SmartRG SDG-8612
From TechInfoDepot
Jump to navigationJump to searchabgn+ac+ax (AX6000) | |||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wi-Fi 6 dual-band gateway | |||||||||||||||||||||
3rd Party Firmware | |||||||||||||||||||||
dd-wrt |
Status Unknown | ||||||||||||||||||||
OpenWrt | |||||||||||||||||||||
Tomato any flavor |
Incompatible | ||||||||||||||||||||
Gargoyle |
Status Unknown | ||||||||||||||||||||
Platform | |||||||||||||||||||||
Brand • Model • Rev |
SmartRG SDG-8612 | ||||||||||||||||||||
FCC ID |
none specified | ||||||||||||||||||||
Type |
wireless router | ||||||||||||||||||||
CPU1 |
MediaTek MT7986A | ||||||||||||||||||||
CPU1 Speed |
2.0 GHz ( 4 cores ) | ||||||||||||||||||||
Flash1 Chip |
Brand? Model? | ||||||||||||||||||||
Flash1 Size |
8 GiB 8,192 MiB <br />8,589,934,592 B <br />67,108,864 Kib <br />8,388,608 KiB <br />65,536 Mib <br /> (eMMC) | ||||||||||||||||||||
RAM1 Size |
2 GiB 2,048 MiB <br />2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br /> (DDR4) | ||||||||||||||||||||
RAM1 Chip |
Brand? Model? | ||||||||||||||||||||
ETH chip1 |
MediaTek MT7986A | ||||||||||||||||||||
ETH chip2 |
MaxLinear Model? | ||||||||||||||||||||
ETH chip3 |
MaxLinear Model? | ||||||||||||||||||||
Switch |
MediaTek MT7531 | ||||||||||||||||||||
Ethernet Port Count |
2-2.5GbE-WAN 3-1GbE-LAN | ||||||||||||||||||||
Wired Standard |
IEEE 802.3i/3u/3ab/3bz | ||||||||||||||||||||
802dot11 OUI: none specified | |||||||||||||||||||||
Stock bootloader |
U-Boot | ||||||||||||||||||||
Expansion IF types |
USB 3.0 | ||||||||||||||||||||
USB ports |
1 | ||||||||||||||||||||
USB Hub Compatible |
Untested | ||||||||||||||||||||
Power |
? VDC, ? A | ||||||||||||||||||||
Connector type |
USB Type-C | ||||||||||||||||||||
Serial Port (UART) |
yes, 3.3, (115200 8N1) | ||||||||||||||||||||
Flags: Wi-Fi 6, Bluetooth 5.0 | |||||||||||||||||||||
Other | |||||||||||||||||||||
| |||||||||||||||||||||
3rd Party Firmware Support | |||||||||||||||||||||
Radio 1 | |||||||||||||||||||||
Chip1 |
MediaTek MT7986A | ||||||||||||||||||||
Wireless interface OUI |
none specified | ||||||||||||||||||||
Antenna Connector Type |
none specified | ||||||||||||||||||||
MIMO status |
4x4:4 | ||||||||||||||||||||
Wireless Standard |
IEEE 802.11b/g/n/ax | ||||||||||||||||||||
AX-QAM |
up to 1148 Mbps | ||||||||||||||||||||
802.11ax |
up to 574 Mbps | ||||||||||||||||||||
802.11n |
up to 600 Mbps | ||||||||||||||||||||
802.11g |
up to 54 Mbps | ||||||||||||||||||||
802.11b |
up to 11 Mbps | ||||||||||||||||||||
WiFi Operating Frequency |
2.4 GHz | ||||||||||||||||||||
Radio 2 | |||||||||||||||||||||
Chip1 |
MediaTek MT7986A | ||||||||||||||||||||
Wireless interface OUI |
none specified | ||||||||||||||||||||
Antenna Connector Type |
none specified | ||||||||||||||||||||
MIMO status |
4x4:4 | ||||||||||||||||||||
Wireless Standard |
IEEE 802.11a/n/ac/ax | ||||||||||||||||||||
AX-QAM |
up to 4804 Mbps | ||||||||||||||||||||
802.11ax |
up to 2402 Mbps | ||||||||||||||||||||
802.11ac |
up to 1733 Mbps | ||||||||||||||||||||
802.11n |
up to 600 Mbps | ||||||||||||||||||||
802.11a |
up to 54 Mbps | ||||||||||||||||||||
WiFi Operating Frequency |
5 GHz | ||||||||||||||||||||
|
For a list of all currently documented MaxLinear chipsets with specifications, see MaxLinear.
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented SmartRG device with specifications, see SmartRG.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: mediatek
OpenWrt Subtarget: filogic
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: ?
Current supported version: snapshot
OpenWrt Target: mediatek
OpenWrt Subtarget: filogic
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: ?
Current supported version: snapshot
Please insert instructions here
Categories:
- SmartRG
- Embedded system/wireless router
- Embedded System MediaTek
- Embedded System MT7986A
- MediaTek
- Embedded System
- Embedded System MaxLinear
- MaxLinear
- Embedded System MT7531
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n/ax
- Embedded System IEEE 802.11a/n/ac/ax
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation