TP-LINK RE210

From TechInfoDepot
Jump to navigationJump to search
abgn+ac (AC750)
AC750 Wireless Range Extender
Homepage
Wikipedia
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
TP-LINK RE210
FCC ID
Type
range extender
CPU1
CPU1 Type
MIPS 24KEc
CPU1 Speed
580 MHz 32-bit
Flash1 Chip
Winbond W25Q64FVSIG
Flash1 Size
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip
Zentel A3R12E40CBF-8E
ETH chip1
ETH chip2
Atheros AR8035-A
Ethernet Port Count
1-1GbE-LAN
Wired Standard
IEEE 802.3i/3u/3ab

802dot11 OUI: none specified

Stock bootloader
U-boot 4.1.0.0 Ralink
Stock FW OS
Linux 2.6.36
Expansion IF types
none specified
Power
100-240 VAC ~ 50/60 Hz, 0.3 A
Connector type
AC (direct)
Serial Port (UART)
yes, 4-pin header
Other

Default SSID: TP-LINK_Extender_2.4GHz (13 addl. devices)
, TP-LINK_Extender_5GHz (13 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 793 additional devices
of which 97 are TP-LINK devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1330 additional devices
of which 278 are TP-LINK devices

Manuf/OEM/ODM
Retail
FCC approval date 24 August 2015
ASIN B00TQD2BYK Flag of the United States.svg
Country of manuf China
Radio 1
Chip1
Wireless interface OUI
none specified
Antenna Connector Type
U.FL
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio 2
Chip1
MediaTek MT7610EN
Wireless interface OUI
none specified
Antenna Connector Type
U.FL
MIMO status
1x1:1
Wireless Standard
IEEE 802.11a/n/ac
802.11ac
up to 433 Mbps
802.11n
up to 150 Mbps
802.11a
up to 54 Mbps
WiFi Operating Frequency
5 GHz

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented TP-LINK device with specifications, see TP-LINK.

433 Mbps - 1SS 5GHz 802.11ac (80MHz chan.),
300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AC750 class


Overview

"2053500117" is silkscreened on the board in the FCC photos.

Hardware appears to be very similar to the Netgear EX6100.

Unit has internal power supply and plugs directly into mains power socket.

Stock firmware only functions as an extender and client bridge and does

not support access point mode.

Basic details

To get the unit open, remove the two screws at the top. Squeeze the case in the middle

of each side t help loosen the two clips that continue to hold it together.

It takes some force to separate the two halves, but be careful not to damage the short

the antenna cables when the case finally gives.

There is a ceramic heatsink on the CPU - you can remove this to inspect it by giving

it a twist. It will remain adhesive so can be re-attached when finished.

Links of Interest

Reviews

JTAG-Serial Info

Serial

Serial Pinouts

  • J1 is a serial header. Pin 1 is closest to the top
of the unit and pin 4 closest to the Ethernet port.

The pinout is as follows:

© 1 - Tx
© 2 - Rx
© 3 - Gnd
® 4 - Vcc

Connect with settings 57600 8N1. Signalling voltage is 3.3v.


Console output

Boot log
U-Boot 1.1.3 (Jun 29 2015 - 14:29:26)

Board: Ralink APSoC DRAM:  64 MB
relocate_code Pointer at: 83fb4000
enable ephy clock...done. rf reg 29 = 5
SSC disabled.
spi_wait_nsec: 29 
spi device id: ef 40 17 0 0 (40170000)
find flash: W25Q64BV
============================================ 
Ralink UBoot Version: 4.1.0.0
This UBoot has been rewritten by TPLINK *_*
-------------------------------------------- 
ASIC 7620_MP (Port5<->Phy)
DRAM component: 512 Mbits DDR, width 16
DRAM bus: 16 bit
Total memory: 64 MBytes
Flash component: SPI Flash
Date:Jun 29 2015  Time:14:29:26
============================================ 
icache: sets:512, ways:4, linesz:32 ,total:65536
dcache: sets:256, ways:4, linesz:32 ,total:32768 

 ##### The CPU freq = 580 MHZ #### 
 estimate memory size =64 Mbytes

Please choose the operation: 
   1: Load system code to SDRAM via TFTP. 
   2: Load system code then write to Flash via TFTP. 
   3: Boot system code via Flash (default).
   4: Entr boot command line interface.
   6: Load ART data then write to Flash via TFTP.
   7: Load Boot Loader code then write to Flash via Serial. 
   9: Load Boot Loader code then write to Flash via TFTP. 
 0

3: System Boot system code via Flash.
## Booting image at bc020000 ...
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 8000c310) ...
## Giving linux memsize in MB, 64

Starting kernel ...
LINUX started...

 THIS IS ASIC
Linux version 2.6.36+ (canjchen@ubuntu2ccj) 
(gcc version 3.4.2) #2 Mon Jun 29 14:31:06 CST 2015

 The CPU feqenuce set to 580 MHz
 MIPS CPU sleep mode enabled.
 PCIE: bypass PCIe DLL.
 PCIE: Elastic buffer control: Addr:0x68 -> 0xB4
 disable all power about PCIe
CPU revision is: 00019650 (MIPS 24Kc)
Determined physical RAM map:
 memory: 04000000 @ 00000000 (usable)
Zone PFN ranges:
  Normal   0x00000000 -> 0x00004000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00004000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock3 
 rw rootfstype=squashfs init=/sbin/init console=ttyS0
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Writing ErrCtl register=0006f7aa
Readback ErrCtl register=0006f7aa
Memory: 62164k/65536k available 
(2016k kernel code, 3372k reserved, 449k data, 144k init, 0k highmem)
NR_IRQS:128
MTK/Ralink System Tick Counter init... cd:80259da8, m:214748, s:32
console [ttyS1] enabled
Calibrating delay loop... 386.04 BogoMIPS (lpj=772096)
pid_max: default: 4096 minimum: 301
Mount-cache hash table entries: 512
NET: Registered protocol family 16
RALINK_GPIOMODE = 1a321d
RALINK_GPIOMODE = 18321d
PPLL_CFG1=0xe64000
MT7620 PPLL lock
PPLL_DRV =0x80080504
start PCIe register access
RALINK_PCI_PCICFG_ADDR = 1000f0

*************** MT7620 PCIe RC mode *************
bio: create slab <bio-0> at 0
pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff]
pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
pci 0000:00:00.0: BAR 1: set to [mem 0x20200000-0x2020ffff] (PCI address [0x20200000-0x2020ffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff]
pci 0000:01:00.0: BAR 0: set to [mem 0x20000000-0x200fffff] (PCI address [0x20000000-0x200fffff]
pci 0000:01:00.1: BAR 0: assigned [mem 0x20100000-0x201fffff]
pci 0000:01:00.1: BAR 0: set to [mem 0x20100000-0x201fffff] (PCI address [0x20100000-0x201fffff]
pci 0000:00:00.0: PCI bridge to [bus 01-01]
pci 0000:00:00.0:   bridge window [io  disabled]
pci 0000:00:00.0:   bridge window [mem 0x20000000-0x201fffff]
pci 0000:00:00.0:   bridge window [mem pref disabled]
BAR0 at slot 0 = 0
bus=0x0, slot = 0x0
res[0]->start = 0
res[0]->end = 0
res[1]->start = 20200000
res[1]->end = 2020ffff
res[2]->start = 0
res[2]->end = 0
res[3]->start = 0
res[3]->end = 0
res[4]->start = 0
res[4]->end = 0
res[5]->start = 0
res[5]->end = 0
bus=0x1, slot = 0x0
res[0]->start = 20000000
res[0]->end = 200fffff
res[1]->start = 0
res[1]->end = 0
res[2]->start = 0
res[2]->end = 0
res[3]->start = 0
res[3]->end = 0
res[4]->start = 0
res[4]->end = 0
res[5]->start = 0
res[5]->end = 0
bus=0x1, slot = 0x0
res[0]->start = 20100000
res[0]->end = 201fffff
res[1]->start = 0
res[1]->end = 0
res[2]->start = 0
res[2]->end = 0
res[3]->start = 0
res[3]->end = 0
res[4]->start = 0
res[4]->end = 0
res[5]->start = 0
res[5]->end = 0
Switching to clocksource Ralink external timer
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 121
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x10000500 (irq = 37) is a 16550A
serial8250: ttyS1 at MMIO 0x10000c00 (irq = 12) is a 16550A
Generic platform RAM MTD, (c) 2004 Simtec Electronics
deice id : ef 40 17 0 0 (40170000)
W25Q64BV(ef 40170000) (8192 Kbytes)
mtd .name = raspi, .size = 0x00800000 (0M) 
.erasesize = 0x00000008 (0K) .numeraseregions = 65536

Creating 6 MTD partitions on "raspi":
0x000000000000-0x000000800000 : "ALL"
NO GPIO Event!
0x000000000000-0x000000020000 : "Bootloader"
0x000000020000-0x000000120000 : "Kernel"
0x000000120000-0x0000007e0000 : "Rootfs"
0x0000007e0000-0x0000007f0000 : "UserConfig"
0x0000007f0000-0x000000800000 : "ART_Data"
SMACCR1 -- : 0x0000ec08
SMACCR0 -- : 0x6b2c02a0
Ralink APSoC Ethernet Driver Initilization. v3.0  256 rx/tx descriptors allocated, mtu = 1500!
SMACCR1 -- : 0x0000ec08
SMACCR0 -- : 0x6b2c02a0
PROC INIT OK!
PPP generic driver version 2.4.2
TCP cubic registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Freeing unused kernel memory: 144k freed
init started:  BusyBox v1.01 (2015.06.29-06:32+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
Raeth v3.0 (Tasklet,SkbRecycle)

phy_tx_ring = 0x03ee2000, tx_ring = 0xa3ee2000
phy_rx_ring0 = 0x03ee3000, rx_ring0 = 0xa3ee3000
SMACCR1 -- : 0x0000ec08
SMACCR0 -- : 0x6b2c02a0
CDMA_CSG_CFG = 81000000
GDMA1_FWD_CFG = 20010000
This Board use 2.6.36.x
xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Restricted Cone
nf_conntrack version 0.5.0 (973 buckets, 5120 max)
Netfilter messages via NETLINK v0.30.
ctnetlink v0.93: registering with nfnetlink.

 (none) mips #2 Mon Jun 29 14:31:06 CST 2015 (none)
(none) login: device eth2.1 entered promiscuous mode
device eth2 entered promiscuous mode
br0: port 1(eth2.1) entering forwarding state
br0: port 1(eth2.1) entering forwarding state
Lan Domain: tplinkrepeater.net
Lan Domain: www.tplinkrepeater.net
rt2860v2_ap: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint
MT7620-->

=== pAd = c09b1000, size = 907424 ===

<-- RTMPAllocTxRxRingMemory, Status=0
<-- RTMPAllocAdapterBlock, Status=0
MT7620-->AP Driver version-2.7.1.6_edcca_monitor_20131227
MT7610-->register rtpci
MT7610-->

=== pAd = c1002000, size = 934536 ===

<-- RTMPAllocTxRxRingMemory, Status=0
<-- RTMPAllocAdapterBlock, Status=0
MT7610-->pAd->CSRBaseAddress =0xc0f00000, csr_addr=0xc0f00000!
MT7610-->device_id =0x7650
MT7610-->==>MT76x0_WLAN_ChipOnOff(): OnOff:1, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0xff000002
MT7610-->MACVersion = 0x76502000
MT7620-->RX DESC a3097000  size = 2048


Pictures

User Images