TRENDnet TEW-753DAP

abgn (AN600)
N600 High Power Dual Band PoE Access Point
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	TRENDnet TEW-753DAP
FCC ID	XU8TEW753DAP
Type	access point
CPU1	Atheros AR9344
CPU1 Type	MIPS 74Kc
CPU1 Speed	560 MHz 32-bit
Flash1 Chip	Macronix MX25L12845EMI-10G
Flash1 Size	16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size	128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Chip	Nanya NT5TU32M16DG-AC
ETH chip1	Atheros AR9344
ETH chip2	Atheros AR8035-A
Ethernet Port Count	1-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: none specified
Expansion IF types	none specified
PoE	802.3af, standard
Power	12 VDC, 1.5 A
Connector type	barrel
Serial Port (UART)	yes, 3.3V TTL
Additional chips 2.4GHz Power Amplifier IC;Microchip;SST12LP15A;SST, 12LP15A, 152A5M;2;InGaP/GaAs HBT;16-pin VQFN; 5GHz Power Amplifier IC;SiGe;SE2537L;SiGe, 2537L, <????>;2;;16-pin QFN;3 mm x 3 mm x 0.9 mm;
Other
Default SSID: TRENDnet753_2.4GHz_XXXX , TRENDnet753_5GHz_XXXX
Manuf/OEM/ODM	Senao
Retail
FCC approval date	13 September 2013
Country of manuf	Taiwan
Radio 1
Chip1	Atheros AR9344
Wireless interface OUI	none specified
Antenna Connector Type	U.FL
MIMO status	2x2:2
Wireless Standard	IEEE 802.11a/n
802.11n	up to 300 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz
Radio 2
Chip1	Atheros AR9382
Wireless interface OUI	none specified
Antenna Connector Type	U.FL
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

For a list of all currently documented TRENDnet device with specifications, see TRENDnet.

• 300 Mbps - 2SS 5GHz 802.11n (40MHz chan.),

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AN600 class

Overview

"7016A0507001 Ver: 1.00" is silkscreened on the board in the FCC photos. This is the same text found on the Senao CAP4200AG and derivative models.

The 2.4GHz radio (AR9382-AL1) is using two Microchip (SST) SST12LP15A power amplifier ICs (marked "SST", "12LP15A", "152ASM").

The 5GHz radio (AR9344-BC2A) is using two Skyworks (SiGe) SE2537L / 2537L power amplifier ICs.

The Flash chip appears to be a MX25L12845EMI-10G (16 MB).

The power adapter in the FCC photos is a Powertron ELectronics Corp. PA1015-2I (100-240VAC ~ 50-60Hz, 0.4A -> 12VDC, 1.25A).