ZTE MF283+
From TechInfoDepot
(Redirected from ZTE MF283plus)
Jump to navigationJump to searchbgn (N300) | |
|---|---|
| 4G LTE Wireless router | |
 | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
ZTE MF283+ |
| FCC ID |
none specified |
| Type |
wireless router |
| CPU1 | |
| CPU1 Speed |
400 MHz |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (SPI) |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (DDR2) |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 | |
| Switch | |
| VOIP Ports |
2 |
| Ethernet Port Count |
4-100MbE-LAN |
| Wired Standard |
IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Stock bootloader |
U-Boot |
| Expansion IF types |
Mini PCIe, sim |
| SIM Card slot |
1 |
| Mini PCIe slots |
1 |
| Serial Port (UART) |
yes, 3.3, (57600 8N1) |
|
Flags: LTE | |
| Other | |
|
| |
| 3rd Party Firmware Support | |
| Radio 1 | |
| Chip1 | |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented ZTE device with specifications, see ZTE.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
Built-in ZTE P685M modem
unpopulated USB A connector on PCB
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 21.02.0
Current supported version: 23.05.5
Comment:
built-in ZTE P685M PCIe MiniCard LTE modem
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 21.02.0
Current supported version: 23.05.5
Comment:
built-in ZTE P685M PCIe MiniCard LTE modem
Please insert instructions here
JTAG-Serial Info
Serial
Serial Pinouts
1: VCC, 2: TXD, 3: RXD, 4: GND,
settings: 57600-8-N-1.
