ZyXEL NR7101
From TechInfoDepot
Jump to navigationJump to search| 5G NR Outdoor Router | |
| Homepage | |
|---|---|
| Wikipedia | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
ZyXEL NR7101 |
| Type |
CPE, router |
| CPU1 | |
| CPU1 Type |
MIPS 1004Kc |
| CPU1 Speed |
880 MHz ( 2 cores ) 16-bit |
| Flash1 Chip |
Macronix MX30LF1G18AC |
| Flash1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND) |
| RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 | |
| ETH chip2 |
MediaTek MT7530 |
| Ethernet Port Count |
1-1GbE-LAN |
| Wired Standard |
IEEE 802.3i/3u/3ab |
|
| |
| Stock bootloader |
U-Boot |
| Expansion IF types |
none specified |
| PoE |
802.3at, standard |
| Power |
? VDC, ? A |
| Connector type |
PoE |
| Serial Port (UART) |
yes, 3.3, (57600 8N1) |
| Other | |
|
| |
| 3rd Party Firmware Support | |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented ZyXEL device with specifications, see ZyXEL.
Overview
The ZyXEL NR7101 is an 802.3at PoE powered 5G outdoor (IP68) CPE with integrated directional 5G/LTE antennas.
The device is built as an outdoor ethernet to 5G/LTE bridge or router. The Wifi interface is intended for installation and/or temporary management purposes only.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: mt7621
OpenWrt Package architecture: mipsel_24kc
Support started version: 21.02.0
Current supported version: 23.05.5
Comment:
Modem has 5G/NR support: Quectel RG502Q-EA
Modem is soldered and not replaceable. Modem bus connection is USB3
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: mt7621
OpenWrt Package architecture: mipsel_24kc
Support started version: 21.02.0
Current supported version: 23.05.5
Comment:
Modem has 5G/NR support: Quectel RG502Q-EA
Modem is soldered and not replaceable. Modem bus connection is USB3
Please insert instructions here
JTAG-Serial Info
Serial
Serial Pinouts
57600N1
Located on populated 5 pin header J5:
[o] GND [ ] key - no pin [o] RX [o] TX [o] 3.3V Vcc
