Senao SL-2000

legacy (DSSS) (DSSS)
access point
WikiDevi.wi-cat.ru	Senao SL-2000
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Senao SL-2000
FCC ID	NI3-SL-2000
Type	access point
CPU1	AMD ElanSC400
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	Samsung Model? x 2
ETH chip1	Realtek RTL8019AS
Ethernet Port Count	1-10MbE-LAN
Wired Standard	IEEE 802.3i
802dot11 OUI: 00:02:6F (28 E, 62 W)
Expansion IF types	PCMCIA (16-bit)
PCMCIA slots	1
Power	6 VDC, 1 A
Connector type	barrel
Serial Port (UART)	DE-9
Flags: partial schematics, block diagram
Other
Default SSID: IEEE802.11 Default IP address: 192.72.10.125 Default login user: default Default login password: default
Retail
FCC approval date	04 June 2001
Radio 1
Radio1 module	Senao SL-2000CD
Radio1 module IF	PCMCIA (16-bit)
Chip1	AMD Am79C930
Chip2	Harris HSP3824
Chip3	Harris HFA3726
Wireless interface OUI	00:02:6F
Antenna Connector Type	unknown
Wireless Standard	legacy (DSSS)

For a list of all currently documented AMD chipsets with specifications, see AMD.
For a list of all currently documented Harris chipsets with specifications, see Harris.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented Senao device with specifications, see Senao.

Overview

The FCC manual for the SL-2000 states...

The the default settings are...

Default Supervisor's and Telnet password: default

Default Web UI credentials: default:default

Default IP address: 192.72.10.125

The weight of the unit is 920g.

The dimensions of the unit are 221mm x 166mm x 33mm

The device accepts 6VDC power (1A specced) and consumes 6W

The FCC manual for the SL-2000CD states...

Normal Output Power: 15dBm

Receive Sensitivity (FER=0.08): -88dBm