SMC SMCWBR11S-3GN
From TechInfoDepot
Jump to navigationJump to searchbgn (N150) | |||||||
|---|---|---|---|---|---|---|---|
| wireless router | |||||||
| 3rd Party Firmware | |||||||
| dd-wrt |
Status Unknown | ||||||
| OpenWrt | |||||||
| Tomato any flavor |
Incompatible | ||||||
| Gargoyle |
Status Unknown | ||||||
| Platform | |||||||
| Brand • Model • Rev |
SMC SMCWBR11S-3GN | ||||||
| FCC ID | |||||||
| Type |
wireless router | ||||||
| CPU1 |
Ralink RT3050 | ||||||
| CPU1 Type |
MIPS 24KEc | ||||||
| CPU1 Speed |
320 MHz 16-bit | ||||||
| Flash1 Chip |
Macronix MX29LV640DBTC-90G | ||||||
| Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||||
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||||
| RAM1 Chip |
EtronTech EM63A165TS-6G | ||||||
| ETH chip1 |
Ralink RT3050 | ||||||
| Ethernet Port Count |
1-100MbE-WAN 1-100MbE-LAN | ||||||
| Wired Standard |
IEEE 802.3i/3u | ||||||
| Stock bootloader |
U-Boot | ||||||
| Expansion IF types |
USB 2.0 | ||||||
| USB ports |
1 | ||||||
| USB Hub Compatible |
Untested | ||||||
| Power |
12 VDC, 1 A | ||||||
| Connector type |
barrel | ||||||
|
Flags: 3G capable | |||||||
| Other | |||||||
|
Default SSID: SMCWBR11S-3GN_AP | |||||||
| 3rd Party Firmware Support | |||||||
| Retail | |||||||
| FCC approval date | 25 February 2010 | ||||||
| Radio 1 | |||||||
| Chip1 |
Ralink RT3050 | ||||||
| Wireless interface OUI |
00:26:F3, 7E:CD:8E | ||||||
| Antenna Connector Type |
U.FL, RP-SMA | ||||||
| MIMO status |
1x1:1 | ||||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||||
| 802.11n |
up to 150 Mbps | ||||||
| 802.11g |
up to 54 Mbps | ||||||
| 802.11b |
up to 11 Mbps | ||||||
| WiFi Operating Frequency |
2.4 GHz | ||||||
| |||||||
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented SMC device with specifications, see SMC.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
The default SSID in the manual is SMCWBR11S-3GN_AP. Presumed 00:26:F3 and 7E:CD:8E OUIs per WiGLE.
Links of Interest
Product page (SMC Asia)
Manual
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
| This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
| OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 12.09
Current supported version: 22.03.7
Comment:
According to https://dev.openwrt.org/changeset/30434, the SMCWBR11S-3GN is identical to the Accton WR6202, hence linking to the FW images of WR6202
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 12.09
Current supported version: 22.03.7
Comment:
According to https://dev.openwrt.org/changeset/30434, the SMCWBR11S-3GN is identical to the Accton WR6202, hence linking to the FW images of WR6202
Please insert instructions here
