Proxim ORiNOCO AP-2000
access point | |
WikiDevi.wi-cat.ru | |
---|---|
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt |
Status Unknown |
Tomato any flavor |
Incompatible |
Platform | |
Brand • Model • Rev |
Proxim AP-2000 |
Type |
access point |
CPU1 |
Intel StrongARM SA-110 |
CPU1 Type |
ARM |
CPU1 Speed |
233 MHz |
Flash1 Chip |
STMicro M58LW0320-110N6 x 2 |
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Chip |
ICSI IS42S16400-7T x 2 |
ETH chip1 |
National Semiconductor DP83815 |
Ethernet Port Count |
1-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
| |
Stock FW OS |
VxWorks |
Expansion IF types |
PCMCIA (32-bit) |
PCMCIA slots |
2 |
Power |
5 VDC, 5 A |
Connector type |
other |
Serial Port (UART) |
yes, console, DE-9 |
Other | |
Default SSID: My Wireless Network A (6 addl. devices) | |
Retail | |
Availability | End of Life |
For a list of all currently documented Intel StrongARM SoC's with specifications, see Intel StrongARM.
For a list of all currently documented NSC (Fairchild) SoC's with specifications, see NSC.
For a list of all currently documented Proxim device with specifications, see Proxim.
Overview
Although wikidevi.wi-cat.ru shows wifi on this device, there is no indication that any PCMIA cards are installed in this new.
Device uses a StrongARM SA-110 (part number 21281EB), Intel 21285AB, TI PCIbus PCI1225PDV for the PC Card controller, and DP83815CVNG for the ethernet controller.
The AP-2000 (with Lucent/Agere/Proxim's firmware) can function as a 802.11b access point using an ORiNOCO PC Card or ORiNOCO PC Card (Ruby), an 802.11bg access point using a Proxim 8800-FC, and an 802.11a access point using an Agere PC50E-8-FC/A.
Sold by Dell as the TrueMobile 1170.
Some AP2ks have native POE capability - for example, the Agere ORiNOCO AP-2000 AE. This specific one, as shown in the photos, specifically does not appear to. The non-POE capable AP-2ks could use optional POE splitters, which were frequently used with a proprietary PowerDsine 48V system.