Rosewill L600N
abgn (AN600) | |
---|---|
wireless router | |
Homepage | |
Wikipedia | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt |
Status Unknown |
Tomato any flavor |
Status Unknown |
Platform | |
Brand • Model • Rev |
Rosewill L600N |
FCC ID | |
Type |
wireless router |
CPU1 |
Broadcom BCM5358UB0 |
CPU1 Type |
MIPS 74K |
CPU1 Speed |
500 MHz |
Flash1 Chip |
Macronix MX25L6406E |
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip |
Samsung K4H511638J-LCCC |
ETH chip1 |
Broadcom BCM5358UB0 |
Switch |
Broadcom BCM5358UB0 |
Ethernet Port Count |
1-WAN 4-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
802dot11 OUI: none specified | |
Expansion IF types |
USB 2.0 |
USB ports |
1 |
USB Hub Compatible |
Untested |
Power |
12 VDC, 1 A |
Connector type |
barrel |
Other | |
Default IP address: 192.168.1.1 | |
Manuf/OEM/ODM | |
Retail | |
FCC approval date | 09 November 2012 |
(Est.) release date | 23 October 2012 |
UPC |
898745051834 (UPC DB, On eBay) |
ASIN | B009VKOMJK |
Country of manuf | China |
Radio 1 | |
Chip1 |
Broadcom BCM5358UB0 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
RP-SMA |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio cor_rev |
28 |
Radio 2 | |
Chip1 |
Broadcom BCM43236 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
RP-SMA |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11a/n |
802.11n |
up to 300 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
Radio cor_rev |
24 |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Rosewill device with specifications, see Rosewill.
Overview
Per Rosewill, this device uses a Broadcom SoC (says BCM5358), has 8MB Flash, and has 64MB RAM.
Per the manual, the device uses BCM5358U (presumed B0 rev.) and BCM43236. However, the manual states the device has 32MB RAM..
Per the manual, the default SSIDs are RW-2.4G-XXX and RW-5G-XXX.
The MAC label on the board in the FCC internal photos may have an OUI of 00:1F:A4 (Shenzhen Gongjin Electronics).
- There are some entries for the RX-2.4G-XXX pattern on WiGLE (all RW-2.4G-001). There is a single RW-5G-001 entry as well, but the BSSID may be bogus...
Links of Interest
- Rosewill L600N support? on the DD-WRT Forum
- Commit adding untested support to Shibby's Tomato builds (and allowing for TomatoAnon model detection
Pictures
- Rosewill
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM5358UB0
- Broadcom
- Embedded System MIPS 74K
- Embedded System
- Manuf SGE
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System BCM43236
- Embedded System IEEE 802.11a/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation