Tenda AC15

From TechInfoDepot
Jump to navigationJump to search
abgn+ac (AC1900)
AC1900 Smart Dual Band Gigabit WiFi Router
Tenda AC15 Perfil.jpg
Homepage
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Gargoyle
Status Unknown
Platform
BrandModelRev
Tenda AC15
FCC ID
Board ID
10025031
Type
wireless router
CPU1
CPU1 Type
ARM Cortex-A9
CPU1 Speed
800 MHz ( 2 cores )
Flash1 Chip
Winbond GD25Q128
Flash1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Serial(SPI))
RAM1 Size
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (DDR3 SDRAM)
RAM1 Chip
EtronTech EM6GC16EWXD-12H
ETH chip1
Switch
Ethernet Port Count
1-1GbE-WAN
3-1GbE-LAN
Wired Standard
IEEE 802.3i/3u/3ab

802dot11 OUI: none specified

Stock bootloader
CFE
Stock FW OS
Linux
Expansion IF types
USB 3.0
USB ports
1
USB Hub Compatible
Untested
Power
12 VDC, 2.5 A
Connector type
barrel
Serial Port (UART)
yes, 4-pin header, (115200 8N1)
Flags:
high power

Additional chips
2.4GHz Power Amplifier IC;Richwave;RTC6649E;;3;
5GHz WLAN Front End Module;Skyworks;SKY85710-11;;3;

Other

Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 793 additional devices
of which 57 are Tenda devices

Manuf/OEM/ODM
3rd Party Firmware Support
Retail
FCC approval date 20 August 2015
UPC 885397270379
(UPC DB, On eBay)
Newegg N82E16833555059
ASIN B0143HBZMW Flag of the United States.svg
Country of manuf China
Radio 1
Chip1
Broadcom BCM4360
Wireless interface OUI
none specified
Antenna Connector Type
U.FL
MIMO status
3x3:3
Wireless Standard
IEEE 802.11b/g/n
N-QAM
up to 600 Mbps
802.11n
up to 450 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio cor_rev
40
Radio 2
Chip1
Broadcom BCM4360
Wireless interface OUI
none specified
Antenna Connector Type
U.FL
MIMO status
3x3:3
Wireless Standard
IEEE 802.11a/n/ac
802.11ac
up to 1300 Mbps
N-QAM
up to 600 Mbps
802.11n
up to 450 Mbps
802.11a
up to 54 Mbps
WiFi Operating Frequency
5 GHz
Radio cor_rev
40

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented Tenda device with specifications, see Tenda.

1300 Mbps - 3SS 5GHz 802.11ac (80MHz chan.),
600 Mbps - 3SS 2.4GHz 802.11n (40MHz chan., 256-QAM) = AC1900 class

Overview

"10025031" and "V1.1" is silkscreened on the board.

RAM Specs

EM6GC16EWXD - 128MB (64M x16)
EM6GE16EWXD - 512MB (256M x16)

Links of Interest

Reviews

Flashing

Flashing Tomato

https://www.linksysinfo.org/index.php?threads/tenda-ac15-ac1900-tomato-firmware-support.71709/post-268806

As of July 2017, the Tenda AC15 is supported by Fresh Tomato (download available here, go to the latest year -> the latest version -> K26ARM -> Tenda AC15). Many thanks to @kille72 and @marto12 for their hard work adding Tomato firmware support for this excellent router! There was a bug: Tomato can't seem to turn on the power amplifiers for the 5 GHz WiFi, which means that the signal strength is down -25 dB from expected (that's a measly 5.6% full power!). As of May 2020, this bug has been fixed.

To upgrade the firmware to Tomato (or restore the firmware back to Tenda OEM), you will need to use the router's CFE, because the two platforms use a different firmware format and will not accept each other's firmware files for an upgrade. Basically, you will need to:

  1. Connect an Ethernet cable between your PC and port 1 on the router.
  2. Set your PC to use a static IP address of 192.168.0.2 (instructions are here if you need them).
  3. If the router is on, turn it off. Find the reset hole at the top of the router and insert a paperclip to hold the reset button down. While holding reset down, power the router on.
  4. After about 25-30 seconds, the right-most LED (with the gear/settings symbol) should turn on. If it doesn't, you probably didn't hold the reset button down the whole time; go back to step 3 and try again.
  5. Release the reset button and go to your PC.
  6. Open http://192.168.0.1/ in a web browser to pull up the CFE screen.
  7. Use the CFE screen to upload the desired firmware binary file (Tomato or OEM). Some browsers may timeout before the firmware is fully loaded, and you'll get an error message instead of a message saying that the router is rebooting; just go back to step 6. If it fails again, perhaps try with Internet Explorer.
  8. Give the router about five minutes to upload, flash and reboot. It will look like nothing is happening. When the router reboots, all the lights will flash briefly. Once Tomato is up and running, the two WiFi LEDs will light up on the front of the router.
  9. At this point, click the Continue link (or reopen http://192.168.0.1/ in your web browser) to configure your new firmware. Default username and password are root & admin.
  10. As the Tenda settings are incompatible with Tomato, go to Administration -> Configuration -> Restore Default Configuration, select Erase all data in NVRAM memory and click [OK].
  11. Don't forget to re-set your PC to get its IP automatically when you're done! (Undo step 2.)


JTAG-Serial Info

Serial

Boot log
Digital core power voltage set to 0.9375V
Decompressing...done
Digital core power voltage set to 0.9375V

SHMOO VER 1.13

PKID07DC06011801080000000000001A103F01000000

S300001D3
00001340


RDLYW0 00000004

RDENW0 00000030

RDQSW0 

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 ---+++++++++++++++++++++++++X+++++++++++++++++++++++++----------
 01 ------++++++++++++++++++++++++++X+++++++++++++++++++++++++------
 02 ------++++++++++++++++++++++++++X+++++++++++++++++++++++++------
 03 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++---------
 04 -++++++++++++++++++++++++X++++++++++++++++++++++++--------------
 05 ----+++++++++++++++++++++++++X++++++++++++++++++++++++----------
 06 --++++++++++++++++++++++++X+++++++++++++++++++++++--------------
 07 -----+++++++++++++++++++++++++X++++++++++++++++++++++++---------
 08 ---++++++++++++++++++++++++X++++++++++++++++++++++++------------
 09 --------+++++++++++++++++++++++++X++++++++++++++++++++++++------
 10 ---+++++++++++++++++++++++++X++++++++++++++++++++++++-----------
 11 ------++++++++++++++++++++++++X+++++++++++++++++++++++----------
 12 ---++++++++++++++++++++++++X++++++++++++++++++++++++------------
 13 -------++++++++++++++++++++++++X++++++++++++++++++++++++--------
 14 ---+++++++++++++++++++++++++X++++++++++++++++++++++++-----------
 15 ------++++++++++++++++++++++++X++++++++++++++++++++++++---------


PW0 

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 --++++++++++++++++++++++++++X+++++++++++++++++++++++++----------
 01 -----++++++++++++++++++++++++++X++++++++++++++++++++++++++------
 02 ----++++++++++++++++++++++++++X++++++++++++++++++++++++++-------
 03 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++---------
 04 +++++++++++++++++++++++++X++++++++++++++++++++++++--------------
 05 ----+++++++++++++++++++++++++X++++++++++++++++++++++++----------
 06 +++++++++++++++++++++++++X++++++++++++++++++++++++--------------
 07 -----++++++++++++++++++++++++++X+++++++++++++++++++++++++-------
 08 ++++++++++++++++++++++++++X+++++++++++++++++++++++++------------
 09 ------++++++++++++++++++++++++++X+++++++++++++++++++++++++------
 10 ++++++++++++++++++++++++++X++++++++++++++++++++++++++-----------
 11 ---+++++++++++++++++++++++++X+++++++++++++++++++++++++----------
 12 --+++++++++++++++++++++++++X++++++++++++++++++++++++------------
 13 -----+++++++++++++++++++++++++X++++++++++++++++++++++++---------
 14 -+++++++++++++++++++++++++X+++++++++++++++++++++++++------------
 15 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++---------


NW0 

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 ---++++++++++++++++++++++++++X+++++++++++++++++++++++++---------
 01 ------++++++++++++++++++++++++++X+++++++++++++++++++++++++------
 02 -----+-++++++++++++++++++++++++++X+++++++++++++++++++++++++-----
 03 ----++++++++++++++++++++++++++X++++++++++++++++++++++++++-------
 04 +++++++++++++++++++++++++X++++++++++++++++++++++++--------------
 05 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++---------
 06 --+++++++++++++++++++++++++X++++++++++++++++++++++++------------
 07 -----+++++++++++++++++++++++++X++++++++++++++++++++++++---------
 08 ---+++++++++++++++++++++++++X++++++++++++++++++++++++-----------
 09 -------++++++++++++++++++++++++++X++++++++++++++++++++++++++----
 10 ----+++++++++++++++++++++++++X++++++++++++++++++++++++----------
 11 ------++++++++++++++++++++++++++X++++++++++++++++++++++++++-----
 12 ----+++++++++++++++++++++++++X++++++++++++++++++++++++----------
 13 ------++++++++++++++++++++++++++X+++++++++++++++++++++++++------
 14 ---+++++++++++++++++++++++++X++++++++++++++++++++++++-----------
 15 -----++++++++++++++++++++++++++X+++++++++++++++++++++++++-------


WRDQW0 

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 +++++++++++++++++++++X+++++++++++++++++++++-----------+++++++++-
 01 +++++++++++++++++++++++X+++++++++++++++++++++++----------++++++-
 02 +++++++++++++++++++++++X++++++++++++++++++++++---------++++++++-
 03 ++++++++++++++++++++++X+++++++++++++++++++++------------+++++++-
 04 ++++++++++++++++++++X++++++++++++++++++++------------++++++++++-
 05 ++++++++++++++++++++++X+++++++++++++++++++++-----------++++++++-
 06 ++++++++++++++++++++X++++++++++++++++++++------------++++++++++-
 07 ++++++++++++++++++++++X++++++++++++++++++++++-----------+++++++-
 08 ++++++++++++++++++++++X+++++++++++++++++++++-----------++++++++-
 09 ---++++++++++++++++++++++X+++++++++++++++++++++---------------+-
 10 +++++++++++++++++++++++X+++++++++++++++++++++++----------++++++-
 11 -+++++++++++++++++++++++X+++++++++++++++++++++++------------+++-
 12 ++++++++++++++++++++++X++++++++++++++++++++++----------++++++++-
 13 --++++++++++++++++++++++X++++++++++++++++++++++------------++++-
 14 +++++++++++++++++++++++X++++++++++++++++++++++----------+++++++-
 15 -+++++++++++++++++++++++X++++++++++++++++++++++-------------+++-


WRDMW0 00000021
WRDMW0 00000023


ADDR

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 +++++++++++++++++++S+++++++++++X++++++++++++++++++++++++++++++++

Decompressing...done
CJ++ for mspi get id 0xc8 0x17
CJ++ for mspi get id 0xc8 0x17
Found a ST compatible (Micron) serial flash with 256 64KB blocks; total size 16MB


CFE version 6.37.14.93 (r469350) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Tue Jul 21 11:41:28 CST 2015 (root@localhost.localdomain)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
Can't find nandflash! ccrev = 42, chipst= 0 
DDR Clock: 666 MHz
Warning: using legacy sdram_ncdl parameter to set DDR frequency. Equivalent setting in clkfreq=800,*0* will be ignored.
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.93 (r469350)
CPU type 0x0: 800MHz
Tot mem: 131072 KBytes

CFE mem:    0x00F00000 - 0x017A81D4 (9077204)
Data:       0x00F5F588 - 0x00F60C30 (5800)
BSS:        0x00F60C40 - 0x00FA61D4 (284052)
Heap:       0x00FA61D4 - 0x017A61D4 (8388608)
Stack:      0x017A61D4 - 0x017A81D4 (8192)
Text:       0x00F00000 - 0x00F53780 (341888)
Boot:       0x017A9000 - 0x017E9000
Reloc:      I:00000000 - D:00000000

Mac:**-**-**-**-**-** 
Device eth0:  hwaddr **-**-**-**-**-**, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
upgrade wait time is 3s
**upgrade_wait over!
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .... 4114848 bytes read
Entry at 0x00008000
Closing network.
Starting program at 0x00008000
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550
brd: module loaded
loop: module loaded
pflash: found no supported devices
bcmsflash: squash filesystem found at block 29
Creating 8 MTD partitions on "bcmsflash":
0x000000000000-0x000001000000 : "All"
0x000000000000-0x000000040000 : "Bootloader"
0x000000040000-0x000000fc0000 : "KernelFS"
0x0000001d8cdc-0x000000fc0000 : "RootFS"
0x000000fc0000-0x000000fd0000 : "Policy"
0x000000fd0000-0x000000fe0000 : "CFM_BACKUP"
0x000000fe0000-0x000000ff0000 : "CFM"
0x000000ff0000-0x000001000000 : "nvram"
nflash: found no supported devices
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
u32 classifier
    Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1961 buckets, 7844 max)
[BM CORE     ]  INFO: online ip data hash table created, size = 199
[BM CORE     ]  INFO: online_ip proc file created
ctnetlink v0.93: registering with nfnetlink.
 create /proc/behavior/emailbcc SUCCESSFULLY.
netfilter smtp init successfully
xt_time: kernel timezone is -0000
Kernel:Init flow dev success.
IPv4 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
L2TP core driver, V2.0
PPPoL2TP kernel driver, V2.0
L2TP IP encapsulation support (L2TPv3)
L2TP netlink interface
L2TP ethernet pseudowire support (L2TPv3)
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
brcmnand: found no supported devices
VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
devtmpfs: mounted
Freeing init memory: 216K
mkdir: can't create directory '/var/run': File exists
_fastnat_attach: fastnat attach is successful  register.
fastnat_init: FastNat_init successful .
[BM CORE     ]  INFO: bm_init success
bm_debug_init_proc success!
[U2K MODULE  ]  INFO: bm_u2k_info_init success
insmod: can't read '/lib/modules/ai.ko': No such file or directory
[MAC FILTER  ]  INFO: bm_mac_filter init success 
[QOS         ]  INFO: qos module init success
OS TYPE INIT FINISHED
[URL FILTER  ]  INFO: url filter init success
Give root password for system maintenance
(or type Control-D for normal startup):init_core_dump 1784: rlim_cur = 0, rlim_max = -1
init_core_dump 1794: open core dump success
init_core_dump 1803: rlim_cur = 5120, rlim_max = 5120
func:InitCfm begin load_mib....
flash_read:ret = 65536
crc = 7449093c, newcrc = 7449093c

######## STARTING PROGRAM #########
flash_read:ret = 65536
crc = 85006fc3, newcrc = 85006fc3
flash_read:ret = 65536
crc = 85006fc3, newcrc = 85006fc3
MTD[Policy] size is 64K 
read flash:uncompress len=240468; crc=0a2959c2
left wan[0]:0
right lan[3]:1
right lan[2]:2
right lan[1]:3
right lan[0]:4
vlan_array[0]: value 1  index_num 1 index[0] 0  index[1] 0  index[2] 0  index[3] 0  index[4] 0  
vlan_array[1]: value 0  index_num 4 index[0] 1  index[1] 2  index[2] 3  index[3] 4  index[4] 0  
vlan_array[2]: value -2  index_num 0 index[0] 0  index[1] 0  index[2] 0  index[3] 0  index[4] 0  
vlan_array[3]: value -2  index_num 0 index[0] 0  index[1] 0  index[2] 0  index[3] 0  index[4] 0  
vlan_array[4]: value -2  index_num 0 index[0] 0  index[1] 0  index[2] 0  index[3] 0  index[4] 0  
nvram unset vlan1ports
nvram unset vlan2ports
nvram unset vlan3ports
nvram unset vlan4ports
nvram unset vlan5ports
nvram set vlan2ports="0  5"
nvram set vlan1ports="1  2  3  4  5*"
#IPTV STB VLAN ID mode is disable!#
main=>100:init server success.1..
No need to start gpio thread.
et_module_init: passivemode set to 0x0
et_module_init: txworkq set to 0x1
et_module_init: et_txq_thresh set to 0x0
stbport=4=
eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.93 (r469350)
wl_module_init: passivemode set to 0x0
wl_module_init: txworkq set to 0x1
srom rev:0
--td_phy_status_init--
eth1: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.93 (r469350 WLTEST)
srom rev:0
--td_phy_status_init--
eth2: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.93 (r469350 WLTEST)
insmod: can't read '/lib/modules/2.6.36.4brcmarm/kernel/drivers/usb/class/usblp.ko': No such file or directory
Hello,This is the USB LED handling Driver
>>si_gpioreserve : 0xffffffff
>>si_gpiocontrol : 0x0
>>si_gpioouten : 0x4645
>>si_gpioout : 0x4600
ifconfig: SIOCSIFHWADDR: No such device
ifconfig: SIOCGIFFLAGS: No such device
### set br0 mac [**:**:**:**:**:**]### [5]
##############add vlan devices [vconfig add eth0 2]
##############add vlan devices [vconfig add eth0 1]
ifconfig: SIOCSIFHWADDR: No such device
Sun May  1 00:00:00 UTC 2011
Loading dnrd...
killall: dnrd: no process killed
_eval 98: child process create success
netctrl
_eval 98: child process create success
_start_time_check 202: time_check register success, register_pid = 509
_eval 94: child process status is 0
logserver.c check network 192.168.0.1 success
_start_httpd 219: httpd register success, register_pid = 510
time_check
_eval 94: child process status is 0
_start_multiwan 259: _start_multiwan register success, register_pid = 511
multiWAN
httpd
_eval 94: child process status is 0
_start_ucloud 288: ucloud register success, register_pid = 512
ucloud
init_core_dump 1784: rlim_cur = 5120, rlim_max = 5120
init_core_dump 1794: open core dump success
init_core_dump 1803: rlim_cur = 5120, rlim_max = 5120
�[1;32m[TIMER_CHECK >>time_check_reboot_info_printf(51)]:�[m		 enable:1
�[1;32m[TIMER_CHECK >>time_check_reboot_info_printf(52)]:�[m		 type:1
�[1;32m[TIMER_CHECK >>time_check_reboot_info_printf(57)]:�[m		 wday_en:1;1;1;1;1;1;1
�[1;32m[TIMER_CHECK >>time_check_reboot_info_printf(58)]:�[m		 start_time:03:00
�[1;32m[TIMER_CHECK >>time_check_reboot_info_printf(59)]:�[m		 end_time:05:00
�[1;32m[TIMER_CHECK >>time_check_reboot_info_printf(60)]:�[m		 max_speed:3
�[1;32m[TIMER_CHECK >>time_check_reboot_info_printf(61)]:�[m		 check_speed=3000
�[1;32m[TIMER_CHECK >>time_check_reboot_info_printf(62)]:�[m		 wan_ifnames:eth0.2
�[1;32m[TIMER_CHECK >>time_check_power_info_printf(48)]:�[m		 enable:0
�[1;32m[TIMER_CHECK >>time_check_power_info_printf(49)]:�[m		 type:1
�[1;32m[TIMER_CHECK >>time_check_power_info_printf(54)]:�[m		 wday_en:1;1;1;1;1;1;1
�[1;32m[TIMER_CHECK >>time_check_power_info_printf(55)]:�[m		 start_time:00:00
�[1;32m[TIMER_CHECK >>time_check_power_info_printf(56)]:�[m		 end_time:07:00
�[1;32m[TIMER_CHECK >>time_check_power_info_printf(57)]:�[m		 max_speed:3
�[1;32m[TIMER_CHECK >>time_check_power_info_printf(58)]:�[m		 check_speed=3000
init_core_dump 1784: rlim_cur = 5120, rlim_max = 5120
init_core_dump 1794: open core dump success
init_core_dump 1803: rlim_cur = 5120, rlim_max = 5120
init_core_dump 1784: rlim_cur = 5120, rlim_max = 5120
init_core_dump 1794: open core dump success
init_core_dump 1803: rlim_cur = 5120, rlim_max = 5120


Yes:

      ****** WeLoveLinux****** 

 Welcome to ...
old - soft: 5120, hard: 5120
old - soft: 4096000, hard: -1
not need to write flash,crc:[3b152f3c]
commit cfm failed or not need write flash
######## RECEIVING DATA #########
RTNETLINK answers: Operation not supported
sh: can't create /proc/br0_ip: nonexistent directory
[httpd][debug]----------------------------webs.c,157
httpd listen ip = 192.168.0.1 port = 80
webs: Listening for HTTP requests at address 192.168.0.1
max_new_conntrack=4000 
sh: nkgw: not found
Notice: caching turned off
Debug->tpi_port.c: tpi_port_handle(61)--type = 0
Debug->tpi_port.c: tpi_port_mode_set(12)--wan_num=1
Debug->tpi_port.c: tpi_port_mode_set(14)--wan[0].portmode=0
set port 0 to AUTO
�[1;32m[ DEBUG ] �[m******Sucessed to change lan config! ******
iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `dmz_forward_pre':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `vpnserver':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `dmz_forward_post':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
iptables: Index of insertion too big.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `port_forward_pre':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables v1.4.12.2: Couldn't load target `port_forward_post':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `web_wanadmin':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `web_wanadmin':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
killall: 3322ip: no process killed
killall: 88ip: no process killed
killall: gnway: no process killed
killall: phddns: no process killed
killall: inadyn: no process killed
rm: can't remove '/etc/ddns_*': No such file or directory
iptables: No chain/target/match by that name.
nbns task start:
arp task satrt:
iptables v1.4.12.2: Couldn't load target `MINIUPNPD':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
miniupnpd.c,865,ver=1.0,osname=Wireless Router,osver=1.0,osurl=http://192.168.0.1,manuft=Tenda,descri=
RTNETLINK answers: No such file or directory
dhcpsCfgToStruct 491: lan type is 
dhcps_lan_dhcpc_configure 251: lan dhcp client not get ip
Init gsbmac dev success.
The ARP attack defence is init v1 successful
killall: arpbrocast: no process killed
Kernel:Init attack fence dev success.
the ddos ip attack defnence init successful
SET_LAN_PARAM_DATA k_data:
	lan ip:3232235521
	lan mask:4294967040
	lan submask:3232235520
	lan interface:br0
	lan http port:80
icmset the proceee ture
p iSET_IPOP_FENCE_ATTACK_DATA k_data:
s 1	ip options:32512
,15SET_BAD_PKT_FENCE_ATTACK_DATA k_data:
00,	bad pkt:248
udpSET_DDOS_FENCE_ATTACK_DATA k_data:
 is	status:7
 1,	tcp threshold:1500
150	udp threshold:1500
0,t	icmp threshold:1500
cp_syn is 1,1500
---------->>[ start_wifi, wl_rate=24 ]
37919788
�[1;31m[ ERROR ] �[minvalid access mode:
killall: wps_monitor: no process killed
killall: nas: no process killed
killall: eapd: no process killed
�[1;32m[ DEBUG ] �[mlen=1,lan1_ifnames = 
�[1;31m[ ERROR ] �[mDo not exsit ifname of guest_network,do nothing!
iptables v1.4.12.2: Couldn't load target `icmp_drop':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
killall: acsd: no process killed
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
Error: argument "xmain" is wrong: invalid table ID

Error: argument "xmain" is wrong: invalid table ID

RTNETLINK answers: No such file or directory
RTNETLINK answers: No such file or directory
RTNETLINK answers: No such file or directory
RTNETLINK answers: No such file or directory
RTNETLINK answers: No such file or directory
iptables v1.4.12.2: Couldn't load target `access_ctrl':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
eth1: cmd=231: Invalid argument
eth1: WLC_SET_VAR(chanspec): Invalid argument
eth1: WLC_maxrssi=-100,int_val=-100
SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operatioset tenda auto width obss_coex:1
n not supported
eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(bg_rate): Operation not supported
eth1: WLC_SET_VAR(a_rate): Operation not supported
eth1: WLC_SET_VAR(bg_rate): Operation not supported
eth1: WLC_SET_VAR(a_rate): Operation not supported
eth1: WLC_SET_VAR(bg_mrate): Operation not supported
eth1: WLC_SET_VAR(a_mrate): Operation not supported
eth1: WLC_SET_VAR(bg_mrate): Operation not supported
eth1: WLC_SET_VAR(a_mrate): Operation not supported
eth1: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported
eth1: cmd=64: Operation not supported
eth2: WLC_GET_VAR(psta_if): Invalid argument
eth2: WLC_GET_VAR(psta_if): Invalid argument
eth2: WLC_GET_VAR(psta_if): Invalid argument
�[1;32m[ DEBUG ] �[mlen=1,lan1_ifnames = 
�[1;31m[ ERROR ] �[mDo not exsit ifname of guest_network,do nothing!
acsd: scan in progress ...
acsd: scan in progress ...
mdns task start:
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: selected channel spec: 0x1906
eth2: WLC_GET_VAR(bw_cap): Invalid argument
ACSD >>acs_get_rs_info(1209): failed to get bw_capret code: -1
ACSD >>acs_build_scanlist(508): number of valid chanspec is 0
ACSD >>acs_scan_prep(588): failed to build scan chanspec listret code: -1
ACSD >>acs_run_cs_scan(682): failed to do scan prepret code: -1
ACSD >>acs_start(1655): cs scan failed
ret code: -1
ACSD >>acs_init_run(2803): acs_start fwisp or APC is close 
ailed for ifname: eth2
[ Message ]------msgsnd--------[ ucloud ][ 721623, 65538 ]
[ Message ]------msgsnd--------[ ucloud, 1 ]
---------->>[ start_wifi, wl_rate=5 ]
[ Message ]------msgrcv--------[ ucloud ][ 721623 / 65538 ]
[ Message ]------msghdl--------[ ucloud / 1 ]
37919788
�[1;31m[ ERROR ] �[minvalid access mode:
�[1;31m[ ERROR ] �[mcoutry_code=US
�[1;32m[ DEBUG ] �[mlen=1,lan1_ifnames = 
�[1;31m[ ERROR ] �[mDo not exsit ifname of guest_network,do nothing!
eth2: cmd=231: Invalid argument
eth2: WLC_SET_VAR(chanspec): Invalid argument
eth2: WLmaxrssi=-100,int_val=-100
C_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(bg_rate): Operation not supported
eth2: WLC_SET_VAR(a_rate): Operation not supported
eth2: WLC_SET_VAR(bg_rate): Operation not supported
eth2: WLC_SET_VAR(a_rate): Operation not supported
eth2: WLC_SET_VAR(bg_mrate): Operation not supported
eth2: WLC_SET_VAR(a_mrate): Operation not supported
eth2: WLC_SET_VAR(bg_mrate): Operation not supported
eth2: WLC_SET_VAR(a_mrate): Operation not supported
eth2: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported
eth2: cmd=64: Operation not supported
device br1 already exists; can't create bridge with the same name
�[1;32m[ DEBUG ] �[mlen=1,lan1_ifnames = 
�[1;31m[ ERROR ] �[mDo not exsit ifname of guest_network,do nothing!
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
###fd failed to recv packet!###
##### NO SERVER FOUND! #####
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: selected channel spec: 0x1809
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: selected channel spec: 0xe39b
wisp or APC is close 
[ Message ]------msgsnd--------[ ucloud ][ 721623, 65538 ]
[ Message ]------msgsnd--------[ ucloud, 1 ]
msg str: [cfm Post time_check 4?relate_module_id=19,string_info=first_time_start]
[ Message ]------msgrcv--------[ ucloud ][ 721623 / 65538 ]
[ Message ]------msghdl--------[ ucloud / 1 ]
[ Message ]------msgsnd--------[ time_check ][ 721604, 32769 ]
[ Message ]------msgsnd--------[ time_check, 4?relate_module_id=19,string_info=first_time_start ]
[ Message ]------msgrcv--------[ time_check ][ 721604 / 32769 ]
[ Message ]------msghdl--------[ time_check / 4?relate_module_id=19,string_info=first_time_start ]
�[1;31m[TIMER_CHECK >>TimeCheckMsgHandle(163)]:�[mmsg:4?relate_module_id=19,string_info=first_time_start
�[1;31m[TIMER_CHECK >>init_time_check_module_var(146)]:�[mkey = relate_module_id,value = 19
�[1;31m[TIMER_CHECK >>init_time_check_module_var(154)]:�[mkey = string_info,value = first_time_start
tpi_sntp_handle(44): start sntp...
tpi_set_user_policy,35: entry count:0
systime_server = 211.138.200.208
main,334,sntp_en =1,tz=7.00,checktime=86400
�[1;32m[ DEBUG ] �[mlan dhcp not enable
get_first_mount_disk 136 /var/cache/.dlnacache
Open /tmp/UDiskname is FailDisk:the file was locked.
Writesamba.config.bak OK!
Disk:/tmp/samba/lib/samba.config.bak the file was unlocked.
******* unlink /tmp/smbpasswd is fail 
startsmbfilepwent_internal: file /tmp/samba/private/smbpasswd did not exist. File successfully created.
account_policy_get: tdb_fetch_uint32 failed for field 1 (min password length), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 2 (password history), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 3 (user must logon to change password), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 4 (maximum password age), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 5 (minimum password age), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 6 (lockout duration), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 7 (reset count minutes), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 8 (bad lockout attempt), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 9 (disconnect time), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 10 (refuse machine password change), returning 0
Added user admin.

Pictures

Retail Images

Notes

Features

  • Ultimate 11ac speed of up to 1900Mbps, delivering both 1300Mbps
(802.11ac) at 5GHz and 600Mbps (802.11n) at 2.4 GHz concurrently
  • Broadcom dual-core processor with DDR3 memory for multi-client
with responsive performance and fast speed
  • Beamforming+ technology boosts range for 802.11ac WiFi devices
  • High powered amplifiers and three external antennas for coverage
  • USB3.0 for personal secure cloud and printer sharing.
  • Smart managements of WiFi schedule, LED indicator
and power saving all are for your healthy E-life

Hardware Specs

  • Standard Protocol: 802.11bgn (2.4GHz), 802.11an/ac (5GHz)
  • Interface: 1x GbE WAN port, 3x GbE LAN ports, 1x USB3.0 port
  • Transmission Rate: up to 1900Mbps (1300+600Mbps)
2.4GHz: up to 600Mbps, 5GHz: up to 1300Mbps
  • Frequency: works over 2.4GHz and 5GHz concurrently
  • Antenna: 3x 3dBi external dual band antennas
  • Security: WPA-PSK/WPA2-PSK, WPA/WPA2,
Wireless Security: Enable/Disable, WPS
  • Internet Connection Type: Dynamic IP, Static IP, PPPoE
  • Operating Mode: Wireless router, Universal repeater, WISP mode
  • VPN Pass-through: PPTP server, PPTP client, L2TP client,
L2TP pass through, IPsec pass through, PPTP pass through
  • USB Sharing: Samba, FTP Server, Media Server, Printer Server
  • Other Function: Smart WiFi Schedule, Smart Power Saving,
Smart LED on/off , Tenda Cloud, Tenda App
  • LED: Power, Internet, LAN, 5GHz, 2.4G, WPS, USB, SYS
  • Button: Power on/off, WiFi on/off, Reset button, WPS button
  • Default Settings: Default Access: tendawifi.com
  • Power Input: AC 100-240V ~50/60Hz 0.3A
Power Output: DC 12V/2.5A
  • Dimension: 226 x 180 x 76 mm