Sagemcom F@ST 2804 V5

From TechInfoDepot
(Redirected from Sagemcom F@ST 2804 V2)
Jump to navigationJump to search
multiple revisions of this device, use caution
bgn (N300)
300Mbps Wireless N ADSL2+ Modem Router
Homepage
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Status Unknown
Platform
BrandModelRev
Sagemcom F@ST 2804 V5
FCC ID
none specified
Type
wireless router, dsl modem
CPU1
Broadcom BCM63281
CPU1 Type
BMIPS4350
CPU1 Speed
320 MHz
Flash1 Chip
Spansion S25FL064PIF
Flash1 Size
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip
SK hynix H5PS5162FFR
ETH chip1
Broadcom BCM63281
Switch
Broadcom BCM63281
Ethernet Port Count
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: 7C:03:4C (1 E, 1 W)
Ethernet OUI: 7C:03:4C (1 E, 1 W)

Expansion IF types
USB 2.0
USB ports
2
USB Hub Compatible
Untested
Power
12 VDC, 1 A
Connector type
barrel
Serial Port (UART)
yes, J6
Flags:
ADSL2+
Other

Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1326 additional devices
of which 10 are Sagemcom devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1343 additional devices
of which 8 are Sagemcom devices

Retail
Country of manuf China
Radio 1
Chip1
Broadcom BCM43227
Wireless interface OUI
7C:03:4C
Antenna Connector Type
none specified
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio cor_rev
30
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
Sagemcom F@ST 2804 V5BroadcomBroadcom
Sagemcom F@ST 2804 V7BroadcomBroadcom

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented Sagemcom device with specifications, see Sagemcom.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

8MB Flash, 64MB RAM

The default SSID pattern may be UTEL_HOME_XXXX.

See also

Mira 2011/ Nanya 2012 (HW: 2704_1864) (Sagemcom 2804)