TP-LINK TL-WDN3200
From TechInfoDepot
Jump to navigationJump to searchabgn (AN600) | |
---|---|
N600 Wireless Dual Band USB Adapter | |
Homepage | |
Downloads | |
WikiDevi.wi-cat.ru | |
Platform | |
Brand • Model • Rev |
TP-LINK TL-WDN3200 v1 |
Interface |
USB 2.0 |
Connector |
Male A |
Form factor |
dongle |
FCCID | |
ICID | |
Board ID |
1108012300-1.0 |
Chip1 |
Ralink RT5572 |
Antenna Connection |
SWD |
MIMO status |
2x2:2 |
Wireless Standards |
IEEE 802.11a/b/g/n |
802.11n |
up to 300/300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
802.11a |
up to 54 Mbps |
Operating Frequency |
2.4 or 5 GHz |
Probable Linux driver | |
Windows driver | |
Retail | |
Availability | End of Life |
FCC approval date | 02 October 2012 |
UPC |
845973050665 (UPC DB, On eBay) |
EAN |
6935364050665 (UPC DB, On eBay) |
ASIN | B007ZWL1ZE |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented TP-LINK device with specifications, see TP-LINK.
Overview
"1108012300-1.0" and "Rev:1.0sp1" is silkscreened on the board in the FCC photos.
- There is only one ID in the driver (148f:5572 / USB\VID_148F&PID_5572).
The device may (possibly) be known as the TL-WDN3321 in Asian markets.
- Indicated required USB power: 450 mA
- Wi-Fi Certified : WFA15926 (as of 07/12/2012)
- On Product Version 1.2, Chip: Ralink RT5572N (datecode 1424), kernel 13.3:
Pictures
Notes
dmesg
[18688.329911] usb 1-1.2: new high-speed USB device number 7 using ehci-pci [18688.438319] usb 1-1.2: New USB device found, idVendor=148f, idProduct=5572 [18688.438326] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [18688.438331] usb 1-1.2: Product: 802.11 n WLAN [18688.438334] usb 1-1.2: Manufacturer: Ralink [18688.438337] usb 1-1.2: SerialNumber: 1.0 [18688.545636] usb 1-1.2: reset high-speed USB device number 7 using ehci-pci [18688.646725] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected [18688.675286] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 000f detected [18688.676016] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht' [18688.676515] usbcore: registered new interface driver rt2800usb [18688.709514] systemd-udevd[6670]: renamed network interface wlan1 to wlan14 [18688.715588] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [18688.715820] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
iw list • >> |
---|
Wiphy phy2 Band 1: Capabilities: 0x2f2 HT20/HT40 Static SM Power Save RX Greenfield RX HT20 SGI RX HT40 SGI TX STBC RX STBC 2-streams Max AMSDU length: 3839 bytes No DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 2 usec (0x04) HT RX MCS rate indexes supported: 0-15, 32 TX unequal modulation not supported HT TX Max spatial streams: 2 HT TX MCS rate indexes supported may differ Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) * 2437 MHz [6] (20.0 dBm) * 2442 MHz [7] (20.0 dBm) * 2447 MHz [8] (20.0 dBm) * 2452 MHz [9] (20.0 dBm) * 2457 MHz [10] (20.0 dBm) * 2462 MHz [11] (20.0 dBm) * 2467 MHz [12] (20.0 dBm) (passive scanning, no IBSS) * 2472 MHz [13] (20.0 dBm) (passive scanning, no IBSS) * 2484 MHz [14] (20.0 dBm) (passive scanning, no IBSS) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps Band 2: Capabilities: 0x2f2 HT20/HT40 Static SM Power Save RX Greenfield RX HT20 SGI RX HT40 SGI TX STBC RX STBC 2-streams Max AMSDU length: 3839 bytes No DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 2 usec (0x04) HT RX MCS rate indexes supported: 0-15, 32 TX unequal modulation not supported HT TX Max spatial streams: 2 HT TX MCS rate indexes supported may differ Frequencies: * 5180 MHz [36] (20.0 dBm) (passive scanning, no IBSS) * 5190 MHz [38] (20.0 dBm) (passive scanning, no IBSS) * 5200 MHz [40] (20.0 dBm) (passive scanning, no IBSS) * 5210 MHz [42] (20.0 dBm) (passive scanning, no IBSS) * 5220 MHz [44] (20.0 dBm) * 5230 MHz [46] (20.0 dBm) (passive scanning, no IBSS) * 5240 MHz [48] (20.0 dBm) (passive scanning, no IBSS) * 5250 MHz [50] (disabled) * 5260 MHz [52] (disabled) * 5270 MHz [54] (disabled) * 5280 MHz [56] (disabled) * 5290 MHz [58] (disabled) * 5300 MHz [60] (disabled) * 5310 MHz [62] (disabled) * 5320 MHz [64] (disabled) * 5500 MHz [100] (disabled) * 5510 MHz [102] (disabled) * 5520 MHz [104] (disabled) * 5530 MHz [106] (disabled) * 5540 MHz [108] (disabled) * 5550 MHz [110] (disabled) * 5560 MHz [112] (disabled) * 5570 MHz [114] (disabled) * 5580 MHz [116] (disabled) * 5590 MHz [118] (disabled) * 5600 MHz [120] (disabled) * 5610 MHz [122] (disabled) * 5620 MHz [124] (disabled) * 5630 MHz [126] (disabled) * 5640 MHz [128] (disabled) * 5650 MHz [130] (disabled) * 5660 MHz [132] (disabled) * 5670 MHz [134] (disabled) * 5680 MHz [136] (disabled) * 5690 MHz [138] (disabled) * 5700 MHz [140] (disabled) * 5745 MHz [149] (20.0 dBm) (passive scanning, no IBSS) * 5755 MHz [151] (20.0 dBm) (passive scanning, no IBSS) * 5765 MHz [153] (20.0 dBm) (passive scanning, no IBSS) * 5775 MHz [155] (20.0 dBm) (passive scanning, no IBSS) * 5785 MHz [157] (20.0 dBm) (passive scanning, no IBSS) * 5795 MHz [159] (20.0 dBm) (passive scanning, no IBSS) * 5805 MHz [161] (20.0 dBm) (passive scanning, no IBSS) * 5825 MHz [165] (20.0 dBm) (passive scanning, no IBSS) * 4920 MHz [-16] (disabled) * 4940 MHz [-12] (disabled) * 4960 MHz [-8] (disabled) * 4980 MHz [-4] (disabled) Bitrates (non-HT): * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 max scan IEs length: 2257 bytes Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) Available Antennas: TX 0 RX 0 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point software interface modes (can always be added): * AP/VLAN * monitor valid interface combinations: * #{ AP, mesh point } <= 8, total <= 8, #channels <= 1 Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * set_tx_bitrate_mask * action * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * Unknown command (84) * Unknown command (87) * Unknown command (85) * Unknown command (89) * Unknown command (92) * connect * disconnect Supported TX frame types: * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * Unknown mode (10): 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 Supported RX frame types: * IBSS: 0x40 0xb0 0xc0 0xd0 * managed: 0x40 0xd0 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * mesh point: 0xb0 0xc0 0xd0 * P2P-client: 0x40 0xd0 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * Unknown mode (10): 0x40 0xd0 Device supports RSN-IBSS. HT Capability overrides: * MCS: ff ff ff ff ff ff ff ff ff ff * maximum A-MSDU length * supported channel width * short GI for 40 MHz * max A-MPDU length exponent * min MPDU start spacing Device supports TX status socket option. Device supports HT-IBSS. |
lsusb -vv -n 148f:5572 • >> |
---|
Bus 001 Device 008: ID 148f:5572 Ralink Technology, Corp. RT5572 Wireless Adapter Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x148f Ralink Technology, Corp. idProduct 0x5572 RT5572 Wireless Adapter bcdDevice 1.01 iManufacturer 1 Ralink iProduct 2 802.11 n WLAN iSerial 3 1.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 53 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 450mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 5 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 5 1.0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) |