsl_dpa: fsl_dpa: Probed interface eth0
fsl_dpa: fsl_dpa: Probed interface eth1
fsl_advanced: FSL DPAA Advanced drivers: ()
fsl_proxy: FSL DPAA Proxy initialization driver ()
fsl_dpa_shared: FSL DPAA Shared Ethernet driver ()
fsl_dpa_macless: FSL DPAA MACless Ethernet driver ()
fsl_oh: FSL FMan Offline Parsing port driver ()
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
/soc@ffe000000/usb@210000: Invalid 'dr_mode' property, fallback to host mode
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.0: irq 44, io mem 0xffe210000
fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
fsl-ehci: USB PHY clock invalid
fsl-ehci fsl-ehci.1: can't setup: -22
fsl-ehci fsl-ehci.1: USB bus 2 deregistered
fsl-ehci fsl-ehci.1: init fsl-ehci.1 fail, -22
fsl-ehci: probe of fsl-ehci.1 failed with error -22
ata1: No Device OR PHYRDY change,Hstatus = 0x80000000
ata1: SATA link down (SStatus 10 SControl 300)
usbcore: registered new interface driver usb-storage
i2c /dev entries driver
mpc-i2c ffe118000.i2c: timeout 1000000 us
rtc-s35390a 0-0030: rtc core: registered rtc-s35390a as rtc0
mpc-i2c ffe118100.i2c: timeout 1000000 us
mpc-i2c ffe119000.i2c: timeout 1000000 us
mpc-i2c ffe119100.i2c: timeout 1000000 us
ina2xx 1-0040: power monitor ina220 (Rshunt = 1000 uOhm)
ina2xx 1-0041: power monitor ina220 (Rshunt = 1000 uOhm)
booke_wdt: powerpc book-e watchdog driver loaded
Freescale(R) MPC85xx EDAC driver, (C) 2006 Montavista Software
mpc85xx_mc_err_probe: No ECC DIMMs discovered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
/soc@ffe000000/sdhc@114000: voltage-ranges unspecified
mmc0: SDHCI controller on ffe114000.sdhc [ffe114000.sdhc] using ADMA
platform caam_qi.0: Linux CAAM Queue I/F driver initialised
caam ffe300000.crypto: Entropy delay = 3200
caam ffe300000.crypto: Instantiated RNG4 SH0
caam ffe300000.crypto: Instantiated RNG4 SH1
caam ffe300000.crypto: device ID = 0x0a12050000000000 (Era 8)
caam ffe300000.crypto: job rings = 4, qi = 1
caam algorithms registered in /proc/crypto
platform caam_qi.0: fsl,sec-v5.0 algorithms registered in /proc/crypto
caam_jr ffe301000.jr: registering rng-caam
caam ffe300000.crypto: fsl,sec-v5.0 algorithms registered in /proc/crypto
Freescale USDPAA process driver
fsl-usdpaa: no region found
Freescale USDPAA process IRQ driver
Freescale pme2 db driver
PME2: fsl_pme2_db_init: not on ctrl-plane
Freescale pme2 scan driver
fsl-pme2-scan: device pme_scan registered
Freescale hypervisor management driver
fsl-hv: no hypervisor found
Netfilter messages via NETLINK v0.30.
nfnl_acct: registering with nfnetlink.
nf_conntrack version 0.5.0 (15240 buckets, 60960 max)
ctnetlink v0.93: registering with nfnetlink.
ipip: IPv4 over IPv4 tunneling driver
gre: GRE over IPv4 demultiplexor driver
ip_gre: GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
mmc_read_ext_csd card->ext_csd.rev =7 EXT_CSD_REV=c0
mmc_read_ext_csdcard->ext_csd.raw_sectors[0]= 0
mmc_read_ext_csdcard->ext_csd.raw_sectors[1]= 0
mmc_read_ext_csdcard->ext_csd.raw_sectors[2]= 72
mmc_read_ext_csdcard->ext_csd.raw_sectors[3]= 0
mmc_read_ext_csd card->ext_csd.sectors  720000
mmc_select_card_type card->ext_csd.raw_card_type= 57, card_type=17, caps=4000042f
mmc0: BKOPS_EN bit is not set
NET: Registered protocol family 17
NET: Registered protocol family 15
8021q: 802.1Q VLAN Support v1.8
Key type dns_resolver registered
fsl_generic: FSL DPAA Generic Ethernet driver ()
fsl_generic: FSL DPAA Ethernet debugfs entries ()
rtc-s35390a 0-0030: setting system clock to 2019-06-28 16:28:57 UTC (1561739337)
Waiting 1 sec before mounting root device...
mmc0: new high speed MMC card at address 0001
mmcblk0: mmc0:0001 M62704 3.56 GiB
mmcblk0boot0: mmc0:0001 M62704 partition 1 2.00 MiB
mmcblk0boot1: mmc0:0001 M62704 partition 2 2.00 MiB
mmcblk0rpmb: mmc0:0001 M62704 partition 3 512 KiB
 mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
 mmcblk0boot1: unknown partition table
 mmcblk0boot0: unknown partition table
VFS: Mounted root (ext2 filesystem) readonly on device 179:1.
devtmpfs: mounted
Freeing unused kernel memory: 300K (c0900000 - c094b000)
INIT: version 2.88 booting
/etc/init.d/rcS: line 31: /etc/hostname: Read-only file system
Checking EXT2 filesystems...
e2fsck 1.42.9 (28-Dec-2013)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
rootfs/dev/mmcbl: 2378/62744 files (0.9% non-contiguous), 87408/250040 blocks
e2fsck /dev/mmcblk0p1 returned 0
e2fsck 1.42.9 (28-Dec-2013)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
rootfs/dev/mmcbl: 2385/62744 files (1.3% non-contiguous), 87306/250048 blocks
e2fsck /dev/mmcblk0p2 returned 0
e2fsck 1.42.9 (28-Dec-2013)
home: clean, 12/64384 files, 4055/257046 blocks
e2fsck 1.42.9 (28-Dec-2013)
log: clean, 17/64384 files, 4127/257046 blocks
e2fsck 1.42.9 (28-Dec-2013)
var: clean, 33/64384 files, 4070/257046 blocks
Starting udev
udevd[1018]: starting version 182
adf: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, WRITE_EEPROM, 11D)
ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
ath_spectral: Version 2.0.0
Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved
SPECTRAL module built on Apr 17 2018 03:16:45
ath_tx99: Version 2.0
Copyright (c) 2010 Atheros Communications, Inc, All Rights Reserved
ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
ath_dfs: Version 2.0.0
Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
ath_pci: 10.4-AA-CS-0.0.2217.065 (Atheros/multi-bss)
ol_ath_pci_probe: PCI device id 0046 :0046
ath_pci 0000:01:00.0: BAR 0: assigned [mem 0xc00000000-0xc001fffff 64bit]
 *********** Cascade *************
ath: Target is in an unknown state. Resetting (attempt 1).
Reset Device
ol_ath_pci_probe: HIF PCI Free needs to happen here
ath reprobe.
ol_ath_pci_probe: PCI device id 0046 :0046
ath_pci 0000:01:00.0: BAR 0: assigned [mem 0xc00000000-0xc001fffff 64bit]
 *********** Cascade *************

__ol_ath_attach() Allocated scn c6f80480
ath_pci 0000:01:00.0: ath DEBUG: sc=0xc59d5000

 ol_ath_pci_configure : num_desired MSI set to 0

 Using PCI Legacy Interrupt
chip_id 0xa chip_revision 0x0

 CLOCK PLL skipped
__ol_ath_attach: dev name wifi0
ol_ath_attach() BMI inited.
ol_ath_attach() BMI Get Target Info.
Chip id: 0xa, chip version: 0x1000000

 CE WAR Disabled
NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
ol_ath_attach() configure Target .
ol_ath_download_firmware: Download OTP, flash download ADDRESS 0x0

 Selecting  OTP binary for CHIP Version 0
ol_transfer_bin_file 3898: downloading file 0, Download data len 8920

 First OTP send param 10
ol_ath_download_firmware :First OTP download and Execute is good address:0x0 return param 4660
ol_ath_download_firmware:##Board Id 0 , CHIP Id 0
ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000

 wifi0: Selecting board data file name boarddata_0.bin
ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=QCA9984/hw.1/boarddata_0.bin
ol_transfer_bin_file 3898: downloading file 3, Download data len 12064
Board extended Data download address: 0x0
ol_ath_download_firmware: Using 0x1234 for the remainder of init

 Selecting  OTP binary for CHIP Version 0
ol_transfer_bin_file 3898: downloading file 0, Download data len 8920

 [Non-Flash] : Ignore Module param

 Second otp download Param 700
ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0

 Mission mode: Firmware CHIP Version 0
ol_swap_seg_alloc: Successfully allocated memory for SWAP size=262144
Swap: bytes_left to copy: fw:16; dma_page:53768
Swap: wrong length read:0
ol_swap_wlan_memory_expansion: Swap total_bytes copied: 208376 Target address 41be68
scn=c6f80480  target_write_addr=41be68 seg_info=c68f9dd0
ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2
bin_filename=QCA9984/hw.1/athwlan.bin swap_filename=/lib/firmware/QCA9984/hw.1/athwlan.codeswap.bin
ol_transfer_bin_file: Downloading firmware file: QCA9984/hw.1/athwlan.bin
ol_transfer_bin_file 3898: downloading file 1, Download data len 364176
ol_ath_attach() Download FW done.
ol_ath_attach() HT Create .
ol_ath_attach() HIF Claim.
ol_ath_attach() BMI Done.
ol_ath_attach 7321 host_enable 0 nss_nwifi_offload 0
ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
 OL_ACBKMinfree : 0
 OL_ACBEMinfree : 0
 OL_ACVIMinfree : 0
 OL_ACVOMinfree : 0
ol_ath_attach() WMI attached. wmi_handle c50f0000
CE_recv_buf_enqueue 844 Populate last entry 512 for CE 5
CE_recv_buf_enqueue 853 CE 5 wi 511 dest_ptr 0x5217bc0 nbytes 0 recv_ctxt 0xc5072b00
Startup Mode-0 set

<=== cfg max peer id 1056 ====>
HTC Service:0x0300 ep:1 TX flow control disabled
htt_peer_map_timer_init Enter pdev c5268000 hrtimer c526c8a0

 htt_alloc_peer_map_mem : Alloc Success : host q vaddr c5532000 paddr 5532000

 htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
CE_pkt_dl_len_set CE 4 Pkt download length 64
ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from c5540000
HTC Service:0x0100 ep:2 TX flow control disabled
wmi_service_ready_event_rx:  WMI UNIFIED SERVICE READY event
Firmware_Build_Number:9999
host/RAM_fw Build Ver Mismatch: H:0x48, F:0x270F !
num_rf_chain:0x00000004  ht_cap_info:0x0000085b  vht_cap_info:0x339b79f2  vht_supp_mcs:0x0000ffea

 RES CFG Support wmi_service_bitmap 9778

 Sending Ext resource cfg: HOST PLATFORM as 0 and fw_feature_bitmap as 10 to TGT
ol_ath_service_ready_event: tt_support: 1
Peer Caching Enabled ; num_peers = 530, num_active_peers = 52 num_tids = 104, num_vdevs = 17
idx 1 req 2  num_units 1 num_unit_info 12 unit size 256 actual units 53
ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256,
idx 2 req 3  num_units 1 num_unit_info 12 unit size 1024 actual units 53
ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024,
idx 3 req 4  num_units 1 num_unit_info 12 unit size 4096 actual units 53
ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096,
idx 0 req 1  num_units 0 num_unit_info 2 unit size 1456 actual units 531
ol_ath_alloc_host_mem_chunk req_id 1 idx 3 num_units 177 unit_len 1456,
ol_ath_alloc_host_mem_chunk req_id 1 idx 4 num_units 177 unit_len 1456,
ol_ath_alloc_host_mem_chunk req_id 1 idx 5 num_units 177 unit_len 1456,
idx 4 req 6  num_units 35 num_unit_info 0 unit size 3072 actual units 35
ol_ath_alloc_host_mem_chunk req_id 6 idx 6 num_units 35 unit_len 3072,
idx 5 req 7  num_units 1 num_unit_info 0 unit size 12288 actual units 1
ol_ath_alloc_host_mem_chunk req_id 7 idx 7 num_units 1 unit_len 12288,
idx 6 req 5  num_units 0 num_unit_info 2 unit size 1876 actual units 531
ol_ath_alloc_host_mem_chunk req_id 5 idx 8 num_units 132 unit_len 1876,
ol_ath_alloc_host_mem_chunk req_id 5 idx 9 num_units 133 unit_len 1876,
ol_ath_alloc_host_mem_chunk req_id 5 idx 10 num_units 133 unit_len 1876,
ol_ath_alloc_host_mem_chunk req_id 5 idx 11 num_units 133 unit_len 1876,
chunk 0 len 13568 requested ,ptr  0x5534000
chunk 1 len 54272 requested ,ptr  0x55a0000
chunk 2 len 217088 requested ,ptr  0x55c0000
chunk 3 len 257712 requested ,ptr  0x5600000
chunk 4 len 257712 requested ,ptr  0x5640000
chunk 5 len 257712 requested ,ptr  0x5680000
chunk 6 len 107520 requested ,ptr  0x56c0000
chunk 7 len 12288 requested ,ptr  0x5538000
chunk 8 len 247632 requested ,ptr  0x5700000
chunk 9 len 249508 requested ,ptr  0x5740000
chunk 10 len 249508 requested ,ptr  0x5780000
chunk 11 len 249508 requested ,ptr  0x57c0000
ol_ath_service_ready_event[3903] WAPI MBSSID 2
wmi_ready_event_rx:  WMI UNIFIED READY event
ol_ath_connect_htc() WMI is ready
target uses HTT version 2.2; host uses 2.2
ol_ath_attach() connect HTC.
bypasswmi : 0
ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
ol_regdmn_start  countrycode 840
isCountryCodeValid: EEPROM regdomain 0x0
ol_regdmn_init_channels: !avail mode 0x680c (0x2) flags 0x2150
ol_regdmn_init_channels: !avail mode 0x680c (0x1) flags 0x140
ol_regdmn_init_channels: !avail mode 0x680c (0x20) flags 0xd0
ol_regdmn_init_channels: !avail mode 0x680c (0x40) flags 0x150
ol_regdmn_init_channels: !avail mode 0x680c (0x1000) flags 0x10100
ol_regdmn_init_channels: !avail mode 0x680c (0x8000) flags 0x20100
ol_regdmn_init_channels: !avail mode 0x680c (0x10000) flags 0x40100
ol_regdmn_init_channels: !avail mode 0x680c (0x20000) flags 0x100100
ol_regdmn_init_channels: !avail mode 0x680c (0x40000) flags 0x200100
ol_regdmn_init_channels: !avail mode 0x680c (0x80000) flags 0x400100
ol_regdmn_init_channels: !avail mode 0x680c (0x100000) flags 0x800100
ol_regdmn_init_channels: !avail mode 0x680c (0x200000) flags 0x4000100
ol_regdmn_init_channels: !avail mode 0x680c (0x400000) flags 0x8000100
OL Resmgr Init-ed
ieee80211_bsteering_attach: Band steering initialized
acfg_attach: 6050: Netlink socket created:c59d2000
SPECTRAL : get_capability not registered
HAL_CAP_PHYDIAG : Capable
SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237)
SPECTRAL : get_capability not registered
HAL_CAP_RADAR   : Capable
SPECTRAL : Need to fix the capablity check for SPECTRAL
 (spectral_attach : 242)
SPECTRAL : get_capability not registered
HAL_CAP_SPECTRAL_SCAN : Capable
SPECTRAL : get_tsf64 not registered
spectral_init_netlink 78 NULL SKB
Green-AP : Green-AP : Attached

Green-AP : Attached
rate power table override is only supported for AR98XX
ol_ath_smart_ant_attach: Firmware doest not support Smart Antenna.
ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna.
ieee80211com_init_netlink: 3408: Wifipos 1st Netlink socket created:c59d1000
ol_if_dfs_attach: called; ptr=c55b9984, radar_info=c5983b28
dfs_attach: event log enabled by default
ol_ath_attach() UMAC attach .
ol_if_dfs_configure: FCC domain
ol_ath_attach: Calling ol_if_dfs_configure

 BURSTING enabled by default
ol_ath_attach: Set global_ic[1] ..ptr:f2643c90
osif_wrap_attach:434 osif wrap attached
osif_wrap_devt_init:395 osif wrap dev table init done
 Wrap Attached: Wrap_com =c68f3800 ic->ic_wrap_com=c68f3800 &wrap_com->wc_devt=c68f3800
__ol_ath_attach: needed_headroom reservation 60
ol_ath_thermal_mitigation_attach: --
ol_ath_pci_probe: PCI device id 0046 :0046
ath_pci 0001:03:00.0: BAR 0: assigned [mem 0xc10000000-0xc101fffff 64bit]
 *********** Cascade *************
ath: Target is in an unknown state. Resetting (attempt 1).
Reset Device
ol_ath_pci_probe: HIF PCI Free needs to happen here
ath reprobe.
ol_ath_pci_probe: PCI device id 0046 :0046
ath_pci 0001:03:00.0: BAR 0: assigned [mem 0xc10000000-0xc101fffff 64bit]
 *********** Cascade *************

__ol_ath_attach() Allocated scn c40c0480
ath_pci 0001:03:00.0: ath DEBUG: sc=0xc59d0800

 ol_ath_pci_configure : num_desired MSI set to 0

 Using PCI Legacy Interrupt
chip_id 0xa chip_revision 0x0

 CLOCK PLL skipped
__ol_ath_attach: dev name wifi1
ol_ath_attach() BMI inited.
ol_ath_attach() BMI Get Target Info.
Chip id: 0xa, chip version: 0x1000000

 CE WAR Disabled
NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
ol_ath_attach() configure Target .
ol_ath_download_firmware: Download OTP, flash download ADDRESS 0x0

 Selecting  OTP binary for CHIP Version 0
ol_transfer_bin_file 3898: downloading file 0, Download data len 8920

 First OTP send param 10
ol_ath_download_firmware :First OTP download and Execute is good address:0x0 return param 4660
ol_ath_download_firmware:##Board Id 0 , CHIP Id 0
ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000

 wifi1: Selecting board data file name boarddata_1.bin
ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=QCA9984/hw.1/boarddata_1.bin
ol_transfer_bin_file 3898: downloading file 3, Download data len 12064
Board extended Data download address: 0x0
ol_ath_download_firmware: Using 0x1234 for the remainder of init

 Selecting  OTP binary for CHIP Version 0
ol_transfer_bin_file 3898: downloading file 0, Download data len 8920

 [Non-Flash] : Ignore Module param

 Second otp download Param 700
ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0

 Mission mode: Firmware CHIP Version 0
[wifi0] FWLOG: [2153] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 )
[wifi0] FWLOG: [2153] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 )
[wifi0] FWLOG: [2153] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )
[wifi0] FWLOG: [2153] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )
ol_swap_seg_alloc: Successfully allocated memory for SWAP size=262144
Swap: bytes_left to copy: fw:16; dma_page:53768
Swap: wrong length read:0
ol_swap_wlan_memory_expansion: Swap total_bytes copied: 208376 Target address 41be68
scn=c40c0480  target_write_addr=41be68 seg_info=c5941290
ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2
bin_filename=QCA9984/hw.1/athwlan.bin swap_filename=/lib/firmware/QCA9984/hw.1/athwlan.codeswap.bin
ol_transfer_bin_file: Downloading firmware file: QCA9984/hw.1/athwlan.bin
ol_transfer_bin_file 3898: downloading file 1, Download data len 364176
ol_ath_attach() Download FW done.
ol_ath_attach() HT Create .
ol_ath_attach() HIF Claim.
ol_ath_attach() BMI Done.
ol_ath_attach 7321 host_enable 0 nss_nwifi_offload 0
ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
 OL_ACBKMinfree : 0
 OL_ACBEMinfree : 0
 OL_ACVIMinfree : 0
 OL_ACVOMinfree : 0
ol_ath_attach() WMI attached. wmi_handle c41e0000
CE_recv_buf_enqueue 844 Populate last entry 512 for CE 5
CE_recv_buf_enqueue 853 CE 5 wi 511 dest_ptr 0x430b100 nbytes 0 recv_ctxt 0xc41b4480
Startup Mode-0 set

<=== cfg max peer id 1056 ====>
HTC Service:0x0300 ep:1 TX flow control disabled
htt_peer_map_timer_init Enter pdev c4360000 hrtimer c43648a0

 htt_alloc_peer_map_mem : Alloc Success : host q vaddr c4584000 paddr 4584000

 htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
CE_pkt_dl_len_set CE 4 Pkt download length 64
ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from c4620000
HTC Service:0x0100 ep:2 TX flow control disabled
wmi_service_ready_event_rx:  WMI UNIFIED SERVICE READY event
Firmware_Build_Number:9999
host/RAM_fw Build Ver Mismatch: H:0x48, F:0x270F !
num_rf_chain:0x00000004  ht_cap_info:0x0000085b  vht_cap_info:0x339b79f2  vht_supp_mcs:0x0000ffea

 RES CFG Support wmi_service_bitmap 9778

 Sending Ext resource cfg: HOST PLATFORM as 0 and fw_feature_bitmap as 10 to TGT
ol_ath_service_ready_event: tt_support: 1
Peer Caching Enabled ; num_peers = 530, num_active_peers = 52 num_tids = 104, num_vdevs = 17
idx 1 req 2  num_units 1 num_unit_info 12 unit size 256 actual units 53
ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256,
idx 2 req 3  num_units 1 num_unit_info 12 unit size 1024 actual units 53
ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024,
idx 3 req 4  num_units 1 num_unit_info 12 unit size 4096 actual units 53
ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096,
idx 0 req 1  num_units 0 num_unit_info 2 unit size 1456 actual units 531
ol_ath_alloc_host_mem_chunk req_id 1 idx 3 num_units 177 unit_len 1456,
ol_ath_alloc_host_mem_chunk req_id 1 idx 4 num_units 177 unit_len 1456,
ol_ath_alloc_host_mem_chunk req_id 1 idx 5 num_units 177 unit_len 1456,
idx 4 req 6  num_units 35 num_unit_info 0 unit size 3072 actual units 35
ol_ath_alloc_host_mem_chunk req_id 6 idx 6 num_units 35 unit_len 3072,
idx 5 req 7  num_units 1 num_unit_info 0 unit size 12288 actual units 1
ol_ath_alloc_host_mem_chunk req_id 7 idx 7 num_units 1 unit_len 12288,
idx 6 req 5  num_units 0 num_unit_info 2 unit size 1876 actual units 531
ol_ath_alloc_host_mem_chunk req_id 5 idx 8 num_units 132 unit_len 1876,
ol_ath_alloc_host_mem_chunk req_id 5 idx 9 num_units 133 unit_len 1876,
ol_ath_alloc_host_mem_chunk req_id 5 idx 10 num_units 133 unit_len 1876,
ol_ath_alloc_host_mem_chunk req_id 5 idx 11 num_units 133 unit_len 1876,
chunk 0 len 13568 requested ,ptr  0x4688000
chunk 1 len 54272 requested ,ptr  0x4690000
chunk 2 len 217088 requested ,ptr  0x46c0000
chunk 3 len 257712 requested ,ptr  0x4700000
chunk 4 len 257712 requested ,ptr  0x4740000
chunk 5 len 257712 requested ,ptr  0x4780000
chunk 6 len 107520 requested ,ptr  0x46a0000
chunk 7 len 12288 requested ,ptr  0x468c000
chunk 8 len 247632 requested ,ptr  0x47c0000
chunk 9 len 249508 requested ,ptr  0x4800000
chunk 10 len 249508 requested ,ptr  0x4840000
chunk 11 len 249508 requested ,ptr  0x4880000
ol_ath_service_ready_event[3903] WAPI MBSSID 2
wmi_ready_event_rx:  WMI UNIFIED READY event
ol_ath_connect_htc() WMI is ready
target uses HTT version 2.2; host uses 2.2
ol_ath_attach() connect HTC.
bypasswmi : 0
ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
ol_regdmn_start  countrycode 840
isCountryCodeValid: EEPROM regdomain 0x0
ol_regdmn_init_channels: !avail mode 0x7f9001 (0x2) flags 0x2150
ol_regdmn_init_channels: !avail mode 0x7f9001 (0x4) flags 0xa0
ol_regdmn_init_channels: !avail mode 0x7f9001 (0x8) flags 0xc0
ol_regdmn_init_channels: !avail mode 0x7f9001 (0x20) flags 0xd0
ol_regdmn_init_channels: !avail mode 0x7f9001 (0x40) flags 0x150
ol_regdmn_init_channels: !avail mode 0x7f9001 (0x800) flags 0x10080
ol_regdmn_init_channels: !avail mode 0x7f9001 (0x2000) flags 0x20080
ol_regdmn_init_channels: !avail mode 0x7f9001 (0x4000) flags 0x40080
Add VHT80 channel: 5210
Add VHT80 channel: 5290
Add VHT80 channel: 5530
Add VHT80 channel: 5610
Add VHT80 channel: 5690
Add VHT80 channel: 5775
Skipping VHT80 channel 5825
Add VHT80_80 channels: 5210 : 5290
Add VHT80_80 channels: 5290 : 5210
Add VHT80_80 channels: 5530 : 5610
Add VHT80_80 channels: 5610 : 5530
Add VHT80_80 channels: 5210 : 5530
Add VHT80_80 channels: 5530 : 5210
Add VHT80_80 channels: 5210 : 5610
Add VHT80_80 channels: 5610 : 5210
Add VHT80_80 channels: 5210 : 5690
Add VHT80_80 channels: 5690 : 5210
Add VHT80_80 channels: 5210 : 5775
Add VHT80_80 channels: 5775 : 5210
Add VHT80_80 channels: 5290 : 5530
Add VHT80_80 channels: 5530 : 5290
Add VHT80_80 channels: 5290 : 5610
Add VHT80_80 channels: 5610 : 5290
Add VHT80_80 channels: 5290 : 5690
Add VHT80_80 channels: 5690 : 5290
Add VHT80_80 channels: 5290 : 5775
Add VHT80_80 channels: 5775 : 5290
Add VHT80_80 channels: 5530 : 5690
Add VHT80_80 channels: 5690 : 5530
Add VHT80_80 channels: 5530 : 5775
Add VHT80_80 channels: 5775 : 5530
Add VHT80_80 channels: 5610 : 5775
Add VHT80_80 channels: 5775 : 5610
Add VHT80_80 channels: 5690 : 5775
Add VHT80_80 channels: 5775 : 5690
OL Resmgr Init-ed
ieee80211_bsteering_attach: Band steering initialized
acfg_attach: Offload using existing sock c59d2000
SPECTRAL : get_capability not registered
HAL_CAP_PHYDIAG : Capable
SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237)
SPECTRAL : get_capability not registered
HAL_CAP_RADAR   : Capable
SPECTRAL : Need to fix the capablity check for SPECTRAL
 (spectral_attach : 242)
SPECTRAL : get_capability not registered
HAL_CAP_SPECTRAL_SCAN : Capable
SPECTRAL : get_tsf64 not registered
spectral_init_netlink 78 NULL SKB
Green-AP : Green-AP : Attached

Green-AP : Attached
rate power table override is only supported for AR98XX
ol_ath_smart_ant_attach: Firmware doest not support Smart Antenna.
ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna.
ieee80211com_init_netlink: Socket already created c59d1000
ol_if_dfs_attach: called; ptr=c48c9984, radar_info=c5983b28
dfs_attach: event log enabled by default
ol_ath_attach() UMAC attach .
ol_if_dfs_configure: FCC domain
ol_ath_attach: Calling ol_if_dfs_configure

 BURSTING enabled by default
ol_ath_attach: Set global_ic[2] ..ptr:f2643c90
osif_wrap_attach:434 osif wrap attached
osif_wrap_devt_init:395 osif wrap dev table init done
 Wrap Attached: Wrap_com =c68f3e00 ic->ic_wrap_com=c68f3e00 &wrap_com->wc_devt=c68f3e00
__ol_ath_attach: needed_headroom reservation 60
ol_ath_thermal_mitigation_attach: --
ol_ath_pci_probe: PCI device id 0050 :0050
ath_pci 0002:05:00.0: BAR 0: assigned [mem 0xc20000000-0xc201fffff 64bit]
 *********** Peregrine **************
ath: Target is in an unknown state. Resetting (attempt 1).
Reset Device
ol_ath_pci_probe: HIF PCI Free needs to happen here
ath reprobe.
ol_ath_pci_probe: PCI device id 0050 :0050
ath_pci 0002:05:00.0: BAR 0: assigned [mem 0xc20000000-0xc201fffff 64bit]
 *********** Peregrine **************

__ol_ath_attach() Allocated scn c49c0480
ath_pci 0002:05:00.0: ath DEBUG: sc=0xc59cec00

 ol_ath_pci_configure : num_desired MSI set to 0

 Using PCI Legacy Interrupt
[wifi1] FWLOG: [2032] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 )
[wifi1] FWLOG: [2032] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 )
[wifi1] FWLOG: [2032] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )
[wifi1] FWLOG: [2032] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )
Switching to Tx Mode-1 Threshold 280

 CLOCK PLL skipped
__ol_ath_attach: dev name wifi2
ol_ath_attach() BMI inited.
ol_ath_attach() BMI Get Target Info.
Chip id: 0x7, chip version: 0x4100016d

 CE WAR Disabled
NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
ol_ath_attach() configure Target .
ol_transfer_target_eeprom_caldata: Target EEPROM caldata len 65535 doesn't equal to 2116
ol_transfer_bin_file: Board data file AR9887v1
ol_transfer_bin_file: Board Data File download to address=0x401cc0 file name=AR9887/fakeBoardData_AR6004.bin
ol_transfer_bin_file 3898: downloading file 3, Download data len 2116
Board extended Data download address: 0x0
ol_download_cal_data: Board data file: 3 successfully downloaded, download address: 00401cc0

 Mission mode: Firmware CHIP Version 0
ol_transfer_bin_file: Downloading firmware file: AR9887/athwlan.bin
ol_transfer_bin_file 3898: downloading file 1, Download data len 225968
Switching to Tx Mode-1 Threshold 280
ol_ath_attach() Download FW done.
ol_ath_attach() HT Create .
ol_ath_attach() HIF Claim.
ol_ath_attach() BMI Done.
ol_ath_attach 7321 host_enable 1 nss_nwifi_offload 1
ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
 OL_ACBKMinfree : 0
 OL_ACBEMinfree : 0
 OL_ACVIMinfree : 0
 OL_ACVOMinfree : 0
ol_ath_attach() WMI attached. wmi_handle c4a40000
CE_recv_buf_enqueue 844 Populate last entry 512 for CE 5
CE_recv_buf_enqueue 853 CE 5 wi 511 dest_ptr 0x4b67200 nbytes 0 recv_ctxt 0xc4a33cc0
Startup Mode-0 set

<=== cfg max peer id 1056 ====>
HTC Service:0x0300 ep:1 TX flow control disabled
htt_peer_map_timer_init Enter pdev c4b68000 hrtimer c4b6c8a0

 htt_alloc_peer_map_mem : Alloc Success : host q vaddr c4e20000 paddr 4e20000

 htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
CE_pkt_dl_len_set CE 4 Pkt download length 64
ol_txrx_pdev_attach: 1424 tx desc's allocated ; range starts from c4e30000
HTC Service:0x0100 ep:2 TX flow control disabled
wmi_service_ready_event_rx:  WMI UNIFIED SERVICE READY event
Firmware_Build_Number:0
host/RAM_fw Build Ver Mismatch: H:0x48, F:0x0 !
num_rf_chain:0x00000001  ht_cap_info:0x0000085b  vht_cap_info:0x338001b2  vht_supp_mcs:0x0000fffe

 RES CFG Support wmi_service_bitmap 874a

 Sending Ext resource cfg: HOST PLATFORM as 1 and fw_feature_bitmap as 10 to TGT
ol_ath_service_ready_event: tt_support: 0
LARGE_AP enabled. num_peers 144, num_vdevs 16, num_tids 256
idx 0 req 1  num_units 0 num_unit_info 2 unit size 404 actual units 145
ol_ath_alloc_host_mem_chunk req_id 1 idx 0 num_units 145 unit_len 404,
chunk 0 len 58580 requested ,ptr  0x4e50000
FIRMWARE:P 145 V 16 T 443

wmi_ready_event_rx:  WMI UNIFIED READY event
ol_ath_connect_htc() WMI is ready
target uses HTT version 2.2; host uses 2.2
ol_ath_attach() connect HTC.
bypasswmi : 0
ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
ol_regdmn_start  countrycode 840
isCountryCodeValid: EEPROM regdomain 0x0
ol_regdmn_init_channels: !avail mode 0x1ff80d (0x2) flags 0x2150
ol_regdmn_init_channels: !avail mode 0x1ff80d (0x20) flags 0xd0
ol_regdmn_init_channels: !avail mode 0x1ff80d (0x40) flags 0x150
Add VHT80 channel: 5210
Add VHT80 channel: 5290
Add VHT80 channel: 5530
Add VHT80 channel: 5610
Add VHT80 channel: 5690
Add VHT80 channel: 5775
Skipping VHT80 channel 5825
ol_regdmn_init_channels: !avail mode 0x1ff80d (0x200000) flags 0x4000100
ol_regdmn_init_channels: !avail mode 0x1ff80d (0x400000) flags 0x8000100
OL Resmgr Init-ed
ieee80211_bsteering_attach: Band steering initialized
acfg_attach: Offload using existing sock c59d2000
SPECTRAL : get_capability not registered
HAL_CAP_PHYDIAG : Capable
SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237)
SPECTRAL : get_capability not registered
HAL_CAP_RADAR   : Capable
SPECTRAL : Need to fix the capablity check for SPECTRAL
 (spectral_attach : 242)
SPECTRAL : get_capability not registered
HAL_CAP_SPECTRAL_SCAN : Capable
SPECTRAL : get_tsf64 not registered
spectral_init_netlink 78 NULL SKB
Green-AP : Green-AP : Attached

Green-AP : Attached
ol_ath_smart_ant_attach: Firmware doest not support Smart Antenna.
ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna.
ieee80211com_init_netlink: Socket already created c59d1000
ol_if_dfs_attach: called; ptr=c4ea9984, radar_info=c5983b28
dfs_attach: event log enabled by default
ol_ath_attach() UMAC attach .
ol_if_dfs_configure: FCC domain
ol_ath_attach: Calling ol_if_dfs_configure

 BURSTING enabled by default
ol_ath_attach: Set global_ic[3] ..ptr:f2643c90
osif_wrap_attach:434 osif wrap attached
osif_wrap_devt_init:395 osif wrap dev table init done
 Wrap Attached: Wrap_com =c68ea200 ic->ic_wrap_com=c68ea200 &wrap_com->wc_devt=c68ea200
__ol_ath_attach: hard_header_len reservation 74
ol_ath_thermal_mitigation_attach: TT not supported in FW
init vbr, registering ioctl
init vbr 2
module chardrv being loaded.
etherip: Ethernet over IPv4 tunneling driver
Allocating ethip0
bootlogd: cannot allocate pseudo tty: No such file or directory
urandom start: failed.
Populating dev cache
tar: dev/disk/by-label/rootfsx2fdevx2fmmcbl: No such file or directory
tar: error exit delayed from previous errors
udev-cache: update failed!
INIT: Entering runlevel: 5
Configuring network interfaces... done.
Starting Dropbear SSH server: [wifi2] FWLOG: [3272] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x460, 0x460, 0x0 )
[wifi2] FWLOG: [3272] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x460, 0x460, 0x0 )
[wifi2] FWLOG: [3272] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x460, 0x460, 0x0 )
[wifi2] FWLOG: [3272] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x460, 0x460, 0x0 )
[wifi2] FWLOG: [3274] WHAL_ERROR_RESET_PM (  )
[wifi2] FWLOG: [3278] WAL_DBGID_DEV_RESET ( 0x1, 0x1, 0x1 )
dropbear.
Starting watchdog:

Starting syslogd/klogd: done
Starting internet superserver: xinetd.

Boot Bank: A Count:1
A: 3.2.0-HA-650478 B: 3.0.1-HC-649857

Serial: 3040xxxxxxxxxx
MAC: 00:19:92:xx:xx:xx

===========================
Access Point Console (3040)
===========================
User Access verification


QorIQ SDK (FSL Reference Distro) 1.9 bsap3040 /dev/ttyS0

bsap3040 login:

See also

Products

Bluesocket Family Access Points