Sagemcom F@ST 2704N V1
From TechInfoDepot
(Redirected from Sagemcom F@ST 2704N)
Jump to navigationJump to searchbgn (N300) | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| wireless router, dsl modem | |||||||||||||||||
| 3rd Party Firmware | |||||||||||||||||
| dd-wrt |
Status Unknown | ||||||||||||||||
| OpenWrt | |||||||||||||||||
| Tomato any flavor |
Status Unknown | ||||||||||||||||
| Gargoyle |
Status Unknown | ||||||||||||||||
| Platform | |||||||||||||||||
| Brand • Model • Rev |
Sagemcom F@ST 2704N v1 | ||||||||||||||||
| FCC ID | |||||||||||||||||
| IC ID | |||||||||||||||||
| US ID |
NS3DL01BFAST2704N | ||||||||||||||||
| Type |
wireless router, dsl modem | ||||||||||||||||
| CPU1 |
Broadcom BCM6318 | ||||||||||||||||
| CPU1 Type |
BMIPS3300 | ||||||||||||||||
| CPU1 Speed |
333 MHz | ||||||||||||||||
| Flash1 Chip |
Brand? Model? | ||||||||||||||||
| Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||||||||||||||
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||||||||||||||
| RAM1 Chip |
Brand? Model? | ||||||||||||||||
| ETH chip1 |
Broadcom BCM6318 | ||||||||||||||||
| Switch |
Broadcom BCM6318 | ||||||||||||||||
| Ethernet Port Count |
4-100MbE-LAN | ||||||||||||||||
| Wired Standard |
IEEE 802.3i/3u | ||||||||||||||||
|
802dot11 OUI: none specified | |||||||||||||||||
| Stock bootloader |
CFE | ||||||||||||||||
| Expansion IF types |
USB 2.0 | ||||||||||||||||
| USB ports |
1 | ||||||||||||||||
| USB Hub Compatible |
Untested | ||||||||||||||||
| Power |
12 VDC, 2.5 A | ||||||||||||||||
| Serial Port (UART) |
yes, 3.3, (115200 8N1) | ||||||||||||||||
|
Flags: ADSL2+ | |||||||||||||||||
| Other | |||||||||||||||||
|
Default SSID: Sagemcom-XXXXXX | |||||||||||||||||
| 3rd Party Firmware Support | |||||||||||||||||
| Retail | |||||||||||||||||
| FCC approval date | 18 December 2013 | ||||||||||||||||
| Country of manuf | China | ||||||||||||||||
| Radio 1 | |||||||||||||||||
| Chip1 |
Broadcom BCM43217 | ||||||||||||||||
| Wireless interface OUI |
none specified | ||||||||||||||||
| Antenna Connector Type |
none specified | ||||||||||||||||
| MIMO status |
2x2:2 | ||||||||||||||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||||||||||||||
| 802.11n |
up to 300 Mbps | ||||||||||||||||
| 802.11g |
up to 54 Mbps | ||||||||||||||||
| 802.11b |
up to 11 Mbps | ||||||||||||||||
| WiFi Operating Frequency |
2.4 GHz | ||||||||||||||||
| Radio cor_rev |
24 | ||||||||||||||||
| |||||||||||||||||
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Sagemcom device with specifications, see Sagemcom.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | DSL will not work at all on devices with BCM63xx DSL chipset (due to unavailability of FLOSS driver for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom DSL, Unsupported: DSL modem and Broadcom BCM63xx for details. |
| This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
| This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
| OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
| Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: bcm63xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_mips32
Support started version: 17.01.0
Current supported version: 22.03.7
Unsupported Functions:
DSL modem, WiFi 2.4GHz partly
On the OpenWrt Wiki
OpenWrt Target: bcm63xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_mips32
Support started version: 17.01.0
Current supported version: 22.03.7
Unsupported Functions:
DSL modem, WiFi 2.4GHz partly
Please insert instructions here
Categories:
- Sagemcom
- Embedded system/wireless router
- Embedded system/dsl modem
- Embedded System Broadcom
- Embedded System BCM6318
- Broadcom
- Embedded System BMIPS3300
- Embedded System
- OpenWrt Was Supported
- Embedded System BCM43217
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation
