Tenda PA7
abgn+ac (AC650) (PL1000) | |
---|---|
AV1000 AC Wi-Fi Powerline Extender | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt |
Status Unknown |
Tomato any flavor |
Status Unknown |
Platform | |
Brand • Model • Rev |
Tenda PA7 |
FCC ID | |
Board ID |
10030831 V1.1 |
Type |
Powerline Access Point |
CPU1 |
Broadcom BCM47189B0 |
CPU1 Type |
ARM Cortex-A7 |
CPU1 Speed |
900 MHz |
CPU2 |
Broadcom BCM60350 |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
? MiB |
RAM1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
RAM1 Chip |
Winbond W631GG6KB-15 |
ETH chip1 |
Broadcom BCM47189B0 |
Ethernet Port Count |
1-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
Expansion IF types |
none specified |
Power |
100-240 VAC ~ 50/60 Hz, 0.1 A |
Connector type |
AC (direct) |
Flags: HomePlug AV2 1000, 256QAM | |
Other | |
Default SSID: Tenda_XXXXXX (26 addl. devices) | |
Retail | |
FCC approval date | 21 June 2019 |
Country of manuf | China |
Radio 1 | |
Chip1 |
Broadcom BCM47189B0 |
Wireless interface OUI |
50:0F:F5 |
Antenna Connector Type |
none specified |
MIMO status |
1x1:1 |
Wireless Standard |
IEEE 802.11a/n/ac |
802.11ac |
up to 433 Mbps |
802.11n |
up to 150 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
Radio 2 | |
Chip1 |
Broadcom BCM47189B0 |
Wireless interface OUI |
50:0F:F5 |
Antenna Connector Type |
none specified |
MIMO status |
1x1:1 |
Wireless Standard |
IEEE 802.11b/g/n |
N-QAM |
up to 200 Mbps |
802.11n |
up to 150 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Tenda device with specifications, see Tenda.
- • 1.0 Gbps PHY rate HomePlug AV2 (1.8-86 MHz frequencies) = PL1000 class
Overview
"10030831 V1.1" is silkscreened on the board in the FCC photos.
The device uses Broadcom BCM60350 as the HomePlug controller.
Sold as part of the Tenda PH10 AV1000 ac Wi-Fi Powerline Extender Kit which includes this PA7 with a Tenda P3 powerline adapter. This device does not appear to support configuration as single band with two-stream operation like the ZyXEL PLA5236 with similar hardware does. It is configured to use the Broadcom BCM47189B0 in 2x 1x1:1 mode.
- Web GUI: http://plc.tendawifi.com
Links of Interest
- Tenda
- Embedded system/Powerline Access Point
- Embedded System Broadcom
- Embedded System BCM47189B0
- Broadcom
- Embedded System ARM
- Embedded System Cortex-A7
- Embedded System BCM60350
- Has Mimo Status
- Embedded System IEEE 802.11a/n/ac
- Embedded System IEEE 802.11b/g/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation