Endian 4i Edge 200
From TechInfoDepot
(Redirected from Endian Endian 4i Edge 200)
Jump to navigationJump to search| Industrial Security Appliance | |
| 3rd Party Firmware | |
|---|---|
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Endian 4i Edge 200 |
| Type |
security appliance |
| CPU1 |
Marvell 88F6281 |
| CPU1 Type |
ARMv5 |
| CPU1 Speed |
1.2 GHz |
| Flash1 Chip |
Micron 29F4G08AAC |
| Flash1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (NAND) |
| RAM1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> |
| RAM1 Chip |
Nanya NT5TU128M8GE-AC x 4 |
| ETH chip1 |
Marvell 88F6281 |
| ETH chip2 |
Marvell 88E1116R |
| Switch |
Marvell 88E6171R |
| Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN |
| Wired Standard |
IEEE 802.3i/3u/3ab |
|
| |
| Stock bootloader |
U-Boot |
| Expansion IF types |
microSD, Mini PCIe |
| Mini PCIe slots |
1 |
| SD/MMC Slots |
1 |
| Power |
12 VDC, 1.25 A |
| Connector type |
barrel |
| Serial Port (UART) |
yes, (115200 8N1) |
| JTAG Port |
no |
| Other | |
|
| |
| 3rd Party Firmware Support | |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
Overview
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
OpenWrt Target: kirkwood
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_xscale
Support started version: 22.03.0
Current supported version: 23.05.5
Comment:
One port is connected to phy: Marvell 88E1116R-NNC1
OpenWrt Target: kirkwood
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_xscale
Support started version: 22.03.0
Current supported version: 23.05.5
Comment:
One port is connected to phy: Marvell 88E1116R-NNC1
Please insert instructions here
