WatchGuard Firebox M300 (ML3AE8)
| WatchGuard Firebox M300 | |
 | |
| Homepage | |
|---|---|
| WikiDevi.wi-cat.ru | |
| 3rd Party Firmware | |
| dd-wrt | |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
WatchGuard Firebox M300 |
| Model Part Number |
ML3AE8 |
| Type |
security appliance |
| CPU1 |
Freescale (NXP) T2081 |
| CPU1 Type |
PowerPC |
| CPU1 Speed |
1.5 GHz ( 4 cores ) 64-bit |
| Flash1 Chip |
Spansion S29GL032N90TFI04 |
| Flash1 Size |
4 MiB 4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (SPI) |
| Flash2 Chip |
Transcend Model? |
| Flash2 Size |
8 GiB 8,192 MiB <br />8,589,934,592 B <br />67,108,864 Kib <br />8,388,608 KiB <br />65,536 Mib <br /> (SD Card) |
| RAM1 Size |
4 GiB 4,096 MiB <br />4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br /> (DDR3L DIMM) |
| RAM1 Chip |
Transcend Model? |
| ETH chip1 |
Freescale (NXP) T2081 |
| ETH chip2 |
Marvell 88E1543 |
| Switch |
Marvell 88E6171R |
| Ethernet Port Count |
1-1GbE-WAN 7-1GbE-LAN |
| Wired Standard |
IEEE 802.3i/3u/3ab |
|
| |
| Stock bootloader |
U-Boot 2014.07 |
| Stock FW OS |
Linux 3.12.19-rt30 WatchGuard Fireware OS Version 12.4.1.B595401 |
| Expansion IF types |
SD Card slot, USB 2.0 |
| USB ports |
2 |
| SD/MMC Slots |
1 |
| USB Hub Compatible |
Untested |
| Power |
100-240 VAC ~ 50/60 Hz, 1.5 A |
| Connector type |
C13 |
| Serial Port (UART) |
yes, console port, RJ45, (115200 8N1) |
|
Flags: RTC w/ battery, power switch, heatsink, fan, metal case | |
|
Additional chips | |
| Other | |
|
Default IP address: 10.0.1.1 | |
| 3rd Party Firmware Support | |
| Retail | |
| Availability | EOL (12/31/2022) |
| (Est.) release date | May 2017 |
| ASIN |
B00WYOVDQA  |
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented WatchGuard device with specifications, see WatchGuard.
Overview
- CPU: Freescale (NXP) T2081 @1.8GHz
- (PowerPC 4C/8T 64-bit Core e6500)
Hardware specification
- CPU: Freescale (NXP) T2081 Quad Core 64-bit PowerPC (@1.5GHz)
- Memory: 4GB DDR3L ECC U-DIMM
- Storage: 4MB SPI Flash, 8GB SD Card
- Network: 8x Gigabit Ethernet ports
- USB: 2x USB 2.0 ports
- Power: 100-240V C13
Links of Interest
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
| This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
| This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
| OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
On the OpenWrt Wiki
OpenWrt Subtarget: generic
Support started version: ?
Current supported version: snapshot
Please insert instructions here
Pictures
Board Top
Board Bottom
