Rosewill RNX-GX4
From TechInfoDepot
Jump to navigationJump to searchbg (G54) | |
|---|---|
| Wireless 802.11G Router | |
 | |
| Wikipedia | |
| InfoDepot Wiki | |
| WikiDevi.wi-cat.ru | |
| 3rd Party Firmware | |
| dd-wrt | |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Rosewill RNX-GX4 |
| FCC ID | |
| Type |
wireless router |
| CPU1 | |
| CPU1 Type |
BMIPS3300 |
| CPU1 Speed |
240 MHz |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
| RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 | |
| Switch | |
| Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
| Wired Standard |
IEEE 802.3/3u |
|
802dot11 OUI: none specified | |
| Expansion IF types |
none specified |
| Power |
9 VDC, 0.7 A |
| Connector type |
barrel |
| Serial Port (UART) |
yes |
| JTAG Port |
yes |
| Other | |
|
Default IP address: 192.168.1.1 | |
| Manuf/OEM/ODM | |
| 3rd Party Firmware Support | |
| Retail | |
| FCC approval date | 14 December 2009 |
| UPC |
898745017045 (UPC DB, On eBay) |
| ASIN |
B003XNN69S  |
| Radio 1 | |
| Chip1 | |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
RP-SMA |
| Wireless Standard |
IEEE 802.11b/g |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 - 2.4835 GHz |
| Radio cor_rev |
13 |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Rosewill device with specifications, see Rosewill.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Overview
OEM Netcore NW618
"PB-730-M04G-30" is silkscreened on the board.
Links of Interest
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
Supported by dd-wrt as of = v.24 SP2 - build 13780 - 20100129
Please insert instructions here
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
| This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
| OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
| Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details. |
Support started version: ?
Current supported version: ?
Comment:
I cannot find any info via google that this device is supported by openwrt
Current supported version: ?
Comment:
I cannot find any info via google that this device is supported by openwrt
Please insert instructions here
