ZyXEL NBG6617
From TechInfoDepot
Jump to navigationJump to searchabgn+ac (AC1300) | |
---|---|
AC1300 MU-MIMO Dual-Band Wireless Gigabit Router | |
Homepage | |
Wikipedia | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
ZyXEL NBG6617 |
Model Part Number |
EU0101F |
FCC ID | |
IC ID | |
Type |
wireless router |
CPU1 |
Qualcomm IPQ4018 |
CPU1 Type |
ARMv7 Cortex-A7 |
CPU1 Speed |
638 MHz ( 4 cores ) |
Flash1 Chip |
Macronix MX25L25635F |
Flash1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (SPI NOR) |
RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (DDR3L 1600/1866 @ 537 MHz) |
RAM1 Chip |
Nanya NT5CC128M16IP-DI |
ETH chip1 |
Qualcomm IPQ4018 |
Switch |
Qualcomm Atheros QCA8075 |
Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
802dot11 OUI: none specified | |
Stock bootloader |
U-Boot |
Stock FW OS |
Linux |
Expansion IF types |
USB 3.0 |
USB ports |
1 |
USB Hub Compatible |
Untested |
Power |
12 VDC, 2 A |
Connector type |
barrel |
Serial Port (UART) |
yes, 4-pin header, internal, TTL 3.3V, (115200 8N1) |
Flags: Wave2, MU-MIMO | |
Other | |
Default IP address: 192.168.1.1 | |
3rd Party Firmware Support | |
Retail | |
FCC approval date | 27 July 2016 |
(Est.) release date | 20 September 2016 |
ASINs |
B01LWXIXUW B01M1BZ7FY |
Country of manuf | China |
Physical | |
Dimensions |
4.61 x 1.15 x 6.69 inches |
Weight |
11.7 ounces |
Radio 1 | |
Chip1 |
Qualcomm IPQ4018 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
U.FL |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio 2 | |
Chip1 |
Qualcomm IPQ4018 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
U.FL |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11a/n/ac |
802.11ac |
up to 867 Mbps |
802.11n |
up to 300 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented ZyXEL device with specifications, see ZyXEL.
Overview
- Default settings in this entry are per the FCC label.
- CPU: Quad-Core @600MHz, 256MB RAM, 16MB Flash
- WLAN: AC1300 802.11abgn/ac (400+867 Mbps)
Specifications
- CPU: 600MHz Quad-Core Processor, RAM: 256MB, FLA: 32MB
- Wireless Standard: 802.11bgn (2.4GHz), 802.11an/ac (5GHz)
- Wireless Speed: 400 Mbps for 2.4GHz, 867 Mbps for 5GHz
- WLAN Features: Wave2, MU-MIMO, Guest Wi-Fi, WPS, WMM
- Wireless Security: WPA/WPA2, WPA-PSK/WPA2-PSK
- Antenna: 2x 7dBi external antennas (RP-SMA)
- Ports: 1x WAN GbE, 4x LAN GbE, 1x USB 3.0
- USB Support: Mass storage support by SMB/CIFS/FTP, Print server
- Application Control: Parental control, ONE Connect, ZyXEL Photo
- System Management: Online firmware upgrade, Wake on LAN, UPnP
- Media Server: DLNA, WiFi Multimedia (WMM), SMB
- Operation Mode: Router mode, Access point mode
- Power: 12V DC, 2A; Power consumption: 20W
Links of Interest
Firmware
- ZyXEL NBG6617:
SOC: Qualcomm IPQ4018 @710MHz (QCA Dakota) WiSoC CPU: Quad-Core ARMv7 Cortex-A7 rev 5 (v7l) Processor FLASH: Macronix MX25L25635F 32MiB (NOR) RAM: Nanya NT5CC128M16IP-DI 256MiB (DDR3L-1600/1866 @537MHz) ETH: Qualcomm Atheros QCA8075 Gigabit Switch (4x LAN, 1x WAN) USB: 1x 3.0 (via Synopsys DesignWare DWC3 controller in SoC) WLAN1: Qualcomm IPQ4018 2.4GHz 802.11bgn 2:2x2 WLAN2: Qualcomm IPQ4018 5GHz 802.11an/ac 2:2x2 INPUT: RESET Button, WiFi On/Off Button, WPS Button LEDS: Power, WAN, LAN 1-4, WLAN 2.4GHz, WLAN 5GHz, USB, WPS Serial: WARNING: The serial port needs a TTL/RS-232 3.3v level converter! Serial setting is 115200-8-N-1. 1x4 .1" header comes pre-soldered. Pinout: [1] +3.3V (label printed on PCB), (2) Rx, (3) GND, (4) Tx
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the github
OpenWrt Target: ipq40xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_cortex-a7_neon-vfpv4
Support started version: 19.07.0
Current supported version: 23.05.5
Comment:
See the device page for VLAN tagging
On the OpenWrt Wiki
On the github
OpenWrt Target: ipq40xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_cortex-a7_neon-vfpv4
Support started version: 19.07.0
Current supported version: 23.05.5
Comment:
See the device page for VLAN tagging
Please insert instructions here
Categories:
- ZyXEL
- Embedded system/wireless router
- Embedded System Qualcomm
- Embedded System IPQ4018
- Qualcomm
- Embedded System ARMv7
- Embedded System Cortex-A7
- Embedded System Qualcomm Atheros
- Embedded System QCA8075
- Qualcomm Atheros
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation