TP-LINK TL-WN722N v1.x
From TechInfoDepot
(Redirected from TP-LINK TL-WN722N)
Jump to navigationJump to searchbgn (N150) | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
150Mbps High Gain Wireless USB Adapter | |||||||||||||
![]() | |||||||||||||
WikiDevi.wi-cat.ru | |||||||||||||
Platform | |||||||||||||
Brand • Model • Rev |
TP-LINK TL-WN722N v1.x | ||||||||||||
Series |
TL-WN722N | ||||||||||||
Interface |
USB 2.0 | ||||||||||||
Connector |
Male A | ||||||||||||
Form factor |
dongle | ||||||||||||
FCCID | |||||||||||||
Chipset |
Atheros AR9002U | ||||||||||||
Chip1 |
Atheros AR9271L | ||||||||||||
Antenna Connection |
RP-SMA | ||||||||||||
MIMO status |
1x2:1 | ||||||||||||
Wireless Standards |
IEEE 802.11b/g/n | ||||||||||||
802.11n |
up to 150 Mbps | ||||||||||||
802.11g |
up to 54 Mbps | ||||||||||||
802.11b |
up to 11 Mbps | ||||||||||||
Operating Frequency |
2.4 GHz | ||||||||||||
Probable Linux driver | |||||||||||||
Windows driver | |||||||||||||
Retail | |||||||||||||
Availability | common | ||||||||||||
FCC approval date | 18 November 2009 | ||||||||||||
UPC |
845973050467 (UPC DB, On eBay) | ||||||||||||
EAN |
6935364050467 (UPC DB, On eBay) | ||||||||||||
ASINs |
B002SZEOLG ![]() B002WBX9C6 ![]() | ||||||||||||
Country of manuf | China | ||||||||||||
| |||||||||||||
|
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented TP-LINK device with specifications, see TP-LINK.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
The TP-LINK TL-WN722NC is this adapter with an included cradle.
"11n High-gain USB Adapter-6 (AR) A" and "REV: 1.0" is silkscreened
- on the board in the FCC photos (PCB v1.0 Atheros AR9271-AL1E)
Known at least two EAN numbers: 6935364050467 and 6935364090432
- 1T1R SISO, 4dBi detachable Omni Directional antenna (RP-SMA conn.)
- Wi-Fi Certified : WFA8529 (as of 01/11/2010)
Links of Interest
- Product page (TL-WN722N) • Product page (TL-WN722NC)
Pictures
- Images from TP-LINK
- External
Notes
Versions
- Version 1.10 has been seen printed on the box but is still the same chipset.
- "2052500328" and "REV: 1.1" is silkscreened on the board (PCB Version 1.1)
- Product Version 1.10 (on the box) with PCB Version 1.2 has been seen but
- is still the same chipset (minor layout differences vs. PCB Version 1.1)
- Version 2.x is using Realtek RTL8188EUS chip. See TP-LINK TL-WN722N v2.
- Version 3.x is using Realtek RTL8188EUS chip. It is a rebadged v2.
FCC test results
- Radiated power (with antenna): 98.72 dBuV/m peak (802.11b CH6)
- Output power (before antenna): 17.8 dBm peak (802.11b CH6) (60.26mW)
Additional info
- This device supports a maximum of 2 simultaneous AP and 7 clients VIFs w/ ath9k_htc
- Output of sudo lsusb -v -d 0cf3:9271 here, or here.
lsusb output |
---|
Bus 003 Device 004: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 idVendor 0x0cf3 Atheros Communications, Inc. idProduct 0x9271 AR9271 802.11n bcdDevice 1.08 iManufacturer 16 ATHEROS iProduct 32 USB2.0 WLAN iSerial 48 12345 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 60 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 6 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x06 EP 6 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) |
iw list dump |
---|
Debian GNU/Linux 7.9 (wheezy) linux-image-3.16.0-0.bpo.4-amd64_3.16.7-ckt11-1+deb8u6~bpo70+1 (ath9k_htc) firmware-atheros_0.43~bpo70+1 (htc_9271.fw v1.3) Wiphy phy0 Band 1: Capabilities: 0x116e HT20/HT40 SM Power Save disabled RX HT20 SGI RX HT40 SGI RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-7 Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) * 2437 MHz [6] (20.0 dBm) * 2442 MHz [7] (20.0 dBm) * 2447 MHz [8] (20.0 dBm) * 2452 MHz [9] (20.0 dBm) * 2457 MHz [10] (20.0 dBm) * 2462 MHz [11] (20.0 dBm) * 2467 MHz [12] (20.0 dBm) * 2472 MHz [13] (20.0 dBm) * 2484 MHz [14] (disabled) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 max scan IEs length: 2257 bytes Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) * CMAC (00-0f-ac:6) Available Antennas: TX 0x1 RX 0x1 Configured Antennas: TX 0x1 RX 0x1 Supported interface modes: * IBSS * managed * AP * AP/VLAN * monitor * mesh point * P2P-client * P2P-GO software interface modes (can always be added): * AP/VLAN * monitor valid interface combinations: * #{ managed, P2P-client } <= 2, #{ AP, mesh point, P2P-GO } <= 2, total <= 2, #channels <= 1 Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * remain_on_channel * set_tx_bitrate_mask * action * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * Unknown command (84) * Unknown command (87) * Unknown command (85) * Unknown command (89) * Unknown command (92) * connect * disconnect Supported TX frame types: * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * Unknown mode (10): 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 Supported RX frame types: * IBSS: 0x40 0xb0 0xc0 0xd0 * managed: 0x40 0xd0 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * mesh point: 0xb0 0xc0 0xd0 * P2P-client: 0x40 0xd0 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * Unknown mode (10): 0x40 0xd0 Device supports RSN-IBSS. HT Capability overrides: * MCS: ff ff ff ff ff ff ff ff ff ff * maximum A-MSDU length * supported channel width * short GI for 40 MHz * max A-MPDU length exponent * min MPDU start spacing Device supports TX status socket option. Device supports HT-IBSS. |