TP-LINK Archer C5 v4.x

multiple revisions of this device, use caution

abgn+ac (AC1200)
AC1200 Wireless Dual Band Gigabit Router
Homepage	Product page
Wikipedia	TP-Link
WikiDevi.wi-cat.ru	TP-LINK Archer C5 v4.x
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	TP-LINK Archer C5 (SL) v4.x
FCC ID	TE7C5SPV4
Board ID	1706123C5-4.0
Type	wireless router
Series	Archer C5
CPU1	MediaTek MT7620A
CPU1 Type	MIPS 24KEc
CPU1 Speed	580 MHz 32-bit
Flash1 Chip	GigaDevice GD25Q64CSIG
Flash1 Size	8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size	64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip	Zentel A3R12E40DBF-8E
ETH chip1	MediaTek MT7620A
Switch	Realtek RTL8367S
Ethernet Port Count	1-1GbE-WAN 4-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: none specified
Stock bootloader	U-Boot
Stock FW OS	Linux
Expansion IF types	USB 2.0
USB ports	1
USB Hub Compatible	Untested
Power	12 VDC, 1 A
Connector type	barrel
Serial Port (UART)	yes, 4-pin header
Other
Default SSID: TP-Link_XXXX (38 addl. devices) , TP-Link_XXXX_5G (28 addl. devices) Default IP address: 192.168.0.1 the IP 192.168.0.1 is used by 799 additional devices of which 99 are TP-LINK devices Default login user: admin Default login password: admin admin:admin credentials used by 1340 additional devices of which 280 are TP-LINK devices
Manuf/OEM/ODM	Proware
3rd Party Firmware Support	Padavan-ng, OpenWrt • (List | Dev | DLs)
Retail
FCC approval date	26 January 2018
Country of manuf	China
Radio 1
Chip1	MediaTek MT7620A
Wireless interface OUI	none specified
Antenna Connector Type	solderer
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Chip1	MediaTek MT7612E
Wireless interface OUI	none specified
Antenna Connector Type	U.FL
MIMO status	2x2:2
Wireless Standard	IEEE 802.11a/n/ac
802.11ac	up to 867 Mbps
802.11n	up to 300 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz
CPU1 brand Radio1 chip1 brand Radio2 chip1 brand TP-LINK Archer C5 v1.x Qualcomm Atheros Qualcomm Atheros Qualcomm Atheros TP-LINK Archer C5 v2.x Broadcom Broadcom Broadcom TP-LINK Archer C5 v4.x MediaTek MediaTek MediaTek TP-LINK Archer C5v EcoNet MediaTek MediaTek

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented TP-LINK device with specifications, see TP-LINK.

• 867 Mbps - 2SS 5GHz 802.11ac (80MHz chan.),

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AC1200 class

Overview

"1706123C5-4.0 Rev1.0sp1" is silkscreened on the board in the FCC photos.

• Web GUI: http://tplinkwifi.net
• OpenWrt wiki: https://openwrt.org/toh/tp-link/archer_c5_v4
• OpenWrt forum: https://forum.openwrt.org/t/support-for-new-archer-c5-v4/15889

Links of Interest

Reviews

• TP-Link Archer C5 v4 review on Digital Citizen

Flashing

Padavan-ng firmware

firmware: add support for TP-Link Archer C5 V4

 trunk/configs/boards/TPLINK/TL_C5-V4/board.h
	
/* TP-LINK ARCHER C2 V1 */

#define BOARD_PID		"TL_C5-V4"
#define BOARD_NAME		"TL_C5-V4"
#define BOARD_DESC		"TP-Link Archer C5 Wireless Router"
#define BOARD_VENDOR_NAME	"TP-LINK Technologies CO., LTD."
#define BOARD_VENDOR_URL	"http://www.tp-link.com/en"
#define BOARD_MODEL_URL		"http://www.tp-link.com/en/download/Archer-C5_V4.html"
#define BOARD_BOOT_TIME		25
#define BOARD_FLASH_TIME	120
#define BOARD_GPIO_BTN_RESET	13
#define BOARD_GPIO_BTN_WPS	2
#define BOARD_GPIO_LED_WPS	1
#undef  BOARD_GPIO_LED_ALL
#undef BOARD_GPIO_LED_WIFI	72	/* hw led */
#define  BOARD_GPIO_LED_SW2G	14
#define  BOARD_GPIO_LED_SW5G	12
#define  BOARD_GPIO_LED_POWER	42
#define BOARD_GPIO_LED_LAN	8
#define BOARD_GPIO_LED_WAN	10
#undef  BOARD_GPIO_LED_WAN_INVERTED
#undef  BOARD_GPIO_LED_WAN_PHY
#undef  BOARD_GPIO_LED_WAN_PHY_INVERTED
#define BOARD_GPIO_LED_USB	7
#undef  BOARD_GPIO_LED_ROUTER
#undef  BOARD_GPIO_PWR_USB_ON
#undef  BOARD_GPIO_PWR_USB
#undef  BOARD_GPIO_PWR_USB2
#define BOARD_HAS_5G_11AC	1
#define BOARD_NUM_ANT_5G_TX	2
#define BOARD_NUM_ANT_5G_RX	2
#define BOARD_NUM_ANT_2G_TX	2
#define BOARD_NUM_ANT_2G_RX	2
#define BOARD_NUM_ETH_LEDS	2
#define BOARD_HAS_EPHY_L1000	1
#define BOARD_HAS_EPHY_W1000	1

  trunk/configs/boards/TPLINK/TL_C5-V4/board.mk
	
##################################################################
# Board PID # Board Name       # PRODUCT # Note
##################################################################
# ARCHERC2  # TP-LINK ARCHER C2    # MT7620  #
##################################################################
CFLAGS += -DBOARD_ARCHER_C5 -DVENDOR_TPLINK
BOARD_NUM_USB_PORTS=1

### TP-LINK firmware description ###
TPLINK_HWID := 0x04DA857C
TPLINK_HWREV := 0x0C000600
TPLINK_HWREVADD := 0x04000000
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HVERSION=3

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: ramips
OpenWrt Subtarget: mt7620
OpenWrt Package architecture: mipsel_24kc
Support started version: ?
Current supported version: snapshot

Please insert instructions here

JTAG-Serial Info

Serial

Serial Pinouts

3.3V (115200, 8N1) - labeled J2

1 = J2	2	3	4
TX	RX	GND	VCC

Boot log

Boot log

U-Boot 1.1.3 (Jan 23 2018 - 09:14:29) Board: Ralink APSoC DRAM: 64 MB relocate_code Pointer at: 83fb4000 enable ephy clock...done. rf reg 29 = 5 SSC disabled. spi_wait_nsec: 29 spi device id: c8 40 17 c8 40 (4017c840) Warning: un-recognized chip ID, please update bootloader! ============================================ Ralink UBoot Version: 5.0.0.0 -------------------------------------------- ASIC 7620_MP (Port5<->GigaSW) DRAM component: 512 Mbits DDR, width 16 DRAM bus: 16 bit Total memory: 64 MBytes Flash component: SPI Flash Date:Jan 23 2018 Time:09:14:29 ============================================ icache: sets:512, ways:4, linesz:32 ,total:65536 dcache: sets:256, ways:4, linesz:32 ,total:32768 ##### The CPU freq = 580 MHZ #### estimate memory size =64 Mbytes rt_rtl8367_init(1705):Begin Wait for RTL8367C Ready . RTL8367C is ready now! rt_rtl8367_init(1749):Call Func rt_rtl8367_enableRgmii() continue to starting system. [08][08][08] 0 disable switch forward... 3: System Boot system code via Flash.(0xbc020000) do_bootm:argc=2, addr=0xbc020000 ## Booting image at bc020000 ... Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80484090) ... ## Giving linux memsize in MB, 64 Starting kernel ... LINUX started... THIS IS ASIC SDK 5.0.S.0 Linux version 3.10.14 (root@e2a0ff7d55dc) (gcc version 4.6.3 (Buildroot 2012.11.1) ) #1 Tue Jan 23 09:22:26 UTC 2018 The CPU feqenuce set to 580 MHz PCIE: bypass PCIe DLL. PCIE: Elastic buffer control: Addr:0x68 -> 0xB4 disable all power about PCIe CPU0 revision is: 00019650 (MIPS 24KEc) Software DMA cache coherency Determined physical RAM map: memory: 04000000 @ 00000000 (usable) Initrd not found or empty - disabling initrd Zone ranges: Normal [mem 0x00000000-0x03ffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00000000-0x03ffffff] Primary instruction cache 64kB, 4-way, VIPT, linesize 32 bytes. Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: console=ttyS1,115200n8 root=/dev/mtdblock2 rootfstype=squashfs PID hash table entries: 256 (order: -2, 1024 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Writing ErrCtl register=00017389 Readback ErrCtl register=00017389 Memory: 58412k/65536k available (4663k kernel code, 7124k reserved, 1174k data, 304k init, 0k highmem) NR_IRQS:128 console [ttyS1] enabled Calibrating delay loop... 385.02 BogoMIPS (lpj=770048) pid_max: default: 4096 minimum: 301 Mount-cache hash table entries: 512 ftrace: allocating 13655 entries in 27 pages NET: Registered protocol family 16 RALINK_GPIOMODE = 1ab41d RALINK_GPIOMODE = 18b41d PPLL_CFG1=0xe68000 MT7620 PPLL lock PPLL_DRV =0x80080504 start PCIe register access RALINK_RSTCTRL = 2400000 RALINK_CLKCFG1 = 75afffc0 *************** MT7620 PCIe RC mode ************* PCIE0 enabled Port 0 N_FTS = 1b105000 init_rt2880pci done bio: create slab <bio-0> at 0 PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff] pci_bus 0000:00: root bus resource [io 0x10160000-0x1016ffff] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000) pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff] pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit] pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref] pci 0000:00:00.0: PCI bridge to [bus 01] pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff] pci 0000:00:00.0: bridge window [mem 0x20100000-0x201fffff pref] BAR0 at slot 0 = 0 bus=0x0, slot = 0x0 res[0]->start = 0 res[0]->end = 0 res[1]->start = 20200000 res[1]->end = 2020ffff res[2]->start = 0 res[2]->end = 0 res[3]->start = 0 res[3]->end = 0 res[4]->start = 0 res[4]->end = 0 res[5]->start = 0 res[5]->end = 0 bus=0x1, slot = 0x0 res[0]->start = 20000000 res[0]->end = 200fffff res[1]->start = 0 res[1]->end = 0 res[2]->start = 0 res[2]->end = 0 res[3]->start = 0 res[3]->end = 0 res[4]->start = 0 res[4]->end = 0 res[5]->start = 0 res[5]->end = 0 Switching to clocksource MIPS NET: Registered protocol family 2 TCP established hash table entries: 512 (order: 0, 4096 bytes) TCP bind hash table entries: 512 (order: -1, 2048 bytes) TCP: Hash tables configured (established 512 bind 512) TCP: reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 Load Ralink Timer0 Module Load Ralink Timer1 Module MTK/Ralink EHCI/OHCI init. squashfs: version 4.0 (2009/01/31) Phillip Lougher NTFS driver 2.1.30 [Flags: R/W]. fuse init (API version 7.22) msgmni has been set to 114 io scheduler noop registered (default) Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at MMIO 0x10000500 (irq = 37) is a 16550A serial8250: ttyS1 at MMIO 0x10000c00 (irq = 12) is a 16550A Ralink gpio driver initialized brd: module loaded deice id : c8 40 17 c8 40 (4017c840) Warning: un-recognized chip ID, please update SPI driver! GD25Q64B(c8 40170000) (8192 Kbytes) mtd .name = raspi, .size = 0x00800000 (8M) .erasesize = 0x00010000 (64K) .numeraseregions = 0 Creating 7 MTD partitions on "raspi": 0x000000000000-0x000000020000 : "boot" 0x000000020000-0x000000220000 : "kernel" 0x000000220000-0x0000007c0000 : "rootfs" mtd: partition "rootfs" set to be root filesystem 0x0000007c0000-0x0000007d0000 : "config" 0x0000007d0000-0x0000007e0000 : "romfile" 0x0000007e0000-0x0000007f0000 : "ispconfig" 0x0000007f0000-0x000000800000 : "radio" Register flash device:flash0 PPP generic driver version 2.4.2 PPP MPPE Compression module registered NET: Registered protocol family 24 register rt2860 <-- RTMPAllocTxRxRingMemory, Status=0 <-- RTMPAllocAdapterBlock, Status=0 device_id =0x7662 ==>rlt_wlan_chip_onoff(): OnOff:1, Reset= 1, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0x20a RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5 NVM is FLASH mode (pAd->flash_offset = 0x7f8000) get_dev_name_prefix(): dev_idx = 1, dev_name_prefix=rai rdm_major = 253 spiflash_ioctl_read, Read from 0x007df100 length 0x6, ret 0, retlen 0x6 Read MAC from flash( 7df100) 0c-ffffff80-63-ffffffa8-56-52 netif_napi_add() called with weight 128 on device eth0 SMACCR1 -- : 0x00000c80 SMACCR0 -- : 0x63a85652 Ralink APSoC Ethernet Driver Initilization. v3.1 512 rx/tx descriptors allocated, mtu = 1500! NAPI enable, Tx Ring = 512, Rx Ring = 512 spiflash_ioctl_read, Read from 0x007df100 length 0x6, ret 0, retlen 0x6 Read MAC from flash( 7df100) 0c-ffffff80-63-ffffffa8-56-52 SMACCR1 -- : 0x00000c80 SMACCR0 -- : 0x63a85652 PROC INIT OK! Mirror/redirect action on u32 classifier Performance counters on input device check on Actions configured Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (912 buckets, 3648 max) gre: GRE over IPv4 demultiplexor driver ip_tables: (C) 2000-2006 Netfilter Core Team Type=Linux TCP: cubic registered NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Ebtables v2.0 registered 8021q: 802.1Q VLAN Support v1.8 registered taskstats version 1 VFS: Mounted root (squashfs filesystem) readonly on device 31:2. Freeing unused kernel memory: 304K (805b4000 - 80600000) starting pid 713, tty '': '/etc/init.d/rcS' SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-platform: EHCI generic platform driver ehci-platform ehci-platform: EHCI Host Controller ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 ehci-platform ehci-platform: irq 18, io mem 0x101c0000 ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-platform ohci-platform: Generic Platform OHCI Controller ohci-platform ohci-platform: new USB bus registered, assigned bus number 2 ohci-platform ohci-platform: irq 18, io mem 0x101c1000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected usbcore: registered new interface driver usb-storage tp_domain init ok PPTP driver version 0.8.5 l2tp_core: L2TP core driver, V2.0 l2tp_ppp: PPPoL2TP kernel driver, V2.0 Please press Enter to activate this console. [ ipt_init ] cmd: /var/tmp/dconf/rc.router [ dm_readFile ] 2193: can not open xml file /var/tmp/pc/reduced_data_model.xml!, about to open file /etc/reduced_data_model.xml spiflash_ioctl_read, Read from 0x007c0000 length 0x10000, ret 0, retlen 0x10000 spiflash_ioctl_read, Read from 0x007c0000 length 0x94ee, ret 0, retlen 0x94ee ===>Enter routerspiflash_ioctl_read, Read from 0x007df100 length 0x6, ret 0, retlen 0x6 mode spiflash_ioctl_read, Read from 0x007df500 length 0x29, ret 0, retlen 0x29 spiflash_ioctl_read, Read from 0x007df600 length 0x21, ret 0, retlen 0x21 spiflash_ioctl_read, Read from 0x007df700 length 0x10, ret 0, retlen 0x10 spiflash_ioctl_read, Read from 0x007df200 length 0x4, ret 0, retlen 0x4 spiflash_ioctl_read, Read from 0x00020000 length 0x20c, ret 0, retlen 0x20c [ rsl_initDevInfo ] cmd: echo 0 > /proc/tplink/mspiflash_ioctl_read, Read from 0x007df100 length 0x6, ret 0, retlen 0x6 anufacture_flag [ rsl_getManagementServerObj ] 492: cannot set connectionRequestURL yet because no WAN intf is up [ rsl_getManagementServerObj ] 492: cannot set connectionRequestURL yet because no WAN intf is up [ rsl_getManagementServerObj ] 492: cannot set connectionRequestURL yet because no WAN intf is up [ tr143_main ] 162: 909 start select, maxFd: 7, msgFd.fd: 5, compFd: 7 sendto: No such file or directory pid 786 send 2001 error [ oal_startDynDns ] cmd: dyndns /var/tmp/dconf/dyndns.conf [ oal_startNoipDns ] cmd: noipdns /var/tmp/dconf/noipdns.conf [ oal_vlan_fetchState ] 351: Failed to read VLAN file. ioctl: No such device [ oal_br_addBridge ] cmd: brctl addbr br0 [ oal_br_addBridge ] cmd: brctl setfd br0 0 [ oal_br_addBridge ] cmd: brctl stp br0 off [ oal_ipt_addLanRules ] cmd: iptables -t filter -A INPUT -i br+ -j ACCEPT [ oal_intf_setIntf ] cmd: ifconfig br0 192.168.0use br_hw_addr! .1 netmask 255.255.255.0 up [ oal_util_setProcLanAddr ] cmd: echo "br0 16820416," > /proc/net/c 0: 0: C:4C: 5:FFFFFF80 onntract_LocalAdRaeth v3.1 (dr [ oal_intf_eNAPI nableIntf ] cmd:,SkbRecycle ifconfig eth0 u) p phy_tx_ring = 0x02d38000, tx_ring = 0xa2d38000 phy_rx_ring0 = 0x02d3a000, rx_ring0 = 0xa2d3a000 RTL8367C is ready now! SMACCR1 -- : 0x00000c80 SMACCR0 -- : 0x63a85652 ESW: Link Status Changed - Port5 Link UP CDMA_CSG_CFG = 81000000 GDMA1_FWD_CFG = 20710000 [ oal_intf_enableIntf ] cmd: ifconfig eth0.3 up ifconfig: ioctl 0x8913 failed: No such device [ oal_intf_enableIntf ] cmd: ifconfig eth0.4 up ifconfig: ioctl 0x8913 failed: No such device [ oal_intf_enableIntf ] cmd: ifconfig eth0.5 up ifconfig: ioctl 0x8913 failed: No such device [ oal_intf_enableIntf ] cmd: ifconfig eth0.6 up ifconfig: ioctl 0x8913 failed: No such device [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 1 : [3] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 2 : [4] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 3 : [5] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 4 : [6] [ oal_addVlanTagIntf ] cmd: vconfig add eth0 3 [ oal_intf_enableIntf ] cmd: ifconfig eth0.3 up set if eth0.3 to *not wan dev [ oal_intf_enableIntf ] cmd: ifconfig eth0.3 up [ oal_addVlanTagIntf ] cmd: vconfig add eth0 4 [ oal_intf_enableIntf ] cmd: ifconfig eth0.4 up set if eth0.4 to *not wan dev [ oal_intf_disableIntf ] cmd: ifconfig eth0.4 down [ oal_addVlanTagIntf ] cmd: vconfig add eth0 5 [ oal_intf_enableIntf ] cmd: ifconfig eth0.5 up set if eth0.5 to *not wan dev [ oal_intf_disableIntf ] cmd: ifconfig eth0.5 down [ oal_addVlanTagIntf ] cmd: vconfig add eth0 6 [ oal_intf_enableIntf ] cmd: ifconfig eth0.6 up set if eth0.6 to *not wan dev [ oal_intf_disableIntf ] cmd: ifconfig eth0.6 down [ oal_addVlanTagIntf ] cmd: vconfig add eth0 2 [ oal_intf_enableIntf ] cmd: ifconfig eth0.2 up set if eth0.2 to wan dev [ oal_br_delIntfFromBridge ] cmd: brctl delif br0 eth0.3 brctl: bridge br0: Invalid argument [ oal_intf_enableIntf ] cmd: ifconfig edevice eth0.3 entered promiscuous mode th0.3 up [ oal_device eth0 entered promiscuous mode br_addIntfIntoBrbr0: port 1(eth0.3) entered forwarding state idge ] cmd: brctbr0: port 1(eth0.3) entered forwarding state l addif br0 eth0.3 [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 1 : [3] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 2 : [4] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 3 : [5] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 4 : [6] [ oal_intf_enableIntf ] cmd: ifconfig eth0.3 up [ oal_intf_disableIntf ] cmd: ifconfig eth0.4 down [ oal_intf_disableIntf ] cmd: ifconfig eth0.5 down [ oal_intf_disableIntf ] cmd: ifconfig eth0.6 down [ oal_br_delIntfFromBridge ] cmd: brctl delif br0 eth0.4 brctl: bridge br0: Invalid argument [ oal_intf_enableIntf ] cmd: ifconfig eth0.4 up device eth0.4 entered promiscuous mode [ oal_br_addIntfbr0: port 2(eth0.4) entered forwarding state IntoBridge ] cmdbr0: port 2(eth0.4) entered forwarding state : brctl addif br0 eth0.4 [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 1 : [3] [ rsl_getUnubr0: port 2(eth0.4) entered disabled state sedVlan ] 1153: GET UNUSED VLAN TAG 2 : [4] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 3 : [5] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 4 : [6] [ oal_intf_enableIntf ] cmd: ifconfig eth0.3 up [ oal_intf_disableIntf ] cmd: ifconfig eth0.4 down [ oal_intf_disableIntf ] cmd: ifconfig eth0.5 down [ oal_intf_disableIntf ] cmd: ifconfig eth0.6 down [ oal_br_delIntfFromBridge ] cmd: brctl delif br0 eth0.5 brctl: bridge br0: Invalid argument [ oal_intf_enableIntf ] cmd: ifconfig eth0.5 up device eth0.5 entered promiscuous mode [ oal_br_addIntfbr0: port 3(eth0.5) entered forwarding state IntoBridge ] cmdbr0: port 3(eth0.5) entered forwarding state : brctl addif br0 eth0.5 [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 1 : [3] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 2 : [4] [ br0: port 3(eth0.5) entered disabled state rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 3 : [5] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 4 : [6] [ oal_intf_enableIntf ] cmd: ifconfig eth0.3 up [ oal_intf_disableIntf ] cmd: ifconfig eth0.4 down [ oal_intf_disableIntf ] cmd: ifconfig eth0.5 down [ oal_intf_disableIntf ] cmd: ifconfig eth0.6 down [ oal_br_delIntfFromBridge ] cmd: brctl delif br0 eth0.6 brctl: bridge br0: Invalid argument [ oal_intf_enableIntf ] cmd: ifconfig eth0.6 up device eth0.6 entered promiscuous mode [ oal_br_addIntfbr0: port 4(eth0.6) entered forwarding state IntoBridge ] cmdbr0: port 4(eth0.6) entered forwarding state : brctl addif br0 eth0.6 [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 1 : [3] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 2 : [4] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 3br0: port 4(eth0.6) entered disabled state : [5] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 4 : [6] [ oal_intf_enableIntf ] cmd: ifconfig eth0.3 up [ oal_intf_disableIntf ] cmd: ifconfig eth0.4 down [ oal_intf_disableIntf ] cmd: ifconfig eth0.5 down [ oal_intf_disableIntf ] cmd: ifconfig eth0.6 down [ oal_eth_setIGMPSnoopParam ] cmd: sh /etc/igmp/igmp_snoop.sh 1 [ oal_eth_setIGMPSnoopParam ] cmd: echo 1 > /proc/tplink/eth_igmp_snooping [ oal_wlan_ra_setCountryRegion ] cmd: cp /etc/SingleSKU.dat /var/Wireless/RT2860AP/SingleSKU.dat [ oal_wlan_ra_setCountryRegion ] cmd: iwpriv ra0 set CountryRegion=1 ra0 no private ioctls. [ oal_wlan_ra_loadDriver ] cmd: insmod /lib/modules/kmdir/kernel/drivers/net/wireless/rt2860v2_ap/rt2860v2_ap.ko [ oal_wlan_ra_WriteWlanCfgFile ] cmd: ifconfig apcli0 down ifconfig: ioctl 0x8913 failed: No such device [ oal_wlan_ra_WriteWlanCfgFile ] cmd: ifconfig ra1 down ifconfig: ioctl 0x8913 failed: No such device [ oal_wlan_ra_WriteWlanCfgFile ] cmd: ifconfig ra2 down ifconfig: ioctl 0x8913 failed: No such device [ oal_wlan_ra_WriteWlanCfgFile ] cmd: ifconfig ra3 down ifconfig: ioctl 0x8913 failed: No such device [ oal_wlan_ra_WriteWlanCfgFile ] cmd: ifconfig ra4 down ifconfig: ioctl 0x8913 failed: No such device [ oal_wlan_ra_WriteWlanCfgFile ] cmd: ifconfig ra0 down [ oal_wlan_ra_openVap ] cmd: ifconfig ra0 up start ch = 1, ch->num = 2 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 start ch = 3, ch->num = 9 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 start ch = 12, ch->num = 2 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 start ch = 14, ch->num = 1 28 28 28 28 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 exec! spiflash_ioctl_read, Read from 0x007f0000 length 0x200, ret 0, retlen 0x200 eeFlashId = 0x7620! open DNS error: No such file or directory [ oal_sys_getOldTZInfo ] 462: Open TZ file error! [ oal_sys_unsetTZ ] cmd: echo "" > /etc/TZ [ oal_sys_unsetTZ ] cmd: echo "" > /etc/TZ 0x1300 = 00064320 [ oal_wlan_ra_openVap ] cmd: killall -q wscd [ oal_wlan_ra_openVap ] cmd: wscd -i ra0 -m 1 -w /var/tmp/wsc_upnp/ & [ oal_wlan_controlWlanLed ] cmd: echo "1" > /proc/tplink/led_wlan_24G [ oal_wlan_ra_initWlan ] cmd: ifconfig ra0 up [ oal_wlan_controlWlanLed ] cmd: echo "1" > /proc/tplink/led_wladevice ra0 entered promiscuous mode n_24G [ oal_br_br0: port 5(ra0) entered forwarding state addIntfIntoBridgbr0: port 5(ra0) entered forwarding state e ] cmd: brctl addif br0 ra0 [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 1 : [3] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 2 : [4] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 3 : [5] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 4 : [6] [ oal_intf_enableIntf ] cmd: ifconfig eth0.3 up [ oal_intf_disableIntf ] cmd: ifconfig eth0.4 down [ oal_intf_disableIntf ] cmd: ifconfig eth0.5 down [ oal_intf_disableIntf ] cmd: ifconfig eth0.6 down [ oal_br_addIntfIntoBridge ] cmd: brctl addif brdevice apcli0 entered promiscuous mode 0 apcli0 wscd: SSDP UDP PORT = 1900 [ oal_br_addIntfIntoBridge ] cmd: brctl addif brdevice ra2 entered promiscuous mode 0 ra2 [ oal_br_addIntfIntoBridge ] cmd: brctl addif brdevice ra3 entered promiscuous mode 0 ra3 [ oal_br_addIntfIntoBridge ] cmd: brctl addif brdevice ra4 entered promiscuous mode 0 ra4 [ wlan_handleL2Desc ] 2401: br0 [ oal_br_addIndevice ra1 entered promiscuous mode tfIntoBridge ] cmd: brctl addif br0 ra1 [ oal_wlan_ra_initEnd ] cmd: wlNetlinkTool & spiflash_ioctl_read, Read from 0x007f0000 length 0x2, ret 0, retlen 0x2 [ oal_wlan_ra_initEnd ] cmd: killall -q wscd WLAN-Start wlNetlinkTool [ oal_wlan_ra_initEnd ] cmd: wscd -i ra0 -m 1 -w /var/tmp/wsc_upnp/ & Waiting for Wireless Events from interfaces... swWlanChkAhbErr: netlink to do wscd: SSDP UDP PORT = 1900 [ oal_wlan_ra_setCountryRegion ] cmd: cp /etc/SingleSKU_5G.dat /var/Wireless/RT2860AP/SingleSKU_5G.dat [ oal_wlan_ra_setCountryRegion ] cmd: iwpriv rai0 set CountryRegionABand=1 Interface doesn't accept private ioctl... set (8BE2): Network is down [ oal_wlan_ra_WriteWlanCfgFile ] cmd: ifconfig apclii0 down ifconfig: ioctl 0x8913 failed: No such device [ oal_wlan_ra_WriteWlanCfgFile ] cmd: ifconfig rai1 down ifconfig: ioctl 0x8913 failed: No such device [ oal_wlan_ra_WriteWlanCfgFile ] cmd: ifconfig rai2 down ifconfig: ioctl 0x8913 failed: No such device [ oal_wlan_ra_WriteWlanCfgFile ] cmd: ifconfig rai3 down ifconfig: ioctl 0x8913 failed: No such device [ oal_wlan_ra_WriteWlanCfgFile ] cmd: ifconfig rai4 down ifconfig: ioctl 0x8913 failed: No such device [ oal_wlan_ra_WriteWlanCfgFile ] cmd: ifconfig rai0 down [ oal_wlan_ra_openVap ] cmd: ifconfig rai0 up build time = 20141115060606a rom patch for E3 IC platform = ALPS hw/sw version = Š[10]Š[10] patch version = [00][00][00][10] FW Version:0.0.00 Build:1 Build Time:201507311614____ fw for E3 IC spiflash_ioctl_read, Read from 0x007f8000 length 0x200, ret 0, retlen 0x200 ==============eeFlashId: 30306 ==================== RX[0] DESC a3438000 size = 4096 RX[1] DESC a3439000 size = 4096 E2pAccessMode=2 cfg_mode=14 cfg_mode=14 APSDCapable[0]=0 APSDCapable[1]=0 APSDCapable[2]=0 APSDCapable[3]=0 APSDCapable[4]=0 APSDCapable[5]=0 APSDCapable[6]=0 APSDCapable[7]=0 APSDCapable[8]=0 APSDCapable[9]=0 APSDCapable[10]=0 APSDCapable[11]=0 APSDCapable[12]=0 APSDCapable[13]=0 APSDCapable[14]=0 APSDCapable[15]=0 default ApCliAPSDCapable[0]=0 pAd->ed_threshold = 90 pAd->ed_chk = 0 pAd->ed_false_cca_threshold = 250 Key1Str is Invalid key length(0) or Type(0) Key1Str is Invalid key length(0) or Type(0) Key1Str is Invalid key length(0) or Type(0) Key1Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) APCli_WPAPSK_KEY, key string required 8 ~ 64 characters!!! I/F(apcli0) Key1Str is Invalid key length! I/F(apcli0) Key2Str is Invalid key length! I/F(apcli0) Key3Str is Invalid key length! I/F(apcli0) Key4Str is Invalid key length! 1. Phy Mode = 49 spiflash_ioctl_read, Read from 0x007f8000 length 0x200, ret 0, retlen 0x200 ==============eeFlashId: 30306 ==================== get_chl_grp:illegal channel (167) get_chl_grp:illegal channel (167) get_chl_grp:illegal channel (169) get_chl_grp:illegal channel (169) get_chl_grp:illegal channel (171) get_chl_grp:illegal channel (171) Country Region from e2p = ffff mt76x2_read_temp_info_from_eeprom:: is_temp_tx_alc=1, temp_tx_alc_enable=1 mt76x2_read_tx_alc_info_from_eeprom:: is_ePA_mode=1, ePA_type=1 mt76x2_read_tx_alc_info_from_eeprom:: [5G band] high_temp_slope=15, low_temp_slope=9 mt76x2_read_tx_alc_info_from_eeprom:: [2G band] high_temp_slope=0, low_temp_slope=0 mt76x2_read_tx_alc_info_from_eeprom:: [5G band] tc_lower_bound=-7, tc_upper_bound=4 mt76x2_read_tx_alc_info_from_eeprom:: [2G band] tc_lower_bound=0, tc_upper_bound=0 mt76x2_get_external_lna_gain::LNA type=0x1, BLNAGain=0xffffff8c, ALNAGain0=0xffffff8c, ALNAGain1=0xffffff8c, ALNAGain2=0xffffff8c 2. Phy Mode = 49 3. Phy Mode = 49 andes_pci_fw_init 0x1300 = 00073200 AntCfgInit: primary/secondary ant 0/1 andes_load_cr:cr_type(2) ChipStructAssign(): MT76x2 hook ! MCS Set = ff ff 00 00 01 mt76x2_single_sku::sku_base_pwr = 0x20, DefaultTargetPwr = 0x22, ch_pwr_adj = 0xfffffffe(-2), 0x13B4: 0x1b0f043e mt76x2_single_sku::sku_base_pwr = 0x20, DefaultTargetPwr = 0x22, ch_pwr_adj = 0xfffffffe(-2), 0x13B4: 0x1b0f043e mt76x2_single_sku::sku_base_pwr = 0x20, DefaultTargetPwr = 0x22, ch_pwr_adj = 0xfffffffe(-2), 0x13B4: 0x1b0f043e mt76x2_single_sku::sku_base_pwr = 0x20, DefaultTargetPwr = 0x22, ch_pwr_adj = 0xfffffffe(-2), 0x13B4: 0x1b0f043e mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400 mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400 mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400 mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400 mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400 mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400 mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400 mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400 mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400 mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400 mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400 mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400 mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400 mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400 mt76x2_single_sku::sku_base_pwr = 0x22, DefaultTargetPwr = 0x22, ch_pwr_adj = 0x0(0), 0x13B4: 0x1b0f0400 mt76x2_single_sku::sku_base_pwr = 0x20, DefaultTargetPwr = 0x22, ch_pwr_adj = 0xfffffffe(-2), 0x13B4: 0x1b0f043e APStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2) The 8-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 8 ap_ftkd> Initialize FT KDP Module... @@@ ed_monitor_init : ===> @@@ ed_monitor_init : <=== Main bssid = 0c:80:63:a8:56:54 mt76x2_reinit_agc_gain:original agc_vga0 = 0x48, agc_vga1 = 0x48 mt76x2_reinit_agc_gain:updated agc_vga0 = 0x48, agc_vga1 = 0x48 mt76x2_reinit_hi_lna_gain:original hi_lna0 = 0x33, hi_lna1 = 0x33 mt76x2_reinit_hi_lna_gain:updated hi_lna0 = 0x33, hi_lna1 = 0x33 <==== rt28xx_init, Status=0 get_dev_name_prefix(): dev_idx = 1, dev_name_prefix=rai get_dev_name_prefix(): dev_idx = 1, dev_name_prefix=rai get_dev_name_prefix(): dev_idx = 1, dev_name_prefix=rai get_dev_name_prefix(): dev_idx = 1, dev_name_prefix=rai get_dev_name_prefix(): dev_idx = 1, dev_name_prefix=apclii RTMPDrvOpen(1):Check if PDMA is idle! RTMPDrvOpen(2):Check if PDMA is idle! @@@ ed_monitor_init : ===> @@@ ed_monitor_init : <=== [ oal_wlan_ra_openVap ] cmd: killall -q wscd_5G [ oal_wlan_ra_openVap ] cmd: wscd_5G -i rai0 -m 1 -w /var/tmp/wsc_upnp_5G/ & [ oal_wlan_controlWlanLed ] cmd: echo "1" > /proc/tplink/led_wlan_5G [ oal_wlan_ra_WriteWlanCfgFile ] cmd: iwpriv rai0 set ed_chk=1 wscd: SSDP UDP PORT = 1900 @@@ ed_monitor_init : ===> @@@ ed_monitor_init : <=== [ oal_wlan_ra_initWlan ] cmd: ifconfig rai0 up [ oal_wlan_controlWlanLed ] cmd: echo "1" > /proc/tplink/led_wladevice rai0 entered promiscuous mode n_5G [ oal_br_abr0: port 11(rai0) entered forwarding state ddIntfIntoBridgebr0: port 11(rai0) entered forwarding state ] cmd: brctl addif br0 rai0 [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 1 : [3] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 2 : [4] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 3 : [5] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 4 : [6] [ oal_intf_enableIntf ] cmd: ifconfig eth0.3 up [ oal_intf_disableIntf ] cmd: ifconfig eth0.4 down [ oal_intf_disableIntf ] cmd: ifconfig eth0.5 down [ oal_intf_disableIntf ] cmd: ifconfig eth0.6 down [ oal_br_addIntfIntoBridge ] cmd: brctl addif brdevice apclii0 entered promiscuous mode 0 apclii0 [ oal_br_addIntfIntoBridge ] cmd: brctl addif brdevice rai2 entered promiscuous mode 0 rai2 [ oal_br_addIntfIntoBridge ] cmd: brctl addif brdevice rai3 entered promiscuous mode 0 rai3 [ oal_br_addIntfIntoBridge ] cmd: brctl addif brdevice rai4 entered promiscuous mode 0 rai4 [ wlan_handleL2Desc ] 2401: br0 [ oal_br_addIndevice rai1 entered promiscuous mode tfIntoBridge ] cmd: brctl addif br0 rai1 wlNetlinkTool isspiflash_ioctl_read, Read from 0x007f8000 length 0x2, ret 0, retlen 0x2 already there. [ oal_wlan_ra_initEnd ] cmd: killall -q wscd_5G [ oal_wlan_ra_initEnd ] cmd: wscd_5G -i rai0 -m 1 -w /var/tmp/wsc_upnp_5G/ & wscd: SSDP UDP PORT = 1900 sendto: No such file or directory pid 786 send 2030 error [ oal_startUPnP ] cmd: upnpd -L br0 -W eth0.2 -en 1 -nat 0 -port 80 -url "http://www.tp-link.com" -ma "TP-Link" -mn "Archer_C5" -mv "4.0" -desc "AC1200 Wireless Dual Band Gigabit Router " & sendto: No such file or directory pid 786 send 2004 error [ oal_ovpn_createDir ] cmd: mkdir /var/openvpn [ oal_ovpn_createDir ] cmd: chmod 777 /var/openvpn [ oal_ovpn_setupTunMod ] cmd: insmod /lib/modules/kmdir/kernel/drivers/net/tun.ko tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ oal_pvpn_setupNeededMod ] cmd: insmod /lib/modules/kmdir/kernel/drivers/net/ppp_mppe.ko insmod: can't insert '/lib/modules/kmdir/kernel/drivers/net/ppp_mppe.ko': No such file or directory [ oal_startDhcps ] cmd: dhcpd /var/tmp/dconf/udhcpd.conf [ oal_lan6_startDhcp6s ] cmd: dhcp6s -c /var/tmp/dconf/dhcp6s_br0.conf -P /var/run/dhcp6s_br0.pid br0 & [ oal_lan6_startRadvd ] cmd: radvd -C /var/tmp/dconf/radvd_br0.conf -p /var/run/radvd_br0.pid & [ oal_snmp_updateCfg ] cmd: iptables -t filter -D ACL -p udp --dport 161 -j ACCEPT iptables: Bad rule (does a matching rule exist in that chain?). [ oal_startSnmp ] cmd: snmpd -f /var/tmp/dconf/snmpd.conf iptables: Bad rule (does a matching rule exist in that chain?). radvd starting [ oal_br_delIntfFromBridge ] cmd: brctl delif br0 eth0.2 brctl: bridge br0: Invalid argument [ oal_br_delIntfFromBridge ] cmd: brctl delif br0 eth0.2 brctl: bridge br0: Invalid argument [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 1 : [3] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 2 : [4] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 3 : [5] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 4 : [6] [ oal_intf_enableIntf ] cmd: ifconfig eth0.3 up sh: can't create /proc/sys/kernel/core_pattern: nonexistent directory [ oal_intf_disableIntf ] cmd: ifconfig eth0.4 down [ oal_intf_disableIntf ] cmd: ifconfig eth0.5 down [ oal_intf_disableIntf ] cmd: ifconfig eth0.6 down [ util_enFuncQueue ] 099: Function queue not support RDP_OPT_ADD_OBJ operation [ util_enFuncQueue ] 099: Function queue not support RDP_OPT_ADD_OBJ operation set eth status, stack = 2 [1 1 0 0 0 0] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 1 : [3] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 2 : [4] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 3 : [5] [ rsl_getUnusedVlan ] 1153: GET UNUSED VLAN TAG 4 : [6] [ oal_intf_enableIntf ] cmd: ifconfig eth0.3 up [ oal_intf_disableIntf ] cmd: ifconfig eth0.4 down [ oal_intf_disableIntf ] cmd: ifconfig eth0.5 down [ oal_intf_disableIntf ] cmd: ifconfig eth0.6 down [ oal_intf_setIfMac ] cmd: ifconfig eth0.2 down [ oal_intf_setIfMac ] cmd: ifconfig eth0.2 hw ether 0C:80:63:A8:56:53 up [ oal_intf_enableIntf ] cmd: ifconfig eth0.2 up [ oal_ipt_setDDoSRules ] cmd: iptables -F FIREWALL_DDOS [ ddos_clearAll ] cmd: rm -f /var/tmp/dosHost [ setupModules ] cmd: insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_ftp.ko [ setupModules ] cmd: insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_ftp.ko [ oal_openAlg ] cmd: iptables -D FORWARD_VPN_PASSTHROUGH -p udp --dport 500 -j DROP iptables: Bad rule (does a matching rule exist in that chain?). [ setupModules ] cmd: insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_proto_gre.ko insmod: can't insert '/lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_proto_gre.ko': File exists [ setupModules ] cmd: insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_proto_gre.ko [ setupModules ] cmd: insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_pptp.ko insmod: can't insert '/lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_pptp.ko': File exists [ setupModules ] cmd: insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_pptp.ko [ oal_openAlg ] cmd: iptables -D FORWARD_VPN_PASSTHROUGH -p tcp --dport 1723 -j DROP iptables: Bad rule (does a matching rule exist in that chain?). [ oal_openAlg ] cmd: iptables -D FORWARD_VPN_PASSTHROUGH -p udp --dport 1701 -j DROP iptables: Bad rule (does a matching rule exist in that chain?). [ setupModules ] cmd: insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_tftp.ko [ setupModules ] cmd: insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_tftp.ko [ setupModules ] cmd: insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_h323.ko [ setupModules ] cmd: insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_h323.ko [ setupModules ] cmd: insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_sip.ko [ setupModules ] cmd: insmod /lib/modules/kmdirRalink HW NAT Module Enabled /kernel/net/ipv4/netfilter/nf_nat_sip.ko [ oal_wan_HWNat_enable ] cmd: insmod /lib/modules/kmdir/kernel/net/nat/hw_nat/hw_nat.ko [ oal_initIp6FirewallObj ] cmd: ip6tables -F [ oal_initIp6FirewallObj ] cmd: ip6tables -X [ oal_initIp6FirewallObj ] cmd: ip6tables -P INPUT DROP [ oal_initIp6FirewallObj ] cmd: ip6tables -P FORWARD DROP [ oal_initIp6FirewallObj ] cmd: ip6tables -P OUTPUT ACCEPT [ oal_initIp6FirewallObj ] cmd: ip6tables -N ACLV6 [ oal_initIp6FirewallObj ] cmd: ip6tables -N FIREWALL [ oal_initIp6FirewallObj ] cmd: ip6tables -N FWRULE [ oal_initIp6FirewallObj ] cmd: ip6tables -N INPUT_FIREWALL [ oal_initIp6FirewallObj ] cmd: ip6tables -N INPUT_FWRULE [ oal_initIp6FirewallObj ] cmd: ip6tables -N PARENTCTL [ oal_initIp6FirewallObj ] cmd: ip6tables -N PCRULE [ oal_initIp6FirewallObj ] cmd: ip6tables -N PCDROP [ oal_initIp6FirewallObj ] cmd: ip6tables -N INPUT_PARENTCTL [ oal_initIp6FirewallObj ] cmd: ip6tables -A INPUT -i lo -p ALL -j ACCEPT -m comment --comment "loop back" [ oal_initIp6FirewallObj ] cmd: ip6tables -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT [ oal_initIp6FirewallObj ] cmd: ip6tables -A INPUT -j ACLV6 [ oal_initIp6FirewallObj ] cmd: ip6tables -A INPUT -p icmpv6 ! --icmpv6-type echo-request -j ACCEPT [ oal_initIp6FirewallObj ] cmd: ip6tables -A INPUT -p udp ! -i br+ --sport 547 --dport 546 -j ACCEPT [ oal_initIp6FirewallObj ] cmd: ip6tables -A INPUT -p udp -i br+ --sport 546 --dport 547 -j ACCEPT [ oal_initIp6FirewallObj ] cmd: ip6tables -A INPUT -p udp --sport 521 --dport 521 -j ACCEPT [ oal_initIp6FirewallObj ] cmd: ip6tables -A INPUT -j INPUT_PARENTCTL [ oal_initIp6FirewallObj ] cmd: ip6tables -A INPUT -j INPUT_FIREWALL [ oal_initIp6FirewallObj ] cmd: ip6tables -A FORWARD -o br+ -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT [ oal_initIp6FirewallObj ] cmd: ip6tables -A FORWARD -j PARENTCTL [ oal_initIp6FirewallObj ] cmd: ip6tables -A FORWARD -j FIREWALL [ oal_initIp6FirewallObj ] cmd: ip6tables -A FORWARD -i br+ -j ACCEPT [ oal_ipt6_setLanHttpPort ] cmd: ip6tables -A INPUT -i br+ -p tcp --dport 80 -j ACCEPT [ oal_fw6_setFwEnabeld ] cmd: ip6tables -D FIREWALL -j ACCEPT ip6tables: Bad rule (does a matching rule exist in that chain?). [ oal_fw6_setFwEnabeld ] cmd: ip6tables -F FIREWALL [ oal_fw6_setSpiFirewall ] cmd: ip6tables -t filter -D FORWARD ! -i br+ -m conntrack --ctstate NEW -j ACCEPT ip6tables: Bad rule (does a matching rule exist in that chain?). [ oal_initFirewallObj ] cmd: ebtables -N FIREWALL [ oal_fw_setSpiFirewall ] cmd: iptables -t filter -D FORWARD ! -i br+ -m conntrack --ctstate NEW -j ACCEPT iptables: Bad rule (does a matching rule exist in that chain?). [ rsl_setStorageServiceObj ] 1394: mountFlag is 3,We start usb server [ oal_killDlnaMediaSeverProcess ] cmd: killall ushare killall: ushare: no process killed uShare (version 1.1a), a lightweight UPnP A/V and DLNA Media Server. Benjamin Zores (C) 2005-2007, for GeeXboX Team. See http://ushare.geexbox.org/ for updates. [ oal_ipt_setWanPort ] cmd: iptables -t filter -D INPUT -p tcp --dport 21 -j ACCEPT iptables: Bad rule (does a matching rule exist in that chain?). [ oal_ipt_setWanPort ] cmd: iptables -t nat -D PREROUTING -p tcp --dport 21 -j ACCEPT iptables: Bad rule (does a matching rule exist in that chain?). [ oal_ipt_setWanPort ] cmd: ip6tables -t filter -D ACLV6 -p tcp --dport 21 -j ACCEPT ip6tables: Bad rule (does a matching rule exist in that chain?). [ oal_ipt_setAclRules ] cmd: iptables -t filter -A ACL -i br+ -p icmp -j ACCEPT [ oal_ipt_setAclRules ] cmd: ip6tables -t filter -A ACLV6 -i br+ -p icmpv6 --icmpv6-type echo-request -j ACCEPT [ oal_sys_enablePowerLed ] cmd: echo 1 > /proc/tplink/led_sys [ cos_init ] cmd: echo 3 > /proc/sys/vm/drop_caches Found 0 files and subdirectories.

Pictures

Retail Images

• 
• 
• 

User Images

• 

  Main board top

• 

  Main board bottom