Panasonic Switch-M8eG (PN28080K)
From TechInfoDepot
(Redirected from Panasonic Switch-M8eG PN28080K)
Jump to navigationJump to search| Panasonic ES Networks 8 Port L2 Switching Hub | ||||||||||||||||
 | ||||||||||||||||
| 3rd Party Firmware | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| dd-wrt |
Status Unknown | |||||||||||||||
| OpenWrt | ||||||||||||||||
| Tomato any flavor |
Incompatible | |||||||||||||||
| Gargoyle |
Status Unknown | |||||||||||||||
| Platform | ||||||||||||||||
| Brand • Model • Rev |
Panasonic Switch-M8eG | |||||||||||||||
| Model part number |
PN28080K | |||||||||||||||
| CPU1 |
Realtek RTL8380M | |||||||||||||||
| CPU1 Type |
MIPS 4KEc | |||||||||||||||
| CPU1 Speed |
500 MHz | |||||||||||||||
| Flash1 Chip |
Macronix MX25L25635FMI-10G | |||||||||||||||
| Flash1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (SPI NOR) | |||||||||||||||
| RAM1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (DDR3) | |||||||||||||||
| RAM1 Chip |
Winbond W631GG8KB-15 | |||||||||||||||
| ETH chip1 |
Realtek RTL8380M | |||||||||||||||
| ETH chip2 |
Realtek RTL8218B | |||||||||||||||
| Switch |
Realtek RTL8380M | |||||||||||||||
| Ethernet Port Count |
8-1GbE | |||||||||||||||
| Ethernet connector |
8P8C | |||||||||||||||
| Wired Standard |
IEEE 802.3i/3u/3ab | |||||||||||||||
| Auto-MDIX |
supported | |||||||||||||||
| Jumbo frame |
yes | |||||||||||||||
| Switch Class |
managed | |||||||||||||||
|
Ethernet OUI: none specified | ||||||||||||||||
| Expansion IF types |
SFP | |||||||||||||||
| SFP ports |
1 | |||||||||||||||
| Stock bootloader |
U-Boot | |||||||||||||||
| Power |
100-240 VAC ~ 50/60 Hz, 0.5 A | |||||||||||||||
| Connector type |
C13 | |||||||||||||||
| Serial Port (UART) |
yes, RJ45 console | |||||||||||||||
|
| ||||||||||||||||
| 3rd Party Firmware Support | ||||||||||||||||
| Retail | ||||||||||||||||
| ASIN |
B01BHO64UW  | |||||||||||||||
| ||||||||||||||||
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented Panasonic device with specifications, see Panasonic.
Overview
Specification
- SoC: Realtek RTL8380M
- Flash: Macronix MX25L25635FMI-10G (32MB, SPI NOR)
- RAM: Winbond W631GG8KB-15 (128MB, DDR3)
- Ethernet: 8x 1GbE ports, 1x SFP slot
- Ports 1-8: TP, RTL8218B (PHY)
- Port 9: SFP, RTL8380M (SoC)
- UART: RS-232 port on the front panel (RJ-45)
- Pin: 3:TX, 4:GND, 5:GND, 6:RX (RJ-45) 9600N8
- Power: 100-240 VAC, 50/60 Hz, 0.5 A
- Plug: IEC 60320-C13
- Stock OS: VxWorks based
- LEDs/Keys: 7x / 1x
Links of Interest
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: realtek
OpenWrt Subtarget: rtl838x
OpenWrt Package architecture: mips_4kec
Support started version: 22.03.0
Current supported version: 23.05.5
OpenWrt Target: realtek
OpenWrt Subtarget: rtl838x
OpenWrt Package architecture: mips_4kec
Support started version: 22.03.0
Current supported version: 23.05.5
Please insert instructions here
See also
- Panasonic Switch-M8eG (PN28080K) • Realtek RTL8380M/RTL8218B
- Panasonic Switch-M16eG (PN28160K) • Realtek RTL8380M//RTL8218B
- Panasonic Switch-M24eG (PN28240K) • Realtek RTL8382M/RTL8218B/RTL8218FB
- Panasonic Switch-M48eG (PN28480K) • Realtek RTL8393M/RTL8218B/RTL8218FB
