UPVEL UR-326N4G
From TechInfoDepot
Jump to navigationJump to searchbgn (N300) | |
|---|---|
| wireless router | |
| 3rd Party Firmware | |
| dd-wrt | |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
UPVEL UR-326N4G |
| FCC ID | |
| Type |
wireless router |
| CPU1 |
Ralink RT3052 |
| CPU1 Type |
MIPS 24KEc |
| CPU1 Speed |
384 MHz |
| Flash1 Chip |
Macronix Model? |
| Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Chip |
ESMT M12L128168A-6T x 2 |
| ETH chip1 |
Ralink RT3052 |
| Switch |
Ralink RT3052 |
| Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
| Wired Standard |
IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Stock bootloader |
U-Boot |
| Expansion IF types |
USB 2.0 |
| USB ports |
1 |
| USB Hub Compatible |
Untested |
| Power |
9 VDC, 1 A |
| Connector type |
barrel |
|
Flags: 3G capable | |
| Other | |
|
| |
| Manuf/OEM/ODM | |
| 3rd Party Firmware Support | |
| Retail | |
| FCC approval date | 16 August 2013 |
| Country of manuf | China |
| Radio 1 | |
| Chip1 |
Ralink RT3052 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
RP-SMA |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
The FCC test report identifies the manufacturer as Shenzhen MTN Electronics.
The power supply shown with the device in the FCC photos is a GOSPELL GP302U-090-100 (100-240VAC ~ 50/60Hz, 0.5A -> 9VDC, 1A).
Links of Interest
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
| This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
| OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 15.05
Current supported version: 19.07.10
Comment:
Image build disabled in master with commit d7d46da938e3
Image too big: snapshot
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 15.05
Current supported version: 19.07.10
Comment:
Image build disabled in master with commit d7d46da938e3
Image too big: snapshot
Please insert instructions here
Categories:
- UPVEL
- Embedded system/wireless router
- Embedded System Ralink
- Embedded System RT3052
- Ralink
- Embedded System MIPS 24KEc
- Embedded System
- Manuf Shenzhen MTN Electronics
- OpenWrt Was Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation
