Allnet ALL0258
From TechInfoDepot
(Redirected from ALLNET ALL0258)
Jump to navigationJump to searchabg (AG108) | |
---|---|
wireless router | |
3rd Party Firmware | |
dd-wrt | |
OpenWrt |
Status Unknown |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Allnet ALL0258 |
FCC ID |
none specified |
Type |
wireless router |
CPU1 | |
CPU1 Type |
MIPS 4Kc |
CPU1 Speed |
180 MHz ( 2 cores ) |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
RAM1 Chip |
Brand? Model? |
ETH chip1 |
Brand? Model? |
Ethernet Port Count |
1-LAN |
802dot11 OUI: none specified | |
Stock bootloader |
redboot |
Expansion IF types |
none specified |
Power |
12 VDC, 1 A |
Serial Port (UART) |
yes |
Special Features |
EOC-5610 clone |
Other | |
| |
3rd Party Firmware Support | |
Radio 1 | |
Chip1 |
Atheros AR5112 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
Wireless Standard |
IEEE 802.11a/b/g |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
2.4 or 5 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Allnet device with specifications, see Allnet.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
install micro-redboot 1st
Flashing OpenWrt
This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Forum
OpenWrt Target: ath25
Support started version: 8.09
Current supported version: 8.09
On the OpenWrt Forum
OpenWrt Target: ath25
Support started version: 8.09
Current supported version: 8.09
Please insert instructions here