Xiaomi MiWiFi 4C
From TechInfoDepot
(Redirected from Xiaomi Mi Router 4C)
Jump to navigationJump to searchbgn (N300) | |
|---|---|
| Mi Router 4C R4CM | |
 | |
| Homepage | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Xiaomi MiWiFi 4C |
| FCC ID | |
| Type |
wireless router |
| CPU1 | |
| CPU1 Type |
MIPS 24KEc |
| CPU1 Speed |
580 MHz |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
MediaTek MT7628DAN |
| ETH chip1 | |
| Switch | |
| Ethernet Port Count |
1-100MbE-WAN 2-100MbE-LAN |
| Wired Standard |
IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Stock bootloader |
U-Boot |
| Expansion IF types |
none specified |
| Power |
5 VDC, 1 A |
| Connector type |
barrel |
| Serial Port (UART) |
yes, 3.3, (115200 8N1) |
| Other | |
|
| |
| 3rd Party Firmware Support | |
| Retail | |
| FCC approval date | 12 April 2021 |
| Country of manuf | China |
| Radio 1 | |
| Chip1 | |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Xiaomi device with specifications, see Xiaomi.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: mt76x8
OpenWrt Package architecture: mipsel_24kc
Support started version: 21.02.0
Current supported version: 23.05.5
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: mt76x8
OpenWrt Package architecture: mipsel_24kc
Support started version: 21.02.0
Current supported version: 23.05.5
Please insert instructions here
See also
- Xiaomi MiWiFi 4 (M41) - MediaTek MT7621A @880MHz, 128MB/128MB, GbE, AC1200
- Xiaomi MiWiFi 4A (GbE) - MediaTek MT7621A @880MHz, 16MB/128MB, GbE, AC1200
- Xiaomi MiWiFi 4A (100M) - MediaTek MT7628DAN @580MHz, 16MB/64MB, 100M, AC1200
- WLAN: MediaTek MT7628DA (2.4GHz WiSoC)/MT7612EN (2T2R 802.11ac), (M49) • Review
- Flash: Winbond W25Q128JVSC (16MB), RAM: 64MB (int. WiSoC); MTO-WRM49-V1.2 • PCB
- Xiaomi MiWiFi 4C - MediaTek MT7628N @580MHz, 16MB/64MB, 100M, N300 (2.4GHz)
- Xiaomi MiWiFi 4Q - Qualcomm Atheros QCA9561 @775MHz, 16MB/64MB, 100M, N450
