ReadyNet VWRT510

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
wireless router, analog phone gateway
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
ReadyNet VWRT510
FCC ID
Type
wireless router, analog phone gateway
CPU1
CPU1 Type
MIPS 24KEc
CPU1 Speed
not specified
Flash1 Chip
Winbond Model?
Flash1 Size
? MiB
RAM1 Size
64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip
Winbond W9751G6KB-25
ETH chip1
Switch
Ethernet Port Count
1-100MbE-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types
none specified
Power
? VDC, ? A
Connector type
barrel
Other

Default IP address: 192.168.11.1
the IP 192.168.11.1 is used by 32 additional devices
of which 1 are ReadyNet devices

Retail
FCC approval date 05 September 2013
Country of manuf China
Radio 1
Chip1
Wireless interface OUI
none specified
Antenna Connector Type
U.FL
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"G801_V3_1" appears to be silkscreened on the board in the FCC photos (along with addl. PCB text ["MS-ME198407", "94V-0", manuf. date / part lot, etc]).

This device is using a nuvoton audio chip.

The default IP is per the FCC manual.

The web interface shown in the manual looks rather similar (if not identical) to the DD-WRT interface.