Smartenit Harmony P2
From TechInfoDepot
Jump to navigationJump to searchZigBee (ZigBee) | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Home Automation Hub | |||||||||||||
Homepage | |||||||||||||
3rd Party Firmware | |||||||||||||
dd-wrt |
Status Unknown | ||||||||||||
OpenWrt | |||||||||||||
Tomato any flavor |
Incompatible | ||||||||||||
Gargoyle |
Status Unknown | ||||||||||||
Platform | |||||||||||||
Brand • Model • Rev |
Smartenit Harmony P2 | ||||||||||||
Model Part Number |
6007C | ||||||||||||
FCC ID | |||||||||||||
IC ID | |||||||||||||
Type |
home automation controller, IoT hub, IoT | ||||||||||||
CPU1 |
Marvell 88F6192 | ||||||||||||
CPU1 Type |
ARMv5 Feroceon core | ||||||||||||
CPU1 Speed |
1.0 GHz | ||||||||||||
Flash1 Chip |
SK hynix H27U1G8F2BTR | ||||||||||||
Flash1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> | ||||||||||||
RAM1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> | ||||||||||||
RAM1 Chip |
SK hynix H5PS1G63EFR | ||||||||||||
ETH chip1 |
Marvell 88F6192 | ||||||||||||
ETH chip2 |
Marvell 88E1116R | ||||||||||||
Ethernet Port Count |
1-1GbE-LAN | ||||||||||||
Wired Standard |
IEEE 802.3i/3u/3ab | ||||||||||||
802dot11 OUI: none specified | |||||||||||||
Stock bootloader |
U-Boot 1.1.4 Cloud Engines (3.2.27) | ||||||||||||
Stock FW OS |
Linux 3.3.8 | ||||||||||||
Expansion IF types |
USB 2.0, SDHC | ||||||||||||
USB ports |
1 | ||||||||||||
SD/MMC Slots |
1 | ||||||||||||
USB Hub Compatible |
Untested | ||||||||||||
Power |
12 VDC, 1 A | ||||||||||||
Connector type |
barrel | ||||||||||||
Serial Port (UART) |
yes, 4-pad header, 3.3V TTL, (115200 8N1), J11 | ||||||||||||
JTAG Port |
yes, 6-pin header, J17 | ||||||||||||
Flags: MicroSD Card slot, ZigBee | |||||||||||||
Additional chips | |||||||||||||
Other | |||||||||||||
| |||||||||||||
3rd Party Firmware Support | |||||||||||||
Retail | |||||||||||||
FCC approval date | 14 March 2012 | ||||||||||||
(Est.) initial retail price (in USD): | $59.99 | ||||||||||||
ASINs |
B00JPS4H1Q B07B9PSL1M | ||||||||||||
Country of manuf | China | ||||||||||||
Radio 1 | |||||||||||||
Radio1 module | |||||||||||||
Radio1 module IF |
Serial (module) | ||||||||||||
Chip1 |
NXP JN5148 | ||||||||||||
Wireless interface OUI |
none specified | ||||||||||||
Antenna Connector Type |
RP-SMA | ||||||||||||
Wireless Standard |
ZigBee | ||||||||||||
|
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented NXP (Freescale) SoC's with specifications, see NXP.
Overview
- This is a relabeled Cloud Engines Pogoplug v4 A1 (Mobile) with a Jennic ZigBee card attached to the serial pins.
Hardware specification
- CPU: Marvell Kirkwood 88F6192 @1.0GHz
- Storage: 128MB (NAND) flash,
- TF card (max.32GB)/MMC card slot
- Memory: 128MB (DDR2) SDRAM
- Network: 1x Gigabit Ethernet port
- USB: 1x USB 2.0 port
- Wireless: Zigbee (802.15.4)
- Power Source: 12V/1A via barrel
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Support started version: ?
Current supported version: ?
Current supported version: ?
Please insert instructions here
Pictures
See also
- Smartenit Harmony G1 (6007D)
- Smartenit Harmony G2 (6007E)
- Smartenit Harmony P2 (6007C)
Categories:
- Smartenit
- Embedded system/home automation controller
- Embedded system/IoT hub
- Embedded system/IoT
- Embedded System Marvell
- Embedded System 88F6192
- Marvell
- Embedded System ARMv5
- Embedded System Feroceon core
- Embedded System 88E1116R
- OpenWrt Supported
- Embedded System NXP
- Embedded System JN5148
- NXP
- Embedded System ZigBee
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Embedded System
- English Documentation