You do not need an accout to report a problem with the wiki.
-
pakedge WR-1
abgn+ac (AC1200) | |
---|---|
802.11ac Dual Band Wireless Router | |
Homepage | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
pakedge WR-10.20 LFP v1.00 |
FCC ID | |
IC ID | |
Board ID |
7016A1374004 |
Type |
wireless router |
CPU1 |
Qualcomm IPQ4018 |
CPU1 Type |
ARMv7 Cortex-A7 |
CPU1 Speed |
717 MHz ( 4 cores ) |
Flash1 Chip |
Spansion S25FL256SAIFR0 |
Flash1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (SPI NOR) |
RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (DDR3L SDRAM) |
RAM1 Chip |
Nanya NT5CC128M16IP-DI |
ETH chip1 |
Qualcomm IPQ4018 |
Switch |
Qualcomm Atheros QCA8075 |
Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
802dot11 OUI: none specified | |
Stock bootloader |
U-Boot |
Expansion IF types |
USB 2.0 |
USB ports |
1 |
USB Hub Compatible |
Untested |
Power |
12 VDC, 1.5 A |
Connector type |
barrel 5.5 mm (OD) 2.5 mm (ID) 9.5 mm (LEN) |
Serial Port (UART) |
yes, 4-pin header, populated, 3.3V TTL, (115200 8N1), J5 |
Flags: Wave2, MU-MIMO | |
Additional chips | |
Other | |
Default IP address: 192.168.1.1 | |
Manuf/OEM/ODM | |
3rd Party Firmware Support | |
Retail | |
FCC approval date | 07 September 2017 |
(Est.) initial retail price (in USD): | $300 |
Country of manuf | Taiwan |
Radio 1 | |
Chip1 |
Qualcomm IPQ4018 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11a/n/ac |
802.11ac |
up to 867 Mbps |
802.11n |
up to 300 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
Radio 2 | |
Chip1 |
Qualcomm IPQ4018 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented pakedge device with specifications, see pakedge.
Overview
"WR-1-0.20 LFP" is silkscreened on the board in the FCC photos.
- OEM: Senao (PCB ID: 7016A1374004)
The user manual on the FCC suggests that the default username/password is pakedge/pakedger but the label sample says admin/admin.
Links of Interest
Hardware specification
- CPU: Qualcomm IPQ4018 @717MHz Quad-Core ARM (Cortex-A7)
- Storage: 32MB (SPI NOR) Flash
- Memory: 256MB (DDR3L) SDRAM
- WiFi: 802.11bgn (2.4GHz), 802.11an/ac (5GHz)
- Network: 5x Gigabit Ethernet ports
- USB: 1x USB 2.0 ports
- Power: 12V/1.5A via barrel
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
OpenWrt Target: ipq40xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_cortex-a7_neon-vfpv4
Support started version: 23.05.0
Current supported version: 23.05.5
Please insert instructions here
Pictures
- Pakedge
- Embedded system/wireless router
- Embedded System Qualcomm
- Embedded System IPQ4018
- Qualcomm
- Embedded System ARMv7
- Embedded System Cortex-A7
- Embedded System Qualcomm Atheros
- Embedded System QCA8075
- Qualcomm Atheros
- Manuf Senao
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11a/n/ac
- Embedded System IEEE 802.11b/g/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation