Tenda W568R

abgn (AN900)
Wireless N900 Concurrent Dual-band Gigabit Router
Homepage	Product page
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Status Unknown
Platform
Brand • Model • Rev	Tenda W568R
FCC ID	V7TW568R
Type	wireless router
CPU1	Broadcom BCM4706
CPU1 Type	MIPS 74Kc
CPU1 Speed	600 MHz 8-bit
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	Winbond Model? x 2
ETH chip1	Broadcom BCM4706
Switch	Broadcom Model?
Ethernet Port Count	1-WAN 4-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: none specified
Expansion IF types	USB 2.0
USB ports	1
USB Hub Compatible	Untested
Power	12 VDC, 1.5 A
Connector type	barrel
Other
Default IP address: 192.168.0.1 the IP 192.168.0.1 is used by 799 additional devices of which 57 are Tenda devices Default login user: admin Default login password: admin admin:admin credentials used by 1343 additional devices of which 33 are Tenda devices
Retail
FCC approval date	11 April 2013
(Est.) initial retail price (in USD):	$299
Country of manuf	China
Radio 1
Chip1	Broadcom Model?
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	3x3:3
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 450 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Chip1	Broadcom Model?
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	3x3:3
Wireless Standard	IEEE 802.11a/n
802.11n	up to 450 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented Tenda device with specifications, see Tenda.

• 450 Mbps - 3SS 5GHz 802.11n (40MHz chan.),

• 450 Mbps - 3SS 2.4GHz 802.11n (40MHz chan.) = AN900 class

Overview

This device appears to use the same firmware as the Tenda N80.

This device is presumably completely Broadcom based... though the only thing that would be questionable would be the GbE Switch.

The device probably uses BCM4706 + 2x BCM4331 + BCM53125.