Sagemcom F@ST 1704

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
bg (G54)
wireless router, dsl modem
Support
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Status Unknown
Platform
BrandModelRev
Sagemcom F@ST 1704 (Windstream)
FCC ID
IC ID
Type
wireless router, dsl modem
CPU1
Broadcom BCM6338
CPU1 Type
BMIPS3300
CPU1 Speed
240 MHz
Flash1 Chip
Winbond W25Q64BVSIG
Flash1 Size
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Chip
ESMT M12L128168A-7T
ETH chip1
Broadcom BCM6338
Switch
Broadcom BCM5325E
Ethernet Port Count
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: 6C:2E:85
Ethernet OUI: 6C:2E:85

Stock FW OS
Linux 2.6.21.5
Expansion IF types
none specified
Power
12 VDC, 0.8 A
Connector type
barrel
Serial Port (UART)
yes, (115200 8N1)
Flags:
ADSL2+, boot log
Other

Default SSID: WIN_XXXX
Default IP address: 192.168.254.254
the IP 192.168.254.254 is used by 11 additional devices
of which 1 are Sagemcom devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1331 additional devices
of which 8 are Sagemcom devices

Manuf/OEM/ODM
SGE GAW5.6U2B-5 REV1.0
Retail
FCC approval date 09 September 2010
Country of manuf China
Radio 1
Chip1
Broadcom BCM4312
Wireless interface OUI
6C:2E:85
Antenna Connector Type
none specified
Wireless Standard
IEEE 802.11b/g
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
Sagemcom F@ST 1704BroadcomBroadcom
Sagemcom F@ST 1704NBroadcomBroadcom

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented Sagemcom device with specifications, see Sagemcom.

54 Mbps - 2.4GHz 802.11g = G54 class

Overview

"GAW5.6U2B-5" and "REV:1.0 081222" is silkscreened on the board.

This device may be using BCM6338 (CFE identifies as

a BCM96338 design), or possibly BCM6333.

Per the boot log, the device is running Linux.

The default SSID appears to be WIN_XXXX where XXXX is the last

two octets of the WAN interface MAC (upper case hex letters).

The WAN MAC appears to be the wireless interface MAC plus one.

The power adapter included with the device is

a Click CPS012A120080U (12V, 0.8A).

Links of Interest

Teardown

JTAG-Serial Info

Serial

Serial Pinouts

The serial header is above the CPU. The default login

credentials for the serial console are admin:admin.
to BCM4312 <-- [RxD] [TxD] [GND] [VCC] --> to RAM

Boot log

boot log
CFE version 4.26.8 for BCM96338 (32bit,SP,BE)
Build Date: Thu Sep  2 14:49:02 CST 2010 (cookiechen@SZ01007.DONGGUAN.CN)
Copyright (C) 2005-2009 SAGEM Corporation.

Serial flash device: name NX25Q64, id 0xef16, size 8192KB
CPU type 0x29010: 240MHz
Total memory: 16777216 bytes (16MB)
Boot Address 0xbf800000

Board IP address                  : 192.168.1.1:ffffff00
Host IP address                   : 192.168.1.100
Gateway IP address                :
Run from flash/host (f/h)         : f
Default host run file name        : vmlinux
Default host flash file name      : bcm963xx_fs_kernel
Boot delay (0-9 seconds)          : 1
Boot image (0=latest, 1=previous) : 0
Board Id (0-2)                    : F@ST1704
Number of MAC Addresses (1-32)    : 11
Base MAC Address                  : 6c:2e:85:6f:04:d6
PSI Size (1-64) KBytes            : 40

*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Booting from latest image (0xbfc00000) ...
Code Address: 0x80010000, Entry Address: 0x80216000
Decompression OK!
Entry at 0x80216000
Closing network.
Closing DMA Channels.
Starting program at 0x80216000
Linux version 2.6.21.5 (cookiechen@SZ01007.DONGGUAN.CN) 
 (gcc version 4.2.3) #1 Thu Apr 12 11:07:05 CST 2012
Serial flash device: name ID_W25X64, id 0xef16 size 8192KB
F@ST1704 prom init
CPU revision is: 00029010
Determined physical RAM map:
 memory: 00fa0000 @ 00000000 (usable)
On node 0 totalpages: 4000
  DMA zone: 31 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3969 pages, LIFO batch:0
  Normal zone: 0 pages used for memmap
Built 1 zonelists.  Total pages: 3969
Kernel command line: root=31:0 ro noinitrd console=ttyS0,115200
brcm mips: enabling icache and dcache...
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 8kB, 2-way, linesize 16 bytes.
Synthesized TLB refill handler (21 instructions).
Synthesized TLB load handler fastpath (33 instructions).
Synthesized TLB store handler fastpath (33 instructions).
Synthesized TLB modify handler fastpath (32 instructions).
PID hash table entries: 64 (order: 6, 256 bytes)
Using 120.000 MHz high precision timer.
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 13500k/16000k available (1789k kernel code, 
 2500k reserved, 278k data, 88k init, 0k highmem)
KLOB Pool 1 Initialized: 2097152 bytes <0x80c00000 ... 0x80e00000>
Calibrating delay loop... 235.52 BogoMIPS (lpj=117760)
Mount-cache hash table entries: 512
wait instruction: enabled
NET: Registered protocol family 16
Total Flash size: 8192K with 128 sectors
BLOG v2.1 Initialized
NET: Registered protocol family 8
NET: Registered protocol family 20
Time: MIPS clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP reno registered
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
io scheduler noop registered (default)
PPP generic driver version 2.4.2
NET: Registered protocol family 24
bcm963xx_mtd driver v1.0
File system address: 0xbfc00100
brcmboard: brcm_board_init entry
Start wps button kernel thread!
Serial: BCM63XX driver $Revision: 3.00 $
ttyS0 at MMIO 0xfffe0300 (irq = 10) is a BCM63XX
bcmxtmrt: Broadcom BCM6338A2 ATM Network Device v0.1 Apr 12 2012 11:04:27
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 10
NET: Registered protocol family 17
NET: Registered protocol family 15
Initializing MCPD Module
Ebtables v2.0 registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 88k freed
init started:  BusyBox v1.00 (2012.04.12-03:09+0000) multi-call binary
mount: Mounting none on /proc/bus/usb failed: No such file or directory

BusyBox v1.00 (2012.04.12-03:09+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.

Loading drivers and kernel modules...

pktflow: module license 'Proprietary' taints kernel.
Broadcom Packet Flow Cache  Char Driver v2.1 Nov 20 2009 22:59:50 Registered<242>
NBUFF v1.0 Initialized
Broadcom Packet Flow Cache learning via BLOG enabled.
Created Proc FS /procfs/fcache
Broadcom Packet Flow Cache registered with netdev chain
Constructed Broadcom Packet Flow Cache v2.1 Nov 20 2009 22:59:47
bcmxtmcfg: bcmxtmcfg_init entry
adsl: adsl_init entry
IPv6: add_dev failed for dsl0
Broadcom BCM6338A2 Ethernet Network Device v0.3 Apr 12 2012 11:03:31
Config Switch via PHY Through MDIO Pseudo PHY Interface

====> Entered BP_ENET_SWITCH_VIA_INTERNAL_PHY, PDOWN & RESET enet.
BCM63xx_ENET: Auto-negotiation timed-out
BCM63xx_ENET: 10 MB Half-Duplex (assumed)
ethsw: found bcm5325e!
eth0: MAC Address: 6C:2E:85:6F:04:D6
SDIOH mode switch from 1 to 2
available commands: sdio sdioh

---SDIO init SUCCEEDED--- blockmode capable

chipid 0x4014312
chip is bcm4312, use 512 bytes blksize
bcmsdh_attach, sdioh_attach successful, bcmsdh->sdioh 0x80cbed40
wl: srom not detected, using main memory mapped srom info (wombo board)
wl0: wlc_attach: MAC addr from system pool. id:0x776c0000
wl0: MAC Address: 6C:2E:85:6F:04:D7
wl0: Broadcom BCM4318 802.11 Wireless Controller 5.10.146.0.cpe4.404.1
dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
Trying to free already-free IRQ 25

===== Release Version 4.113.4_a4GL_WS_A2pB030l (build timestamp 120412_1107) =====

device eth0 entered promiscuous mode
ADDRCONF(NETDEV_UP): eth0: link is not ready
WLmngr Daemon is running
optarg=0 shmId=0
wlevt_init@107: opened loopback socket 4
wlevt is ready for new msg...
device wl0 entered promiscuous mode
br0: port 2(wl0) entering learning state
br0: topology change detected, propagating
br0: port 2(wl0) entering forwarding state
BcmAdsl_Initialize=0xC007E808, g_pFnNotifyCallback=0xC009EC74
pSdramPHY=0xA0FFFFF8, 0x280724 0x33C9337
AdslCoreSharedMemInit: shareMemAvailable=5072
AdslCoreHwReset:  AdslOemDataAddr = 0xA0FF4044
dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
bcmxtmcfg: Tx Addr 0x80cc87bc, Tx Queue 0x80cc87dc
device wl0 left promiscuous mode
br0: port 2(wl0) entering disabled state
device wl0 entered promiscuous mode
br0: port 2(wl0) entering learning state
br0: topology change detected, propagating
br0: port 2(wl0) entering forwarding state
br0: port 2(wl0) entering disabled state
br0: port 2(wl0) entering learning state
br0: topology change detected, propagating
br0: port 2(wl0) entering forwarding state
br0: port 2(wl0) entering disabled state
wlctl: Unsupported
There is no Predefined DevicePin in CFE
WPS Device PIN = 30254749
Setting SSID "WIN_04D8"
Setting SSID "wl0_Guest1"
Setting SSID "wl0_Guest2"
Setting SSID "wl0_Guest3"
wlctl: Unsupported
wlctl: Unsupported
wlctl: Unsupported
chanspec 0x2b01 selected
br0: port 2(wl0) entering learning state
br0: topology change detected, propagating
br0: port 2(wl0) entering forwarding state
device wl0 left promiscuous mode
br0: port 2(wl0) entering disabled state
device wl0 entered promiscuous mode
br0: port 2(wl0) entering learning state
br0: topology change detected, propagating
br0: port 2(wl0) entering forwarding state
br0: port 2(wl0) entering disabled state
br0: port 2(wl0) entering learning state
br0: topology change detected, propagating
br0: port 2(wl0) entering forwarding state
Reaped 380
UPnP daemon is ready to run


Pictures

User Images