SerComm NA502
From TechInfoDepot
(Redirected from Sercomm NA502)
Jump to navigationJump to searchabgn+ac (AC1200) | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
IoT Gateway | |||||||||||||
3rd Party Firmware | |||||||||||||
dd-wrt |
Status Unknown | ||||||||||||
OpenWrt | |||||||||||||
Tomato any flavor |
Incompatible | ||||||||||||
Gargoyle |
Status Unknown | ||||||||||||
Platform | |||||||||||||
Brand • Model • Rev |
SerComm NA502 | ||||||||||||
FCC ID | |||||||||||||
Type |
IoT Gateway | ||||||||||||
CPU1 | |||||||||||||
CPU1 Type |
MIPS 1004Kc | ||||||||||||
CPU1 Speed |
880 MHz 16-bit | ||||||||||||
Flash1 Chip |
Brand? Model? | ||||||||||||
Flash1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND) | ||||||||||||
RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> | ||||||||||||
RAM1 Chip |
Brand? Model? | ||||||||||||
ETH chip1 | |||||||||||||
Ethernet Port Count |
1-1GbE-LAN | ||||||||||||
Wired Standard |
IEEE 802.3i/3u/3ab | ||||||||||||
802dot11 OUI: none specified | |||||||||||||
Stock bootloader |
U-Boot | ||||||||||||
Expansion IF types |
USB 2.0 | ||||||||||||
USB ports |
1 | ||||||||||||
USB Hub Compatible |
Untested | ||||||||||||
Power |
12 VDC, 1.5 A | ||||||||||||
Serial Port (UART) |
yes | ||||||||||||
Other | |||||||||||||
| |||||||||||||
3rd Party Firmware Support | |||||||||||||
Radio 1 | |||||||||||||
Chip1 |
MediaTek MT7603EN | ||||||||||||
Wireless interface OUI |
none specified | ||||||||||||
Antenna Connector Type |
none specified | ||||||||||||
MIMO status |
2x2:2 | ||||||||||||
Wireless Standard |
IEEE 802.11b/g/n | ||||||||||||
802.11n |
up to 300 Mbps | ||||||||||||
802.11g |
up to 54 Mbps | ||||||||||||
802.11b |
up to 11 Mbps | ||||||||||||
WiFi Operating Frequency |
2.4 GHz | ||||||||||||
Radio 2 | |||||||||||||
Chip1 |
MediaTek MT7662EN | ||||||||||||
Wireless interface OUI |
none specified | ||||||||||||
Antenna Connector Type |
none specified | ||||||||||||
MIMO status |
2x2:2 | ||||||||||||
Wireless Standard |
IEEE 802.11a/n/ac | ||||||||||||
802.11ac |
up to 867 Mbps | ||||||||||||
802.11n |
up to 300 Mbps | ||||||||||||
802.11a |
up to 54 Mbps | ||||||||||||
WiFi Operating Frequency |
5
OpenWrt GHz | ||||||||||||
|
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented SerComm device with specifications, see SerComm.
Overview
The NA502 Smart Home Gateway enables secure and smart control of home security, heating, lights, and devices. It grants full access to all features offered through a user's subscription plan.
It can support a selection of devices using the Z-Wave, ZigBee and WiFi protocols.
It requires a broadband ethernet connection to operate and connect to the cloud service.
Links of Interest
https://support.meetviva.com/help/na502-smart-home-gateway
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: mt7621
OpenWrt Package architecture: mipsel_24kc
Support started version: 21.02.0
Current supported version: 23.05.5
Unsupported Functions:
BLE and Audio
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: mt7621
OpenWrt Package architecture: mipsel_24kc
Support started version: 21.02.0
Current supported version: 23.05.5
Unsupported Functions:
BLE and Audio
Please insert instructions here
Categories:
- SerComm
- Embedded system/IoT Gateway
- Embedded System MediaTek
- Embedded System MT7621ST
- MediaTek
- Embedded System MIPS 1004Kc
- Embedded System
- OpenWrt Supported
- Embedded System MT7603EN
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System MT7662EN
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation