TP-LINK TD-W8968 v3
bgn (N300) | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
300Mbps Wireless N USB ADSL2+ Modem Router | |||||||||||||||||
Wikipedia | |||||||||||||||||
3rd Party Firmware | |||||||||||||||||
dd-wrt |
Status Unknown | ||||||||||||||||
OpenWrt | |||||||||||||||||
Tomato any flavor |
Status Unknown | ||||||||||||||||
Gargoyle |
Status Unknown | ||||||||||||||||
Platform | |||||||||||||||||
Brand • Model • Rev |
TP-LINK TD-W8968 v3 | ||||||||||||||||
FCC ID | |||||||||||||||||
IC ID | |||||||||||||||||
Board ID |
2011500158 | ||||||||||||||||
Type |
wireless router, dsl modem | ||||||||||||||||
Series |
TD-W8968 | ||||||||||||||||
CPU1 |
Broadcom BCM6318 | ||||||||||||||||
CPU1 Type |
MIPS BMIPS3300 | ||||||||||||||||
CPU1 Speed |
333 MHz | ||||||||||||||||
Flash1 Chip |
Macronix Model? | ||||||||||||||||
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (SPI) | ||||||||||||||||
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> | ||||||||||||||||
RAM1 Chip |
EtronTech Model? | ||||||||||||||||
ETH chip1 |
Broadcom BCM6318 | ||||||||||||||||
Switch |
Broadcom BCM6318 | ||||||||||||||||
Ethernet Port Count |
4-100MbE-LAN | ||||||||||||||||
Wired Standard |
IEEE 802.3i/3u | ||||||||||||||||
Stock bootloader |
CFE | ||||||||||||||||
Expansion IF types |
USB 2.0 | ||||||||||||||||
USB ports |
1 | ||||||||||||||||
USB Hub Compatible |
Untested | ||||||||||||||||
Power |
12 VDC, 1 A | ||||||||||||||||
Connector type |
barrel | ||||||||||||||||
Serial Port (UART) |
yes, 3.3, (115200 8N1) | ||||||||||||||||
JTAG Port |
no | ||||||||||||||||
Flags: ADSL2+ | |||||||||||||||||
Other | |||||||||||||||||
Default IP address: 192.168.1.1 | |||||||||||||||||
Manuf/OEM/ODM | |||||||||||||||||
3rd Party Firmware Support | |||||||||||||||||
Retail | |||||||||||||||||
Availability | End of Life | ||||||||||||||||
End of Life date | 2017 | ||||||||||||||||
FCC approval date | 19 May 2014 | ||||||||||||||||
ASIN | B008I3GCNU | ||||||||||||||||
Country of manuf | China | ||||||||||||||||
Radio 1 | |||||||||||||||||
Chip1 |
Broadcom BCM43217 | ||||||||||||||||
Wireless interface OUI |
14:CC:20 | ||||||||||||||||
Antenna Connector Type |
RP-SMA | ||||||||||||||||
MIMO status |
2x2:2 | ||||||||||||||||
Wireless Standard |
IEEE 802.11b/g/n | ||||||||||||||||
802.11n |
up to 300 Mbps | ||||||||||||||||
802.11g |
up to 54 Mbps | ||||||||||||||||
802.11b |
up to 11 Mbps | ||||||||||||||||
WiFi Operating Frequency |
2.4 GHz | ||||||||||||||||
Radio cor_rev |
24 | ||||||||||||||||
|
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented TP-LINK device with specifications, see TP-LINK.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
"2011500158" and the TP-LINK logo is silkscreened
- on the board in the FCC photos.
Specifications
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
DSL will not work at all on devices with BCM63xx DSL chipset (due to unavailability of FLOSS driver for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom DSL, Unsupported: DSL modem and Broadcom BCM63xx for details. |
The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details. |
On the OpenWrt Wiki
OpenWrt Target: bmips
OpenWrt Subtarget: bcm6318
OpenWrt Package architecture: mips_mips32
Support started version: 17.01.0
Current supported version: snapshot
Unsupported Functions:
DSL modem, WiFi 2.4GHz partly
Please insert instructions here
See also
- TP-LINK
- Embedded system/wireless router
- Embedded system/dsl modem
- Embedded System Broadcom
- Embedded System BCM6318
- Broadcom
- Embedded System MIPS
- Embedded System BMIPS3300
- Manuf TP-LINK
- OpenWrt Supported
- Embedded System BCM43217
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Embedded System
- English Documentation