TRENDnet TEW-714TRU
From TechInfoDepot
Jump to navigationJump to searchbgn (N150) | |||||
---|---|---|---|---|---|
N150 Wireless Travel Router | |||||
3rd Party Firmware | |||||
dd-wrt |
Status Unknown | ||||
OpenWrt | |||||
Tomato any flavor |
Incompatible | ||||
Gargoyle |
Status Unknown | ||||
Platform | |||||
Brand • Model • Rev |
TRENDnet TEW-714TRU V1.0R | ||||
FCC ID | |||||
Type |
travel router | ||||
CPU1 |
Ralink RT5350 | ||||
CPU1 Type |
MIPS 24KEc | ||||
CPU1 Speed |
360 MHz | ||||
Flash1 Chip |
Brand? Model? | ||||
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||
RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||
RAM1 Chip |
Winbond Model? | ||||
ETH chip1 |
Ralink RT5350 | ||||
Ethernet Port Count |
1-100MbE-LAN | ||||
Wired Standard |
IEEE 802.3i/3u | ||||
802dot11 OUI: none specified | |||||
Stock bootloader |
U-Boot | ||||
Expansion IF types |
USB 2.0 | ||||
USB ports |
1 | ||||
USB Hub Compatible |
Untested | ||||
Power |
100-240 VAC ~ 50/60 Hz, ? A | ||||
Connector type |
NEMA 1-15P | ||||
Other | |||||
| |||||
3rd Party Firmware Support | |||||
Retail | |||||
FCC approval date | 18 April 2013 | ||||
UPC |
710931130072 (UPC DB, On eBay) | ||||
ASIN | B00FEE7LW2 | ||||
Country of manuf | China | ||||
Radio 1 | |||||
Chip1 |
Ralink RT5350 | ||||
Wireless interface OUI |
none specified | ||||
Antenna Connector Type |
none specified | ||||
MIMO status |
1x1:1 | ||||
Wireless Standard |
IEEE 802.11b/g/n | ||||
802.11n |
up to 150 Mbps | ||||
802.11g |
up to 54 Mbps | ||||
802.11b |
up to 11 Mbps | ||||
WiFi Operating Frequency |
2.4 GHz | ||||
|
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented TRENDnet device with specifications, see TRENDnet.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
The FCC ID for this device covers both the TRENDnet TEW-713RE and the TRENDnet TEW-714TRU.
This particular unit also has a USB charging-only port (as well as one standard USB 2.0 port).
"7018N-A107-03" is silkscreened on the board in the FCC photos.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 17.01.0
Current supported version: 22.03.7
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 17.01.0
Current supported version: 22.03.7
Please insert instructions here