Radxa CM5
From TechInfoDepot
Jump to navigationJump to search
Radxa CM5
Radxa CM5 is a series System-on-Module based on the RK3588/RK3588S, containing processor, memory, eMMC Flash and Power Management Unit.
- These modules allow a designer to leverage the ROCK5 software stack in their own custom systems and form factors.
In addition these modules have extra IO interfaces over and above what is available on the ROCK5 boards, opening up more options for the designer.
- CM5, compatible with Radxa CM3 and Raspberry Pi CM4 in pinout and form factor
- NX5, compatible with Nvidia Jetson Nano / TX2 NX / XAVIER NX, SODIMM form factor
Specification
| Raspberry Pi CM4 | Radxa CM3 | Radxa CM5 |
|---|---|---|
| Broadcom BCM2711 @1.5GHz (64-bit) Quad core ARM (Cortex-A72) |
Rockchip RK3566 @2.0GHz (64-bit) Quad core ARM (Cortex-A55) |
Rockchip RK3588S (64-bit) Quad core ARM (Cortex-A76) @2.4GHz + Quad core ARM (Cortex-A55) @1.8GHz |
| Small Footprint 55×40×4.7mm module | Small Footprint 55×40×4.7mm module | Small Footprint 55×40×4.7mm module |
| Options for 1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM with ECC |
Options for 1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM with ECC |
Options for 4GB or 8GB or 16GB LPDDR4x-4224 SDRAM |
| Options for 0GB (CM4 Lite), 8GB, 16GB, or 32GB eMMC Flash memory, Peak eMMC BW 100MB/s |
Options for 0GB, 8GB, 16GB, 32GB, 64GB, 128GB eMMC Flash memory, Peak eMMC BW 250MB/s |
Options for 0GB, 8GB, 16GB, 32GB, 64GB, 128GB eMMC Flash memory, Peak eMMC BW 250MB/s |
| Option for Wi-Fi 5/BT 5.0 | Option for Wi-Fi 5/BT 5.0 | None |
| Gigabit Ethernet PHY, supporting IEEE 1588 | Gigabit Ethernet PHY (RTL8211F), optional IEEE 1588 support |
1x GMAC, without PHY on SoM |
| 1× USB 2.0 port (highspeed) | 1x USB 2.0 port (highspeed), 1x USB 3.0 port (5Gbps) |
1x USB 2.0 port, 1x USB-C 3.1 port (5Gbps), 1x USB 3.0 host port |
| 1× PCIe 1-lane host, Gen 2 (5Gbps) | 1x PCIe 1-lane host, Gen 2 (5Gbps) | 2x PCIe 1-lan host, Gen 2.1 (5Gbps) |
| N/A | 2x SATA ports, one shared with USB 3.0, one shared with PCIe |
2x SATA ports, one shared with USB 3.0, one shared with PCIe |
| 2x HDMI 2.0 (up to 4K60) | 1x HDMI (up to 4K60) | 1x HDMI (up to 8K60) |
| MIPI DSI: 1× 2-lane MIPI DSI display port 1× 4-lane MIPI DSI display port |
MIPI DSI: 2× 4-lane MIPI DSI display port (MIPI DSI0/DSI1) 1x 4-lane LVDS support (shared with MIPI DSI0) |
MIPI DSI: 2× 4-lane MIPI DSI display port (MIPI DSI0/DSI1) |
| MIPI CSI-2: - 1× 2-lane MIPI CSI camera port - 1× 4-lane MIPI CSI camera port |
MIPI CSI-2: - 1× 2-lane MIPI CSI camera port - 1× 4-lane MIPI CSI camera port |
MIPI CSI-2: - 1× 2-lane MIPI CSI camera port - 1× 4-lane MIPI CSI camera port |
| - | eDP: - 1x eDP up to 4K60 | eDP: - 1x eDP up to 8K60 (shared with HDMI) |
| 1× SDIO 2.0 (CM4 Lite only) | 1x SDIO 3.0 | 1x SDIO 3.0 |
| N/A | Audio Codec | - |
| 28× GPIO supporting either 1.8v or 3.3v signalling and peripheral options: - Up to 5× UART - Up to 5× I2C - Up to 5× SPI - 1× SDIO interface - 1× PCM Up to - 2× PWM channels - 1× DPI (Parallel RGB Display) - Up to 3× GPCLK outputs |
50× GPIO supporting either 1.8v or 3.3v signalling and peripheral options: - Up to 8× UART - Up to 8× I2C - Up to 4× SPI - 1× SDIO interface - 1× PCM - Up to 8 × PWM channels - 2x ADC |
50× GPIO supporting either 1.8v or 3.3v signalling and peripheral options: - Up to 8× UART - Up to 8× I2C - Up to 4× SPI - 1× SDIO interface - 1× PCM - Up to 8× PWM channels - 2x ADC |
| Single +5v PSU input | Single +5v PSU input | Single +5v PSU input |
| 2x 100-Pin B2B connector | 3x 100-Pin B2B connector | 3x 100-Pin B2B connector |
