Teleadapt Deskpoint Wireless 1 (TA-6900)

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
bg (G54)
DeskPoint Wireless Version 1.0
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
Teleadapt Deskpoint Wireless v1
Model Part Number
TA-6900
FCC ID
Type
access point
CPU1
Samsung S3C2510A
CPU1 Type
ARM 940T
CPU1 Speed
166 MHz
Flash1 Chip
Brand? Model?
Flash1 Size
? MiB
RAM1 Size
? MiB
RAM1 Chip
EtronTech Model?
ETH chip1
Samsung S3C2510A
ETH chip2
IC+ IP101A
ETH chip3
IC+ IP101A
Ethernet Port Count
1-100MbE-WAN
1-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: 00:09:92 (1 E, 1 W)
Ethernet OUI: 00:09:92 (1 E, 1 W)

Expansion IF types
Mini PCI
Mini PCI slots
1
Power
5 VDC, 2 A
Connector type
non-standard
Other
Manuf/OEM/ODM
Interepoch
Retail
FCC approval date 09 November 2006
Country of manuf China
Radio 1
Radio1 module
Radio1 module IF
Mini PCI
Chip1
Ralink RT2561
Chip2
Ralink RT2527
Wireless interface OUI
00:09:92
Antenna Connector Type
U.FL
Wireless Standard
IEEE 802.11b/g
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
Teleadapt Deskpoint Wireless 1 (TA-6900)SamsungRalinkRalink
Teleadapt Deskpoint Wireless 2 (TA-6950 / TA-7950 / TA-8050)RealtekRealtek

For a list of all currently documented IC+ chipsets with specifications, see IC+.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented Samsung chipsets with specifications, see Samsung.

54 Mbps - 2.4GHz 802.11g = G54 class

Overview

The device is marketed towards usage in hotels as an in-room access point.

"WL-APE06-03" is silkscreened on the main board in the FCC photos.

"WM233L" and "41713-84104-B" is silkscreened on the wireless module.. indicating it is (likely) a PESI WM233L. A MAC label affixed to the card in the internal photos has an 00:0E:8E (SparkLAN) OUI.

The CPU used is presumed to be a S3C2510A. The two 10/100 PHYs appear to be IP101As..

The default SSID may be wireless (.. it is the value in the rather generic FCC manual) or deskpoint (used by the v2).