Western Digital Caviar 80 GB, WD800BB (00CAA1)

From TechInfoDepot
Jump to navigationJump to search
'WD Caviar' Enhanced IDE Hard Drive
WD800BB-00CAA1
Brand • Model • Rev
Western Digital WD800BB 00CAA1
Interface
IDE (Ultra ATA/100)
Form factor
3.5"
Controler
Western Digital WD80C24
Flash1 Chip
STMicro M29F102BB
Flash1 Size
128 KiB 0.125 MiB <br />131,072 B <br />1,024 Kib <br />1 Mib <br />1.220703e-4 GiB <br />
RAM1 Size
? MiB
RAM1 Chip
Samsung K4S161622D-TC70
Vendor stated capacity: 80 GB74.476 GiB <br />0.0727 TiB <br />76,263.108 MiB <br />80,000 MB <br />79,967,664,442.326 B <br />
Usable capacity: ? GiB

Additional chips
Voltage Regulator;International Rectifier;IRU1239SC;;1;
Spindle motor + VCM controller;STMicro;L6278;L6278 1.2, <...>, MALAYSIA, ST;1;
Read/Write channel IC;Western Digital;TALON 50G6474IBM141.1;;1;

Retail
(Est.) release date 2002
ASIN B003FDEJBA Flag of the United States.svg
Country of manuf Malaysia

Western Digital not currently documented.

Overview

From a unit w/ a S/N of WMA8C1541008, manuf. date of 26 MAR 2002, and DCM of HSEHNQ2AH...

  • "2060-001092-007" and "REV A" is etched onto the board.

From online marketplace listings of this board, it seems to be using..

  • 50G6474IBM141.1 <??>, Read/Write channel IC @ U7
  • L6278, Spindle motor + VCM controller @ U1
Utility output
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar family
Device Model:     WDC WD800BB-00CAA1
Serial Number:    WD-WCA8E5603170
Firmware Version: 17.07W17
User Capacity:    80 026 361 856 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   5
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sun Sep  7 20:06:59 2008 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		 (3120) seconds.
Offline data collection
capabilities: 			 (0x3b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  58) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   200   198   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0007   118   096   021    Pre-fail  Always       -       3166
  4 Start_Stop_Count        0x0032   100   100   040    Old_age   Always       -       895
  5 Reallocated_Sector_Ct   0x0033   199   199   140    Pre-fail  Always       -       10
  7 Seek_Error_Rate         0x000b   200   200   051    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   039   039   000    Old_age   Always       -       44796
 10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0013   100   100   051    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       799
196 Reallocated_Event_Count 0x0032   190   190   000    Old_age   Always       -       10
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0012   200   200   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x000a   200   253   000    Old_age   Always       -       9
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Conveyance offline  Completed without error       00%       958         -
# 2  Conveyance offline  Completed without error       00%       957         -
# 3  Extended offline    Completed without error       00%       935         -
# 4  Extended offline    Completed without error       00%       921         -
# 5  Extended offline    Aborted by host               80%       919         -
# 6  Short captive       Completed without error       00%       573         -
# 7  Short offline       Completed without error       00%       976         -

Device does not support Selective Self Tests/Logging
  • hdparm -i /dev/hda:
Model=WDC WD800BB-00CAA1, FwRev=17.07W17, SerialNo=WD-WCA8E4158633
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=40
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156301488
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4 
DMA modes: mdma0 mdma1 mdma2 
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version: 

* signifies the current active mode