Wandboard PICO-IMX6UL-KIT
bgn (N150) | |
---|---|
IoT Hobbit Board | |
Homepage | |
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt |
Status Unknown |
Tomato any flavor |
Incompatible |
Platform | |
Brand • Model • Rev |
Wandboard PICO-IMX6UL-KIT A1 |
FCC ID |
none specified |
Type |
IoT board, wireless embedded board |
CPU1 |
Freescale (NXP) i.MX6UL |
CPU1 Type |
ARM Cortex-A7 |
CPU1 Speed |
528 MHz |
Flash1 Chip |
Kingston EMMC04G-M627 |
Flash1 Size |
4 GiB 4,096 MiB <br />4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br /> (eMMC) |
RAM1 Size |
1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (DDR3L SDRAM) |
RAM1 Chip |
SK hynix H5TC4G63CFR-PBA x 2 |
ETH chip1 |
Freescale (NXP) i.MX6UL |
ETH chip2 |
Micrel KSZ8081RNB |
Ethernet Port Count |
1-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
Stock bootloader |
U-Boot |
Stock FW OS |
Android |
Expansion IF types |
USB 2.0, MikroBus |
USB ports |
2 |
USB Hub Compatible |
Untested |
Power |
5 VDC, 1 A |
Connector type |
barrel 5.5 mm (OD) 2.1 mm (ID) |
Serial Port (UART) |
yes, 3.3V TTL, 6-pin header, unpopulated |
Flags: Bluetooth 4.0, 3.5mm audio output, GPIO, I2C, SPI | |
Additional chips | |
Other | |
| |
Manuf/OEM/ODM |
TechNexion PICO-IMX6UL |
Retail | |
(Est.) release date | February 2016 |
(Est.) initial retail price (in USD): | $69 |
ASINs |
B08944H8ZG B0894L686H |
Country of manuf | Taiwan |
Radio 1 | |
Radio1 module | |
Radio1 module IF |
SDIO (module) |
Chip1 |
Broadcom BCM43430 |
Wireless interface OUI |
21:11:16 |
Antenna Connector Type |
U.FL |
MIMO status |
1x1:1 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 150 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
For a list of all currently documented Micrel (Kendin) chipsets with specifications, see Micrel.
For a list of all currently documented Wandboard device with specifications, see Wandboard.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
PICO-HOBBIT and REV: A1 are silkscreened on the carrier board.
- An earlier version of this board was referred to as HobbitBoard.
Hardware specification
- CPU: Freescale (NXP) i.MX6UL (MCIMX6G2D)
- @528MHz Single Core ARM (Cortex-A7)
- Memory: 2x 512MB SDRAM (DDR3L)
- Onboard Storage: 4GB (eMMC)
- Wi-Fi: 802.11bgn 1T1R
- Network: 1x FE (100M)
- USB: 2x USB 2.0 ports
- Power Source: 5V/1A
Links of Interest
- Wandboard.org spins Brilo-on-iMX6UL IoT Hacker Board on LinuxGizmos
- PICO-IMX6ULHARDWARE MANUAL on NXP.com
- Wandboard Introduces $69 Hobbitboard Made for Brillo Powered by NXP i.MX6 UltraLite Processor on CNXSOFT
See also
- Wandboard
- Embedded system/IoT board
- Embedded system/wireless embedded board
- Embedded System Freescale (NXP)
- Embedded System i.MX6UL
- Freescale (NXP)
- Embedded System ARM
- Embedded System Cortex-A7
- Embedded System KSZ8081RNB
- Embedded System Micrel
- Micrel
- Manuf TechNexion
- Embedded System Broadcom
- Embedded System BCM43430
- Broadcom
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Embedded System
- English Documentation