WAVLINK WL-WN531G3
From TechInfoDepot
Jump to navigationJump to searchabgn+ac (AC1200) | |
---|---|
AC1200 Wireless Router | |
Homepage | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
WAVLINK 531G3 |
FCC ID |
none specified |
Type |
wireless router |
CPU1 |
Mediatek MT7620A |
CPU1 Type |
MIPS 24KEc |
CPU1 Speed |
580 MHz 32-bit |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip |
Brand? Model? |
ETH chip1 |
Mediatek MT7620A |
Switch |
Mediatek MT7620A |
Ethernet Port Count |
1-1GbE-WAN 1-1GbE x 3-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
802dot11 OUI: none specified | |
Stock bootloader |
U-Boot |
Expansion IF types |
USB 2.0 |
USB ports |
1 |
USB Hub Compatible |
Untested |
Power |
5 VDC, 2 A |
Connector type |
barrel |
Serial Port (UART) |
yes, 3.3, (57600 8N1) |
Other | |
| |
3rd Party Firmware Support | |
Retail | |
Newegg | 9SIA6PF7U20700 |
Radio 1 | |
Chip1 |
Mediatek MT7620A |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio 2 | |
Chip1 |
MediaTek MT7612E |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11a/n/ac |
802.11ac |
up to 867 Mbps |
802.11n |
up to 300 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented WAVLINK device with specifications, see WAVLINK.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: ramips
OpenWrt Subtarget: mt7620
OpenWrt Package architecture: mipsel_24kc
Support started version: ?
Current supported version: snapshot
OpenWrt Target: ramips
OpenWrt Subtarget: mt7620
OpenWrt Package architecture: mipsel_24kc
Support started version: ?
Current supported version: snapshot
Please insert instructions here
Categories:
- WAVLINK
- Embedded system/wireless router
- Embedded System Mediatek
- Embedded System MT7620A
- Mediatek
- Embedded System MIPS 24KEc
- Embedded System
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System MediaTek
- Embedded System MT7612E
- MediaTek
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation